NI LabVIEW 2010 Digital Filter Design Toolkit Win32Eng LV2010DFDT数字滤波器设计工具包32位版
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI LabVIEW 2010 Digital Filter Design Toolkit Win32Eng LV2010DFDT数字滤波器设计工具包32位版
数字滤波器工具包Digital Filter Design Toolkit，在LabVIEW安装时是不包含的，需要再单独下载安装。DFDT工具包在DFDT2017及以前的版本中，只有X86系统下的32位版本，从DFDT2018以后才有X64系统下的64位版本。如果需要使用64位的版本，请将LabVIEW环境升级到2018以后。
百度网盘下载链接：
请注册视觉论坛会员登录后购买附件下载查看
LabVIEW 2010 Digital Filter Design Toolkit ReadmeVersion 10.0.0June 2010This file contains information to introduce you to the LabVIEW Digital Filter Design Toolkit. This file also provides you with help resources you can use while working with the toolkit. The file contains the following information that you need to understand.OverviewNew Features and ChangesSystem RequirementsInstallation InstructionsAccessing the HelpFinding ExamplesKnown IssuesBug FixesOverviewThe LabVIEW 2010 Digital Filter Design Toolkit is the upgrade version of the LabVIEW 2009 Digital Filter Design Toolkit. The Digital Filter Design Toolkit provides a collection of digital filter design tools to supplement the LabVIEW Full Development System. The Digital Filter Design Toolkit helps you design digital filters and filter banks without requiring you to have advanced knowledge of digital signal processing or digital filtering techniques. With the Digital Filter Design Toolkit, you can design and analyze floating-point and fixed-point digital filters and filter banks. You also can simulate fixed-point digital filters.Without prior knowledge about programming in LabVIEW, you can use the Digital Filter Design Express VIs to interact graphically with filter specifications to design appropriate digital filters and filter banks.The Digital Filter Design Toolkit provides VIs that you can use to design a digital finite impulse response (FIR) or infinite impulse response (IIR) filter, analyze the characteristics of the digital filter, change the implementation structure of the digital filter, and process data with the digital filter. In addition to the floating-point support, the Digital Filter Design Toolkit provides a set of VIs that you can use to create a fixed-point digital filter model, analyze the characteristics of the fixed-point digital filter, simulate the performance of the fixed-point digital filter, and generate fixed-point C code, integer LabVIEW code, or LabVIEW field-programmable gate array (FPGA) code for a specific fixed-point target.The Digital Filter Design Toolkit includes VIs for floating-point multirate digital filter design. You can use the VIs to design a floating-point single-stage or multistage multirate filter, analyze the characteristics of the floating-point multirate filter, and process data with the floating-point multirate filter. In addition to the floating-point filter design, the toolkit also provides a set of VIs that you can use to create a fixed-point multirate filter, analyze the characteristics of the fixed-point multirate filter, simulate the behavior of the fixed-point multirate filter, and generate LabVIEW FPGA code from the fixed-point multirate filter for NI-RIO targets.The Digital Filter Design Toolkit includes VIs that you can use to design and analyze filter banks. You can use the VIs to design a 2-band quadrature mirror filter (QMF) or M-band cosine-modulated filter bank, analyze the characteristics of a filter bank, decompose or reconstruct signals with filter banks, retrieve filter bank parameters, and create a filter bank from a prototype filter.In addition to the graphical tools for digital filter design, the toolkit also provides Digital Filter Design MathScript RT Module functions that LabVIEW MathScript supports. These functions enable you to design filters in a text-based environment. You must install the LabVIEW MathScript RT Module to use the Digital Filter Design MathScript RT Module functions.New Features and Changes
[*]Use the LabVIEW 2010 Digital Filter Design Toolkit to design and analyze filter banks. Filter banks are arrays of bandpass filters that separate an input signal into several components, each of which carries a single frequency subband. You can perform signal processing on the separated components individually.
[*]The DFD Plot Freq Response VI can plot the frequency responses of a filter using logarithmic-spaced and frequency vector methods. Use the plot settings and frequency vector inputs to specify the number of frequency bins and the frequency range this VI plots in the frequency response.
[*]The DFD Windowed FIR Design VI can create an FIR filter using the Kaiser, Dolph-Chebyshev, and Gaussian window methods. This VI contains the window parameter input. Use the window parameter input to specify the beta parameter for a Kaiser window, the standard deviation for a Gaussian window, and the ratio of the mainlobe to the sidelobe for a Dolph-Chebyshev window.
[*]The File I/O VIs are now on the File I/O palette. You can use the File I/O VIs to save/retrieve a filter bank to/from a file or text file.
[*]You can use the More Options and Throughput Configuration dialog boxes to specify additional settings for the LabVIEW FPGA code you generate for single-rate, multirate, and multistage multirate FIR filters.
System RequirementsThe computer you are using must meet the following minimum system requirements to run the Digital Filter Design Toolkit:
[*]120 MB free disk space
[*]LabVIEW 2010 Full or Professional Development System
Note: If you want to use the LabVIEW 2010 Digital Filter Design Toolkit to generate LabVIEW FPGA code for a fixed-point digital filter, you must install the LabVIEW 2010 FPGA Module and NI-RIO software on the host computer. Ensure that you install the FPGA Module and NI-RIO software before you install the Digital Filter Design Toolkit. If you already installed the Digital Filter Design Toolkit, uninstall the Digital Filter Design Toolkit before installing the FPGA Module and NI-RIO software.You can run the Digital Filter Design Toolkit on the following operating systems:
[*]Windows 7 (32-bit and 64-bit)
[*]Windows Vista (32-bit and 64-bit)
[*]Windows XP (32-bit)
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
Note: The Digital Filter Design Toolkit does not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions.Installation InstructionsYou can install all of your LabVIEW products—including the Digital Filter Design Toolkit—using the LabVIEW 2010 Platform DVDs. You can find installation instructions for the Digital Filter Design Toolkit along with activation instructions in the following locations:
[*]LabVIEW Release Notes, which are available in your LabVIEW software kit.
[*]LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2010 Platform DVDs, refer to the National Instruments Web site.Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from the pull-down menu in LabVIEW, for information about using the Digital Filter Design Toolkit. On the Contents tab of the LabVIEW Help, choose Toolkits»Digital Filter Design Toolkit. This book contains:
[*]Concepts—An overview of how to use the Digital Filter Design Toolkit.
[*]How-To—A step-by-step tutorial on designing floating-point and fixed-point filters using the Digital Filter Design Toolkit.
[*]VIs—Detailed information about the Digital Filter Design VIs.
[*]MathScript RT Module Functions—Detailed information about the Digital Filter Design MathScript RT Module classes of functions and commands that LabVIEW MathScript supports.
Finding ExamplesLabVIEW examples for the Digital Filter Design Toolkit are located in the labview\examples\Digital Filter Design folder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.You also can find example VIs using the NI Example Finder. Select Help»Find Examples to launch the NI Example Finder. You also can click the arrow on the Open button on the LabVIEW dialog box and select Examples from the shortcut menu to launch the NI Example Finder.Use the Browse or Search page of the NI Example Finder to find an example VI. In the Browse page, the Digital Filter Design Toolkit examples are located in the Toolkits and Modules»Digital Filter Design folder.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Digital Filter Design Toolkit.Bug FixesThe following items are the IDs and titles of a subset of issues fixed in the LabVIEW 2010 Digital Filter Design Toolkit. If you have a bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the Digital Filter Design Toolkit.
Bug IDFixed Issue
169485Error Code descriptions are incorrect for Errors -24092 and -24067
187511In the DFD Plot MRate Freq Response VI, the range of the x-axis on the phase response graph does not change
195177If the data type of the input signal is FXP and the input filter is scaled, the DFD FXP Simulation VI returns an incorrect filtered signal
199657DFD FXP MRate Simulation VI result is incorrect for a CIC filter when the output word length is 1 and rounding mode is Nearest
Important InformationCopyright© 2010 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.TrademarksLabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]