NI Vision Builder for Automated Inspection 2018 Win32/64Eng 自动检测视觉生成器VBAI2018 LabVIEW2018版适用
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Builder for Automated Inspection 2018 Win32/64Eng 自动检测视觉生成器VBAI2018 LabVIEW2018版适用
NI出品的图像处理标准软件，VBAI2018版本。VBAI经过VBAI2016、VBAI2016SP1、VBAI2017、VBAI2017SP1四代断更后，终于发布全新的VBAI2018了。难道江湖上传说的放弃VBAI，又被重新拾起来了？
2018年6月发布版本。本版本最直接更新是API函数接口增加对LabVIEW2018的支持。添加一个映射缺陷功能。其它实用性功能相对较小。
文件大小: 1876.73 MB校验和 (MD5): cb2ca8f6ec032157033979d2ee37efb8语言: 英文产品线: 视觉软件版本: 2018发布日期: 06-27-2018软件类型: 应用软件适用操作系统: Windows 10; Windows 8.1; Windows 7 (SP1) 32-bit; Windows 7 (SP1) 64-bit; Windows Embedded Standard 7 (SP1); Windows Server 2012 R2 64-bit; Windows Server 2008 R2 (SP1) 64-bit（不支持WIN XP、WIN VISTA以及无SP1的WIN7）
百度网盘和NI官方下载地址：请注册视觉论坛会员登录后购买附件下载查看请购买附件下载查看
VBAI支持软件：NI Vision Builder AI 2018 supports the following application software versions, including service packs.
Application SoftwareVersions Supported by NI Vision Builder AI 2018
LabVIEW2015, 2016, 2017, 20181
LabWindows™/CVI™2012, 2013, 2015, 2017
1 Required when using the NI Vision Builder AI Development Toolkit.（VBAI开发工具包，调用labVIEW编写的VI，VBAI2018需要LV2018的VI。）
新功能（貌似没什么新的亮点，就跟NI VISION2018一样没什么亮点，没有集成VISION2018中的深度学习，行业亮点木有）：The following list describes the new features in Vision Builder AI 2018:
[*]Map Defects Step映射缺陷步骤（该功能在视觉助手2017中就已经集成，VBAI一直未更新2016/2017，因此没有包含此功能）
[*]This step compares areas of an image to a template and returns the differences.
[*]Validate System Testing验证系统测试
[*]Perform regression testing by defining known images that pass and fail. As the inspection is updated, verify the expected results, and debug any errors.
[*]Reconcile Resources协调资源
[*]Reconcile differences between inspection and system resources when opening an inspection. The supported resources that can be reconciled include cameras, communication devices, and Vision RIO device settings.
[*]Communication Device Simulator通信设备模拟器
[*]View and edit communication data in Simulation mode from both the Configuration mode and Inspection mode.
支持硬件Windows-Based Device SupportYou can use Vision Builder AI to configure and control the following Windows-based National Instruments devices:
[*]NI CVS-1458 and 1459 Compact Vision Systems
[*]NI IC-3120, 3121, 3171, and 3173 Industrial Controllers
[*]NI ISC-178x Smart Cameras
Remote Target SupportYou can use Vision Builder AI to remotely configure and control a supported remote target running NI Linux Real-Time. Vision Builder AI supports the following remote targets:
[*]NI CVS-1458RT and 1459RT Compact Vision Systems
[*]NI IC-3120, 3121, 3171, 3172, and 3173 Industrial Controllers
[*]NI ISC-178x Smart Cameras
To use Vision Builder AI with a remote target, you must use Vision Builder AI to configure the remote target. For more information about using Vision Builder AI to configure the remote target, refer to the documentation included with the remote target or the NI Vision Builder for Automated Inspection: Configuration Help.性能改变：The following list describes the changes and enhancements to existing features in Vision Builder AI 2018:
[*]Updated UI appearance更新UI外观
[*]Pattern Matching Step Improvements模式匹配步骤改进
[*]Geometric Matching is now included in the Pattern Matching step so this single step supports all pattern matching algorithms.
[*]Support for preset values to allow for easily configuring common pattern matching scenarios for improved ease of use.
[*]Simulation Mode Improvements仿真模式改进
[*]Acquisition steps support a simulated frame rate to more accurately simulate a real acquisition with timeouts or images behind, as well as accurate camera timestamp results when available.
[*]Support for the Read/Write Camera Attribute step adding read or write operations for any attribute available for a specific camera and caching the latest value for that attribute.
[*]Support for editing or adding communication devices in simulation mode.
[*]Data Logging Step Improvements数据记录步骤改进
[*]Support added for relative path when the inspection is saved on Windows, and the data logging path is relative to the inspection path.
[*]Support added for user-defined column headers or the option for no headers.
Note: The legacy column headers that used 4 rows is not available for new steps. Older inspections that are migrated to Vision Builder AI 2018 will still have this option as well as the new column header format options.
[*]Support added for user-selectable inspection results including a result for cycle time to better benchmark performance.
[*]Support added for user-selectable digits of precision when logging numeric double data types.
[*]Support added for appending timestamp to filename.
[*]Support added for specifying the FTP port to allow for logging to a non-default port or allowing different steps to log to different FTP ports.
[*]The TCP logging feature is no longer supported by the Data Logging step. Older inspections that were using this feature will now have the Data Logging step replaced by a TCP step configured to send the same data.
[*]Support added for simulation mode to use a different path to log to on Windows that does not affect the original step settings for a path on the remote target.
[*]Support added for the tree of measurements to scale as the window grows.
[*]Image Logging Step Improvements图像记录步骤改进
[*]Support added for relative path when the inspection is saved on Windows, and the image logging path is relative to the inspection path.
[*]Support added for AVIs to be saved on real-time targets.
[*]Support added for the color palette to be saved with the image. The image is still saved as an 8-bit or 16-bit image, but the color palette affects how viewers display the image.
[*]Support added for using any Boolean result to determine whether image logging should occur. Previously, only the inspection status could be used.
[*]Support added for specifying the FTP port to allow for logging to a non-default port or allowing different steps to log to different FTP ports.
[*]Support added for simulation mode to use a different path to log to on Windows that doesn't affect the original step settings for a path on the target.
[*]Read Image from File Step Improvements (Formerly called Simulate Acquisition step)从文件读图步骤改进
[*]Support added for relative path when the inspection is saved on Windows, and the image logging path is relative to the inspection path.
[*]Support added to return AVI frame rate as a result of the step when reading images from an AVI.
[*]Measure Intensity Step Improvements测量强度步骤改进
[*]Support added for returning the minimum and maximum pixel intensity at a user-specified percentile.
[*]Calculator Step Improvements计算步骤改进
[*]Support added for renaming indicators without having to go to the Edit Input/Output dialog.
[*]Support added for a tree of inputs and outputs to make viewing all the data in arrays easier.
[*]Sauvola Local Threshold Algorithm Support/Sauvola本地阈值算法支持
[*]The Calibration Training Interface and the following steps now support this new local threshold algorithm: Classification, Count Pixels, Detect Object, and Threshold.
[*]OPC UA Support on 64-bit WindowsOPC UA支持64位操作系统
[*]Save Image Dialog Improvements保存图像对话框改进
[*]Support added for using the native Windows browse dialog to support common file operations, such as creating folders, navigating to common locations, and accessing network drives.
[*]Support added for saving the color palette with the image.
[*]Ease of Use Improvements易用性改进
[*]Support added for using the mouse wheel to zoom into and out of images, scroll through step palettes, or the scroll through a state's list of steps.
[*]Support added for viewing the default inspection interface from Configuration mode.
[*]Support added for a new Run Fast mode to achieve close to Inspection mode performance from the Configuration mode.
[*]Support added for the Overlay step to use the last color and font settings by default when adding new overlays.
更多内容，请查看以下VBAI2018自述文件：
NI Vision Builder for Automated Inspection 2018 ReadmeJune 2018This file contains important information about NI Vision Builder for Automated Inspection (Vision Builder AI), including installation instructions, new features, and known issues.OverviewSystem RequirementsApplication Software SupportInstallation InstructionsProduct Security and Critical UpdatesNew FeaturesSupported HardwareBehavior ChangesKnown IssuesBug FixesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsSoftware Requirements for Migrating an Inspection to LabVIEWUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1PC-Based Image Acquisition and I/O SupportAdditional ResourcesLegal InformationOverviewNI Vision Builder AI gives you an easy way to configure, benchmark, and deploy a system that addresses vision applications from pattern matching to code reading and presence detection to precision alignment and classification.For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Builder AI.System RequirementsNI Vision Builder AI 2018 has the following requirements:
MinimumRecommended
ProcessorPentium 4/M or equivalentCore Duo or equivalent
Memory512 MB RAM1 GB RAM
Display1,024 × 768 resolution video adapter with a 24- or 32-bit display1,280 × 1,024 resolution video adapter with a 24- or 32-bit display
Operating System
[*]Windows 10 (32- and 64-bit)
[*]Windows 10 IoT Enterprise (64-bit)3
[*]Windows 8.1 (32- and 64-bit)1
[*]Windows 7 SP1 (32- and 64-bit)2
[*]Windows Embedded Standard 7 SP12,3
[*]Windows Server 2012 R2 (64-bit)1
[*]Windows Server 2008 R2 SP1 (64-bit)2
BrowserMicrosoft Internet Explorer 6.0 or later
Hard Disk Space1.5 GB4 GB
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.NoteNI Vision Builder AI 2015 f2 dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI Vision Builder AI 2015 f2 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Vision Builder AI 2015 f2 or later to an unsupported OS. Additionally, after installing NI Vision Builder AI 2015 f2 or later, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.NoteSupport for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.3Only supported as pre-installed on NI hardware.Application Software SupportNI Vision Builder AI 2018 supports the following application software versions, including service packs.
Application SoftwareVersions Supported by NI Vision Builder AI 2018
LabVIEW2015, 2016, 2017, 20181
LabWindows™/CVI™2012, 2013, 2015, 2017
1 Required when using the NI Vision Builder AI Development Toolkit.Installation InstructionsInstalling Vision Builder AIComplete the following steps to install Vision Builder AI:Note: You must be logged in with administrator privileges to install Vision Builder AI.
[*]Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.
[*]Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.
[*]Vision Builder AI prompts you to enter your user information. Select one of the following options:
[*]Install this product using the following serial number
[*]Install this product for evaluation
If you choose to enter a serial number, enter the serial number found on your Certificate of Ownership card. Vision Builder AI automatically uses this serial number when you run the NI Activation Wizard.[*]Continue to follow the instructions on the screen.
Activating Vision Builder AIIf you do not activate a valid license, Vision Builder AI runs in evaluation mode and continues to prompt you to activate a license on each launch. At the end of the evaluation period you must activate a Vision Builder AI license to continue using the product.Note: While Vision Builder AI is in Evaluation mode, all features are available except Migrate Inspection to LabVIEW.Complete the following steps to activate the Vision Builder AI license:
[*]Launch Vision Builder AI.
[*]Click Yes when prompted to activate Vision Builder AI.
[*]Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
[*]Continue to follow the instructions on the screen. Login or register your NI account with the NI Licensing Wizard and enter your serial number when prompted.
Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.New FeaturesThe following list describes the new features in Vision Builder AI 2018:
[*]Map Defects Step
[*]This step compares areas of an image to a template and returns the differences.
[*]Validate System Testing
[*]Perform regression testing by defining known images that pass and fail. As the inspection is updated, verify the expected results, and debug any errors.
[*]Reconcile Resources
[*]Reconcile differences between inspection and system resources when opening an inspection. The supported resources that can be reconciled include cameras, communication devices, and Vision RIO device settings.
[*]Communication Device Simulator
[*]View and edit communication data in Simulation mode from both the Configuration mode and Inspection mode.
Supported HardwareWindows-Based Device SupportYou can use Vision Builder AI to configure and control the following Windows-based National Instruments devices:
[*]NI CVS-1458 and 1459 Compact Vision Systems
[*]NI IC-3120, 3121, 3171, and 3173 Industrial Controllers
[*]NI ISC-178x Smart Cameras
Remote Target SupportYou can use Vision Builder AI to remotely configure and control a supported remote target running NI Linux Real-Time. Vision Builder AI supports the following remote targets:
[*]NI CVS-1458RT and 1459RT Compact Vision Systems
[*]NI IC-3120, 3121, 3171, 3172, and 3173 Industrial Controllers
[*]NI ISC-178x Smart Cameras
To use Vision Builder AI with a remote target, you must use Vision Builder AI to configure the remote target. For more information about using Vision Builder AI to configure the remote target, refer to the documentation included with the remote target or the NI Vision Builder for Automated Inspection: Configuration Help.Note: National Instruments recommends using WebDAV to transfer files to and from a real-time target. For more information on using WebDAV to transfer files to and from a remote target, go to ni.com/info and enter the Info Code WebDAVTransfer.The following table illustrates when a remote target requires you to install driver software on the development computer.
Remote Target or Camera
Connected to a Remote TargetRequires Driver Software Installed
on Development Computer
NI Smart CameraNo
IEEE 1394No
GigE VisionNo
The following table illustrates which USB NI CompactDAQ chassis are supported by remote Vision Builder AI targets.
Remote TargetSupported USB NI CompactDAQ chassis
NI ISC-178x Smart Camera
[*]NI cDAQ-9171
[*]NI cDAQ-9174
[*]NI cDAQ-9178
NI CVS-1458 and NI CVS-1459 Compact Vision System
NI IC-312x Industrial Controller
NI IC-317x Industrial Controller
Behavior ChangesThe following list describes the changes and enhancements to existing features in Vision Builder AI 2018:
[*]Updated UI appearance
[*]Pattern Matching Step Improvements
[*]Geometric Matching is now included in the Pattern Matching step so this single step supports all pattern matching algorithms.
[*]Support for preset values to allow for easily configuring common pattern matching scenarios for improved ease of use.
[*]Simulation Mode Improvements
[*]Acquisition steps support a simulated frame rate to more accurately simulate a real acquisition with timeouts or images behind, as well as accurate camera timestamp results when available.
[*]Support for the Read/Write Camera Attribute step adding read or write operations for any attribute available for a specific camera and caching the latest value for that attribute.
[*]Support for editing or adding communication devices in simulation mode.
[*]Data Logging Step Improvements
[*]Support added for relative path when the inspection is saved on Windows, and the data logging path is relative to the inspection path.
[*]Support added for user-defined column headers or the option for no headers.
Note: The legacy column headers that used 4 rows is not available for new steps. Older inspections that are migrated to Vision Builder AI 2018 will still have this option as well as the new column header format options.
[*]Support added for user-selectable inspection results including a result for cycle time to better benchmark performance.
[*]Support added for user-selectable digits of precision when logging numeric double data types.
[*]Support added for appending timestamp to filename.
[*]Support added for specifying the FTP port to allow for logging to a non-default port or allowing different steps to log to different FTP ports.
[*]The TCP logging feature is no longer supported by the Data Logging step. Older inspections that were using this feature will now have the Data Logging step replaced by a TCP step configured to send the same data.
[*]Support added for simulation mode to use a different path to log to on Windows that does not affect the original step settings for a path on the remote target.
[*]Support added for the tree of measurements to scale as the window grows.
[*]Image Logging Step Improvements
[*]Support added for relative path when the inspection is saved on Windows, and the image logging path is relative to the inspection path.
[*]Support added for AVIs to be saved on real-time targets.
[*]Support added for the color palette to be saved with the image. The image is still saved as an 8-bit or 16-bit image, but the color palette affects how viewers display the image.
[*]Support added for using any Boolean result to determine whether image logging should occur. Previously, only the inspection status could be used.
[*]Support added for specifying the FTP port to allow for logging to a non-default port or allowing different steps to log to different FTP ports.
[*]Support added for simulation mode to use a different path to log to on Windows that doesn't affect the original step settings for a path on the target.
[*]Read Image from File Step Improvements (Formerly called Simulate Acquisition step)
[*]Support added for relative path when the inspection is saved on Windows, and the image logging path is relative to the inspection path.
[*]Support added to return AVI frame rate as a result of the step when reading images from an AVI.
[*]Measure Intensity Step Improvements
[*]Support added for returning the minimum and maximum pixel intensity at a user-specified percentile.
[*]Calculator Step Improvements
[*]Support added for renaming indicators without having to go to the Edit Input/Output dialog.
[*]Support added for a tree of inputs and outputs to make viewing all the data in arrays easier.
[*]Sauvola Local Threshold Algorithm Support
[*]The Calibration Training Interface and the following steps now support this new local threshold algorithm: Classification, Count Pixels, Detect Object, and Threshold.
[*]OPC UA Support on 64-bit Windows
[*]Save Image Dialog Improvements
[*]Support added for using the native Windows browse dialog to support common file operations, such as creating folders, navigating to common locations, and accessing network drives.
[*]Support added for saving the color palette with the image.
[*]Ease of Use Improvements
[*]Support added for using the mouse wheel to zoom into and out of images, scroll through step palettes, or the scroll through a state's list of steps.
[*]Support added for viewing the default inspection interface from Configuration mode.
[*]Support added for a new Run Fast mode to achieve close to Inspection mode performance from the Configuration mode.
[*]Support added for the Overlay step to use the last color and font settings by default when adding new overlays.
Known IssuesYou can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI Vision Builder AI 2018.Bug FixesRefer to the NI website for an up-to-date list of all bug fixes in this release.Accessing the HelpSee Additional Resources.Finding ExamplesSee Additional Resources.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.
Software Requirements for Migrating an Inspection to LabVIEWTo migrate an inspection to LabVIEW, Vision Builder AI 2018 requires LabVIEW 2018 or later and NI Vision Development Module 2018 or later.Some Vision Builder AI steps require additional software to successfully migrate an inspection to LabVIEW.
[*]OPC UA requires the LabVIEW OPC UA Toolkit.
[*]Ethernet/IP or Ethernet/IP adapter require NI-Industrial Communications for Ethernet/IP.
Refer to the following table for software requirements to migrate specific steps. Driver versions must support the target version of LabVIEW for migration.
Step NameRequirement
Acquire ImageNI-IMAQ
Acquire Image (IEEE 1394, GigE, or USB)NI-IMAQdx
Acquire Image (Smart Camera)NI-IMAQdx
Generate PulseNI-IMAQ
Generate Pulse (Vision RIO)NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems
NI Industrial Controller Device Drivers for industrial controllers
Read/Write I/ONI-IMAQ
Read/Write I/O (NI-DAQmx)NI-DAQmx
Read/Write I/O (Vision RIO)NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems
NI Industrial Controller Device Drivers for industrial controllers
Note:NI-IMAQ, NI-IMAQdx, and NI-IMAQ I/O are available on the NI Vision Acquisition Software DVD included with Vision Builder AI. The NI Industrial Controller Device Drivers DVD is provided separately with industrial controller devices. To download NI-DAQmx, visit ni.com/downloads/products/.Software Requirements for the Run LabVIEW VI StepThe Run LabVIEW VI step in Vision Builder AI 2018 supports VIs saved in LabVIEW 2018 or earlier.Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.PC-Based Image Acquisition and I/O SupportVision Builder AI supports the following types of image acquisition and I/O devices:
[*]National Instruments image acquisition devices
[*]IEEE 1394 industrial digital cameras
[*]GigE Vision cameras
[*]DirectShow-compatible USB cameras
[*]IP cameras
[*]Digital or analog I/O from NI data acquisition (DAQ) devices
[*]Serial devices
Note: You must install driver software to acquire images from an image acquisition device connected to the development computer.National Instruments Image Acquisition DevicesThis version of Vision Builder AI supports National Instruments image acquisition devices that require NI-IMAQ driver version 4.6.4 or later. Specific devices may require later versions.Note: If you are using an image acquisition device, you must install NI Vision Acquisition Software before you install the image acquisition device. NI Vision Acquisition Software gives you access to Measurement & Automation Explorer (MAX), which is software you can use to configure National Instruments devices.IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB Cameras, and IP CamerasThis version of Vision Builder AI supports IEEE 1394 cameras, GigE Vision cameras, USB3 Vision, DirectShow-compatible USB cameras, certain IP cameras, and requires NI-IMAQdx driver version 3.3 or later. Specific devices may require later versions.To acquire an image from one of these camera types when the camera is connected to the host computer, use the Acquire Image (1394, GigE, or USB) step. The Acquire Image (1394, GigE, or USB) step requires NI-IMAQdx, which can be installed from the NI Vision Acquisition Software DVD included with Vision Builder AI.You must configure an IEEE 1394 camera to use the NI-IMAQdx driver. Complete the following steps to use MAX to configure an IEEE 1394 camera to use the NI-IMAQdx driver.
[*]Launch MAX.
[*]In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.
[*]Expand NI-IMAQdx Devices to obtain a list of available cameras.
[*]Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.
NI Analog and Digital I/O DevicesThis version of Vision Builder AI supports digital and analog I/O from any National Instruments data acquisition (DAQ) device using NI-DAQmx Global Virtual Channels. To support NI DAQ devices, Vision Builder AI requires NI-DAQmx 8.0 or later.Serial CommunicationTo support serial communication, Vision Builder AI requires NI-VISA 2.6.0 or later, which is included with Vision Builder AI. You can use the serial ports built into the PC or one of the following NI serial interfaces: NI PCI-232/x, NI PXI-8420/x, or NI PXI-8422/x. You do not need to install NI-VISA on the PC to use the serial port on a remote target.Deployment Policy for Vision Builder AIPursuant to the National Instruments Software License Agreement, Vision Builder AI software is licensed to run on only one machine. Deployed applications that use Vision Builder AI require that Vision Builder AI be installed and licensed on each host machine. Therefore, you must purchase a separate Vision Builder AI license for each host machine. For more information, refer to the enclosed National Instruments Software License Agreement or visit ni.com/legal/license.Licensing OptionsFor information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Vision Builder AI offers the following licensing options:
[*]Vision Builder AI Full-Featured (778649-35)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.
[*]Vision Builder AI Full-Featured for NI Real-Time Targets—Allows full access to all Vision Builder AI features on supported real-time targets, which can be used to configure, benchmark, and deploy inspections. This license is only included with certain hardware targets and does not include the Vision Builder AI Development Toolkit.
[*]Vision Builder AI Runtime (779799-35)—Allows you to deploy existing inspections to a Windows-based host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.
[*]Vision Builder AI Development Toolkit (779343-35)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.
Windows FirewallIf you are using the Windows Firewall and launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Select Allow access so that Vision Builder AI can communicate with your remote target.Additional ResourcesHow do I get started?Read the NI Vision Builder for Automated Inspection Tutorial, which provides exercises for learning how to perform basic machine vision techniques using Vision Builder AI.Where can I find reference information?Reference information for Vision Builder AI can be accessed through the following methods:
[*]From within Vision Builder AI by clicking the Show Context Help button.
[*]Select Start»All Programs»National Instruments»Vision Builder AI 2018»Vision Builder AI 2018 Documentation on your PC.
The following documents are provided with Vision Builder AI as online help:
[*]NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.
[*]NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.
[*]NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.
Use the Search tab in the help files to quickly locate specific information. For information about how to use the search functionality, refer to the Using Help»Searching Help topic in the help file.The following documents are provides with Vision Builder AI as Adobe PDF documents:
[*]Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.
[*]NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.
Where can I find examples?Access examples of common Vision Builder AI inspections by selecting Start»All Programs»National Instruments»Vision Builder AI 2018»Vision Builder AI 2018 Examples on your PC.Where else can I go for Vision Builder AI information?Visit ni.com/vision and the NI Developer Zone at ni.com/zone for the most up-to-date information about Vision Builder AI.Legal InformationCopyright©2002-2018 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.375131D-01
百度网盘里面下载安装了，一直能用吗？ 本来用的2016，无奈程序被迫升级，只能重新下2018了
页:
[1]