NI Vision Acquisition Software 2017.05 LabVIEW2017 Win32/64Eng 视觉采集软件VAS_2017_05下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Acquisition Software 2017.05 LabVIEW2017 Win32/64Eng 视觉采集软件VAS_2017_05下载
NI在2017年5月发布了一版VAS视觉采集软件，版本号为May 2017，官方命名版本号为VAS_2017_05。VAS2017.05晚于17年3月发布的LabVIEW2017，所以该版本是可以支持LabVIEW2017的。可以用于LabVIEW2017、VDM201、VBAI2015F3版本。
文件大小: 3029151064 字节 (2.82 GB)
修改日期: 2017-04-25 18:48
MD5: c99a5ddb57d4898f488e8486008b40b3（官方正确）
SHA1: 1c545b581815c960b1ef2e35cbe4a292b9c43ffa
SHA256: a353fc6f1bf2e96433137aea2dc25c50a2587ffda939fa5747001db205493f2a
CRC32: 4092d7d4
百度网盘下载：
标准下载：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
NI下载器下载：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址（可能无效或无法下载完成）：
标准下载：
请购买附件下载查看
NI下载器下载：
请购买附件下载查看
NI Vision Acquisition Software ReadmeMay 2017This file contains important information about National Instruments Vision Acquisition Software, including installation instructions, new features, fixed issues, and known issues.Overview
System Requirements
Product Security and Critical Updates
NI Application Software Support
New Features
Updates and Improvements
Known Issues
Installation Instructions
Configuring NI-IMAQ
Configuring NI-IMAQdx
Automating the Installation of NI Products
Documentation and Examples
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal InformationOverviewNI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Acquisition Software.NI Vision Acquisition Software includes the following drivers:
[*]NI-IMAQ is driver software for the following device types:
[*]NI 17xx smart cameras
[*]analog cameras
[*]parallel digital cameras
[*]Camera Link cameras
[*]NI-IMAQdx is driver software for the following device types:
[*]NI 177x smart cameras
[*]ISC-178x real-time smart cameras—see the Known Issues section regarding real-time Compact Vision Systems and ISC-178x smart cameras
[*]GigE Vision-compliant cameras
[*]USB3 Vision-compliant cameras
[*]IIDC/DCAM-compliant IEEE 1394 cameras
[*]DirectShow-compatible cameras
[*]Basler and Axis IP cameras
[*]NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:
[*]NI CVS-1457RT
[*]NI CVS-1458
[*]NI CVS-1458RT—see the Known Issues section
[*]NI CVS-1459
[*]NI CVS-1459RT—see the Known Issues section
[*]NI EVS-1463
[*]NI EVS-1463RT
[*]NI EVS-1464
[*]NI EVS-1464RT
[*]NI PCI-8254R
[*]NI PCIe-8255R
[*]NI PCIe-8237R
[*]NI PCIe-1473R
[*]NI PCIe-1473R-LX110
[*]NI 1483 FlexRIO Adapter Module
[*]Note: New versions of Vision Acquisition Software no longer support the following hardware:
[*]NI 1762 and 1764 Smart Cameras
[*]NI CVS-1454, 1455, and 1456 Compact Vision Systems
[*]Note: The EVS-146x series of controllers are not supported in LabVIEW 2016 or later.
Additional Driver SoftwareSome hardware requires driver software in addition to Vision Acquisition Software drivers. Refer to the National Instruments website at ni.com/drivers for information about these drivers.
[*]The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.
[*]The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
System RequirementsThe development computer must meet the following requirements to run NI Vision Acquisition Software:
ProcessorPentium 4 1 GHz or equivalent
Memory512 MB RAM
Display1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended
Free Hard Disk SpaceNI Vision Acquisition Software3.5 GB
NI-IMAQ1.5 GB
NI-IMAQdx1.5 GB
NI-IMAQ I/O2.5 GB
Operating System
[*]Windows 10 (32- and 64-bit)
[*]Windows 8.1 (32- and 64-bit)1
[*]Windows 7 SP1 (32- and 64-bit)2
[*]Windows Embedded Standard 7 SP12
[*]Windows Server 2012 R2 (64-bit)1
[*]Windows Server 2008 R2 SP1 (64-bit)2
NoteNI Vision Acquisition Software August 2016 dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI Vision Acquisition Software August 2016 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Vision Acquisition Software August 2016 or later to an unsupported OS. Additionally, after installing NI Vision Acquisition Software August 2016 or later, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.NoteSupport for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.NI Application Software SupportThe following table lists the NI application software versions, including service packs, supported by the NI Vision Acquisition Software. The installer specifically allows side-by-side installations of NI Vision Acquisition Software for each of the supported versions of LabVIEW, enabling you to use the NI Vision Acquisition Software with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Vision Acquisition Software.
NI Application SoftwareVersions Supported by NI Vision Acquisition Software
NI LabVIEW2014, 2015, 2016, 2017
NI LabVIEW Real-Time Module2014, 2015, 2016, 2017
NI LabVIEW FPGA Module2014, 2015, 2016, 2017
NI LabWindows™/CVI™2012, 2013, 2015, 2017
NI Vision Development Module7.1 or later
NI Vision Builder for Automated Inspection2.5 or later
NI Vision Acquisition Software .NET SupportNI Vision Acquisition Software February 2014 was the last version to release updated support for the .NET Framework 2.0, .NET Framework 3.5, and .NET language integration into Visual Studio 2005 and Visual Studio 2008. Visual Studio 2010 and later are not supported.New versions of NI Vision Acquisition Software will not provide new .NET feature support or development. It is recommended that you begin new development in other supported development environments.New FeaturesThis release of NI Vision Acquisition Software includes the following new features.NI-IMAQ 17.0
[*]Support for LabVIEW 2017 (32- and 64-bit)
NI-IMAQdx 17.0
[*]Support for LabVIEW 2017 (32- and 64-bit)—see the Known Issues section
NI-IMAQ I/O 17.0
[*]Support for LabVIEW 2017 (32- and 64-bit)—see the Known Issues section
Updates and ImprovementsRefer to the National Instruments Website for an up-to-date list of all bug fixes in this release.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI Vision Acquisition Software.The following list contains potential high severity issues that you may want to review before using this product. Refer to the previous link to determine if any known issues have been resolved in a subsequent update.
[*]For Linux Real-Time NI CVS-1458RT, NI CVS-1459RT, and ISC-178x targets, LabVIEW 2017 support and Recommended Software Set support are not currently available in this release due to a software incompatibility. Target discovery in MAX or LabVIEW will continue to work, and previous driver releases' Recommended Software Sets are still deployable to these targets and appropriate for use. Until this issue is resolved, custom software installation through MAX is not recommended once Vision Acquisition Software May 2017 has been installed on your host system. For more information, visit ni.com/info and enter the Info Code RTConsole2017.
[*]Installing or reinstalling certain drivers, including NI-IMAQdx or Vision RIO support, on top of previous installations on a Linux Real-Time target can put the target in an unreachable state unless you force it into safe mode using the reset button or manually reassociate driver dependencies on the target. To avoid this issue, format the target prior to installing or reinstalling software, or only perform reinstallations using a Recommended Software Set. To learn more about this issue and additional recovery options, visit ni.com/info and enter the Info Code nikalEmbeddedReinstall.
[*]Windows 10 systems with Secure Boot enabled cannot load the default installed USB3 Vision drivers. Refer to the Configuring NI-IMAQdx section of this document for more information.
Installation InstructionsComplete the following steps to install NI Vision Acquisition Software.Note: You must have administrator access to install NI Vision Acquisition Software.
[*]Insert the NI Vision Acquisition Software installation media.
[*]If you do not have autorun enabled, double-click <National Instruments>\NI-IMAQdx\Staging\NI USB3 Vision Legacy.
[*]Click OK.
[*]The single driver choice shown at this time is the legacy driver. Choose NI-IMAQdx USB3 Vision Device.
If more than one driver is listed as NI-IMAQdx USB3 Vision Device, choose NI-IMAQdx USB3 Vision Device Version: 16.0.0.49152.
Click Next.Click Close.
Installing the High Performance GigE Vision DriverIf you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps.
[*]Install the NIC.
[*]Right-click the NIC in the Device Manager, and select Update Driver.
[*]Choose Browse my computer for driver software.
[*]Browse to the driver location. The newest driver version is installed to <National Instruments>\MAX\Help.
NI Vision Acquisition Software Documentation for LabVIEW
[*]You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.
[*]NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to <LabVIEW> is the location LabVIEW is installed.
NI Vision Acquisition Software Documentation for LabWindows/CVI
[*]NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.
[*]NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.
[*]Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>\CVI\Bin.
[*]Example programs are installed to
[*]version\samples
NI Vision Acquisition Software for Eclipse and other Text-based Development Environments
[*]Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <Users>\Public\Public Documents\National Instruments.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.Legal InformationCopyright© 2017 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.375130F-01 已买，好用，期待下次再来
页:
[1]