NI Vision Acquisition Software 2016.02 LabVIEW2015SP1 Win32/64Eng 视觉采集软件VAS2016February下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Acquisition Software 2016.02 LabVIEW2015SP1 Win32/64Eng 视觉采集软件VAS2016February下载
视觉采集软件是相机驱动程序，包含了常用的IMAQdx驱动，可以驱动支持标准协议的1394相机、Gige千兆网相机、USB3.0相机，CameraLink相机等。
文件大小: 2418695211 字节 (2.25 GB)
修改日期: 2016-03-23 13:23
MD5: d6524cf449fff15c2cabfe6a6f082973（官方正确）
SHA1: 1d9015699c8a15844a1e44846efcc16dd861f579
SHA256: 0d0b10346530a38c27bc928c296c33c0a8d26589ebf9f611b03f4fde29af8d3c
CRC32: e1275eda
Download Language: English
Product Line: Vision Software
Version: February 2016
Release date: 03-08-2016
Software type: Driver
Operating system: Windows 10; Windows 8.1; Windows 7; Windows Vista; Windows XP (SP3) 32-bit; Windows Server 2012 R2 64-bit; Windows Server 2008 R2 64-bit; Windows Server 2003 R2 32-bit
[*]Support for LabVIEW 2015 SP1 (32- and 64-bit)
[*]GenICam 3.0 support for GigE Vision and USB3 Vision cameras
[*]Support for NI CVS-1459 running Windows Embedded Standard 7
[*]Support for cameras using the Mono10p pixel format
百度网盘下载：
标准下载：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
NI下载器下载：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址（可能无效或无法下载完成）：
标准下载地址：
请购买附件下载查看
NI下载器下载：
请购买附件下载查看
NI Vision Acquisition Software Release NotesFebruary 2016This file contains important information about National Instruments Vision Acquisition Software, including installation instructions, new features, fixed issues, and known issues.Overview
System Requirements
NI Application Software Support
New Features
Updates and Improvements
Installation Instructions
Configuring NI-IMAQ
Configuring NI-IMAQdx
Automating the Installation of NI Products
Known Issues
Documentation and Examples
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal InformationOverviewNI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Acquisition Software.NI Vision Acquisition Software includes the following drivers:
[*]NI-IMAQ is driver software for the following device types:
[*]NI 17xx smart cameras
[*]analog cameras
[*]parallel digital cameras
[*]Camera Link cameras
[*]NI-IMAQdx is driver software for the following device types:
[*]NI 177x smart cameras
[*]GigE Vision-compliant cameras
[*]USB3 Vision-compliant cameras
[*]IIDC/DCAM-compliant IEEE 1394 cameras
[*]DirectShow-compatible cameras
[*]Basler and Axis IP cameras
[*]NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:
[*]NI CVS-1457RT
[*]NI CVS-1458
[*]NI CVS-1458RT
[*]NI CVS-1459
[*]NI CVS-1459RT
[*]NI EVS-1463RT
[*]NI EVS-1464RT
[*]NI PCI-8254R
[*]NI PCIe-8255R
[*]NI PCIe-8237R
[*]NI PCIe-1473R
[*]NI PCIe-1473R-LX110
[*]NI 1483 FlexRIO Adapter Module
[*]Note: New versions of Vision Acquisition Software no longer support the following hardware:
[*]NI 1762 and 1764 Smart Cameras
[*]NI CVS-1454, 1455, and 1456 Compact Vision Systems
Additional Driver SoftwareSome hardware requires driver software in addition to Vision Acquisition Software drivers. Refer to the National Instruments website at ni.com/drivers for information about these drivers.
[*]The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.
[*]The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
System RequirementsThe development computer must meet the following requirements to run NI Vision Acquisition Software:
ProcessorPentium 4 1 GHz or equivalent
Memory512 MB RAM
Display1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended
Free Hard Disk SpaceNI Vision Acquisition Software3.5 GB
NI-IMAQ1.5 GB
NI-IMAQdx1.5 GB
NI-IMAQ I/O2.5 GB
Operating System
[*]Windows 10
[*]Windows 8.1 (32- and 64-bit)
[*]Windows 7 SP1 (32- and 64-bit)
[*]Windows Vista SP1 (32- and 64-bit)
[*]Windows XP SP3 (32-bit)
[*]Windows Server 2012 R2 (64-bit)
[*]Windows Server 2008 R2 SP2 (64-bit)
[*]Windows Server 2003 R2 SP2 (32-bit)
NI Application Software SupportThe following table lists the NI application software versions, including service packs, supported by the NI Vision Acquisition Software. The installer specifically allows side-by-side installations of NI Vision Acquisition Software for each of the supported versions of LabVIEW, enabling you to use the NI Vision Acquisition Software with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Vision Acquisition Software.
NI Application SoftwareVersions Supported by NI Vision Acquisition Software
NI LabVIEW2012, 2013, 2014, 2015
NI LabVIEW Real-Time Module2012, 2013, 2014, 2015
NI LabVIEW FPGA Module2012, 2013, 2014, 2015
NI LabWindows™/CVI™2010, 2012, 2013, 2015
NI Vision Development Module7.1 or later
NI Vision Builder for Automated Inspection2.5 or later
NI Vision Acquisition Software .NET SupportNI Vision Acquisition Software February 2014 was the last version to release updated support for the .NET Framework 2.0, .NET Framework 3.5, and .NET language integration into Visual Studio 2005 and Visual Studio 2008. Visual Studio 2010 and later are not supported.New versions of NI Vision Acquisition Software will not provide new .NET feature support or development. It is recommended that you begin new development in other supported development environments.New FeaturesThis release of NI Vision Acquisition Software includes the following new features.NI-IMAQ 15.5
[*]Support for LabVIEW 2015 SP1 (32- and 64-bit)
NI-IMAQdx 15.5
[*]GenICam 3.0 support for GigE Vision and USB3 Vision cameras
[*]Support for NI CVS-1459 running Windows Embedded Standard 7
[*]Support for 64-bit LabWindows/CVI and Microsoft Visual C/C++ applications
[*]Support for LabVIEW 2015 SP1 (32- and 64-bit)
[*]Support for cameras using the Mono10p pixel format
[*]Support for cameras using the following aliases for existing decoders:
[*]YCbCr601_411_8_CbYYCrY
[*]YCbCr601_422_8_CbYCrY
[*]YUV422_8
[*]YCbCr601_422_8
[*]YCbCr601_8_CbYCr
[*]RGB10
[*]RGB12
[*]RGB14
[*]YUV411_8_UYYVYY
[*]YUV422_8_UYVY
[*]YUV8_UYV
[*]YUYVPacked
NI-IMAQ I/O 15.5
[*]Support for NI CVS-1459 running Windows Embedded Standard 7
[*]Support for LabVIEW 2015 SP1 (32- and 64-bit)
Updates and ImprovementsThe following list describes issues in previous versions of NI Vision Acquisition Software that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI Vision Acquisition Software.
IDFixed Issue
42016NI-IMAQdx examples for Microsoft Visual C/C++ do not compile as provided in Visual Studio 2012 or higher.
424304, 501866Various crash and stability issues with NI Vision Acquisition Software in MAX.
469231Vision real-time targets can be added to LabVIEW projects in versions of LabVIEW for which they are not supported.
522518Camera Link examples for the NI 1483, NI PCIe-1473R, and NI PCIe-1473R-LX110 return error -2628 when trying to compile LabVIEW FPGA code on Japanese localized versions of Windows.
530670Some USB3 Vision cameras plugged into USB 2.0 ports may return Unknown USB3 Error 0xBFF6903B.
537214An incorrect message to enable jumbo frames is given when jumbo frame packet size is set above 9000 bytes.
540612Vision RIO devices sometimes do not detect edges on TTL 7.
542751NI-IMAQ interface files are not regenerated by MAX if the files are deleted from disk.
546535Added support for cameras using aliases for existing decoders. Refer to the New Features for NI-IMAQdx 15.5.
549733NI-IMAQ boards have mismatched interface names and serial numbers in MAX.
552283Image metadata is not preserved during acquisition when not using the High Performance GigE Vision Driver.
554321Some GigE Vision cameras are not discoverable in MAX using NI-IMAQdx 15.0 from Vision Acquisition Software August 2015.
554693Errors generated within NI-IMAQdx do not override warnings passed in to the driver.
557772Duplicate USB3 Vision devices can appear in MAX if the devices are associated with a third party driver, potentially generating multiple error dialogs that make driver switching difficult.
561199The last few bytes of image data can be corrupted for certain image sizes when using USB3 Vision cameras on ARM-based NI Linux Real-Time systems.
565873Some GigE Vision cameras hang when saving the camera configuration in MAX.
568933Crash when acquiring from GigE Vision cameras using the High Performance GigE Vision Driver on Windows XP.
568947Changing the interface of an NI-IMAQ device in MAX does not persist.
569251On some Windows XP systems, GigE Vision acquisitions do not correctly populate the Actual Height metadata field of a returned image.
Installation InstructionsComplete the following steps to install NI Vision Acquisition Software.Note: You must have administrator access to install NI Vision Acquisition Software.
[*]Insert the NI Vision Acquisition Software installation media.
[*]If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
[*]Follow the onscreen instructions.
NI-IMAQ and NI-IMAQdx integrate with NI Measurement & Automation Explorer (MAX), the National Instruments utility for configuring and testing your measurement and automation system. The NI MAX icon appears on your desktop after you install NI Vision Acquisition Software.Installing from an NI Software Suite or NI Product BundleIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.Configuring NI-IMAQComplete the following steps to install an image acquisition device and configure NI-IMAQ.Note: You must install NI-IMAQ before installing your image acquisition device.Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged.
[*]Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
[*]Run NI MAX.
[*]Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
[*]Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
[*]Select a camera file, and acquire an image.
[*]Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
[*]Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
[*]To change the camera settings, modify the parameters at the bottom of the image viewer panel.
[*]You can acquire an image in the following ways:
[*]Use the Snap button to acquire and display a single image with the image acquisition device.
[*]Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com.Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with NI MAX.Configuring a Remote PXI/Compact PCIe Image Acquisition DeviceUse NI MAX to install NI-IMAQ for LabVIEW Real-Time from the host machine onto the target system. The NI-IMAQ for LabVIEW Real-Time components enable the remote device to acquire and analyze images as directed by the host machine.Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the NI MAX help window to install software.Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices.
[*]Launch NI MAX.
[*]In the Configuration tree, expand Remote Systems.
[*]Expand the appropriate system.
[*]Expand Devices and Interfaces.
[*]Expand NI-IMAQ Devices.
[*]Expand the device you want to configure.
Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the NI MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.Configuring NI-IMAQdxComplete the following steps to configure NI-IMAQdx.If you are using a USB camera, ensure that the camera is compatible with DirectShow, and that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation.Instructions for configuring an IEEE 1394 or GigE Vision camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx.Installing the High Performance GigE Vision DriverIf you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps.Windows 10/8.1/7/Vista/Server 2012/Server 2008
[*]Install the NIC.
[*]Right-click the NIC in the Device Manager, and select Update Driver.
[*]Choose Browse my computer for driver software.
[*]Browse to the driver location. The newest driver version is installed to <National Instruments>\NI-IMAQdx\Staging\NI GigEVision\Current.
[*]Click Next.
[*]Click Close.
Windows XP and Windows Server 2003
[*]Install the NIC.
[*]If Windows does not prompt you to choose a driver, proceed to step 2.
[*]If Windows prompts you to choose a driver, proceed to step 3.
[*]Right-click the NIC in the Device Manager, and select Update Driver.
[*]Choose not to connect to the Windows Update Web site, and click Next.
[*]Choose to Install from a list or a specific location, and click Next.
[*]Choose Don't Search. I will choose the driver to install.
[*]Click Next.
[*]Select National Instruments GigE Vision driver from the list, and click Next. The driver version that is compatible with Windows XP and Windows Server 2003 is installed to <National Instruments>\NI-IMAQdx\Staging\NI GigEVision\WHQL.
[*]Click Finish.
Installing the Universal GigE Vision DriverNI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps.
[*]Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.
[*]Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.
[*]Right-click the NIC in the Device Manager, and select Properties.
[*]Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.
[*]Select the largest frame size available and click OK.
Note: The procedure for enabling jumbo frames on your NIC may vary by manufacturer. Refer to the NIC device documentation for more information about enabling jumbo frames.[*]Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.
Configuring Multiple Ports (Windows XP only)If you plan to use multiple ports with NI-IMAQdx, complete the following steps.
[*]Open the Network Connections window in Windows, and select all of the ports that cameras will be connected to by holding <Ctrl> while clicking each port.
[*]Right-click one of the selected ports, and choose Bridge Connections.Note: If you are not using the High Performance GigE Vision Driver, you will be unable to use jumbo frames on bridged devices.
Configuring NI-IMAQdx for WindowsComplete the following steps to configure NI-IMAQdx for Windows.
[*]Connect the camera.
[*]Run NI MAX.
[*]Double-click the NI MAX icon on your desktop. You can use NI MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.
[*]Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
[*]For IEEE 1394 and USB3 Vision cameras, NI-IMAQdx may not be associated with the camera if a third-party driver is installed. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.
[*]Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window.Configuring NI-IMAQdx for the LabVIEW Real-Time ModuleIf you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx.
[*]Install NI-IMAQdx software on your Windows development machine.
[*]Ensure that your RT target is connected to the same subnet as the Windows development machine.
[*]Run NI MAX.
[*]Double-click the NI MAX icon on your desktop.
[*]Expand the Remote Systems list in the configuration tree.
[*]Select your RT target in the list.
[*]Configure your network settings. Refer to the Remote Systems Help in NI MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
[*]Install NI-IMAQdx on the Real-Time target, using one of the following options:
[*]Recommended Software Set on supported Smart Cameras, Embedded Vision Systems, Compact Vision Systems, and CompactRIO controllers
[*]Click the Software item below the RT target in the configuration tree.
[*]Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.
[*]Select Vision Software or NI CompactRIO under the version of the LabVIEW Real-Time Module you are using.
[*]Click Next.
[*]Select any additional add-ons you would like to install to the target machine. For some real-time targets, such as CompactRIO controllers, NI-IMAQdx or supported camera types will appear as an add-on.
[*]Click Next. Review the list of software you selected to install.
[*]Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.
[*]Click Finish.
[*]Custom installation
[*]Click the Software item below the RT target in the configuration tree.
[*]Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.
[*]If you are given a choice of Recommended Software Sets, choose custom software installation and click Next to proceed with a custom installation.
[*]Select NI-IMAQdx, as well as any additional software you would like to install on the target machine.
[*]Click Next. Review the list of software you selected to install.
[*]Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.
[*]Click Finish.
[*]Connect your camera to your remote system.
[*]Press <F5> to refresh the NI MAX configuration tree. Your camera should be listed in the Remote Systems list.Tip: Press <F5> to refresh the configuration tree whenever you connect a new device to an RT target.
[*]Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
[*]Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Known Issues
[*]Runtime installers are localized for deployment, but the development support installers are not. This could lead to a partially localized installation from a custom-built installer.
[*]Some NI Vision Acquisition Software examples listed in NI Example Finder in LabWindows/CVI do not launch properly from the Task view. You can launch them from the Directory Structure view, or you can access the examples from the installed location instead:
[*]Windows 10/8.1/7/Vista/Server 2012/Server2008—version\samples
[*]Windows XP/Server 2003—version\samples
NI-IMAQ
[*]Changing the interface of an NI-IMAQ device in MAX requires a Refresh (F5) for the update to complete.
[*]In LabVIEW 2012, error codes returned during a property node read or write are not being reported correctly. The status flag is set correctly to notify you that an error occurred, but the code is set to an invalid value.
NI-IMAQdx
[*]Volume License Manager attempts to check out available NI Vision Development Module licenses before trying NI Vision Acquisition Software licenses.
[*]Attempts to extend the evaluation period for NI Vision Acquisition Software licenses from within LabVIEW or the LabVIEW Runtime are unsuccessful in connecting to the internet.
[*]Renaming a camera on some real-time targets may take a long time to complete.
NI-IMAQ I/O
[*]On real-time Compact Vision Systems, serial configuration is not available in MAX. Programmatic configuration is still available in Vision Builder AI and LabVIEW.
[*]Only one NI PCIe-1473R framegrabber can use the virtual serial port at a time.
[*]LabVIEW projects targeting the DRAM banks on the PCIe-1473R may give a configuration error when attempting to compile bitstreams. In certain combinations of LabVIEW and NI FlexRIO 14.5 or older, the instructions to fix this issue may be incorrect.
Documentation and ExamplesDocumentation and examples are installed onto your hard drive with NI Vision Acquisition Software. To view the documentation, select Start»All Programs»National Instruments»Vision»Documentation and then select the driver documentation. You can also navigate to <Users>\Public\Public Documents\National Instruments. Some application-specific documents are installed to the application help folder, as listed in the following sections.Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation.NI Vision Acquisition Software Documentation for NI MAX
[*]You can access the Measurement & Automation Explorer Help for NI-IMAQ and the Measurement & Automation Explorer Help for NI-IMAQdx from the NI MAX Help menu by selecting Help»Help Topics»NI Vision. These documents are installed to <National Instruments>\MAX\Help.
NI Vision Acquisition Software Documentation for LabVIEW
[*]You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.
[*]NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to <LabVIEW> is the location LabVIEW is installed.
NI Vision Acquisition Software Documentation for LabWindows/CVI
[*]NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.
[*]NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.
[*]Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>\CVI\Bin.
[*]Example programs are installed to
[*]Windows 10/8.1/7/Vista/Server 2012/Server2008—version\samples
[*]Windows XP/Server 2003—version\samples
NI Vision Acquisition Software for Eclipse and other Text-based Development Environments
[*]Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <National Instruments>\Vision\Help.
[*]To view text-based example programs, select Start»All Programs»National Instruments»Vision»Examples, and then select the driver you want to see examples for. You can also navigate to <Users>\Public\Public Documents\National Instruments.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.NoteNI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch NI MAX either from the Apps view or from within NI Launcher.Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.1 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.1 DesktopStart screenRight-click application and select Pin to Start
Windows 8.1 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, click the down arrow on the bottom left of the screen.For more information about NI support for Windows 8.1, visit ni.com/windows8.NI Vision Acquisition Software Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016NI Vision Acquisition Software will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI Vision Acquisition Software that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows™/CVI™cvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle
Legal InformationCopyright© 2016 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.375130B-01 就开始复活赛发货
页:
[1]