NI Vision Development Module 7.1.1 Win32Eng 视觉开发模块VDM7.1.1版 适用LabVIEW7.1.1
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Development Module 7.1.1 Win32Eng 视觉开发模块VDM7.1.1版 适用LabVIEW7.1.1
美国国家仪器机器视觉与图像处理库NI VISION 7.1.1版本，视觉论坛visionbbs.com珍藏版。NI不再提供老旧版本的下载服务或是SSP服务才可以下载，本论坛会收取一定的费用用于论坛日常维护。
VDM是机器视觉与图像处理专用的工具包，VDM7.1.1版本针对LabVIEW7.1.1版本。本论坛提供LabVIEW7.1.1的下载。另外还需要视觉采集软件VAS，可在本论坛搜索下载。
百度网盘下载：
链接:请购买视觉论坛附件下载查看
提取码: 请购买视觉论坛附件下载查看
压缩包需要解压密码，请关注论坛顶上微信公众号，回复“密码”获取
All rightsreserved.Vision7.1.1 Development Module
README.rtf containsthe following sections:
· General Information· New Features· Known Issues· How to Activate the IMAQ Vision7.1.1 License· Using IMAQ Vision 7.1.1 withMicrosoft Visual Studio .NET 2003
General Information
Installing this program may remove previous versions of IMAQVision for LabVIEW, IMAQ Vision for Measurement Studio, NI OCR, NI-IMAQ, andMeasurement & Automation Explorer (MAX) that are currently installed.
IMAQ Vision 7.1.1 supports LabVIEW 6.1 or later, Visual Studio 6.0or later, and LabWindows™/CVI™ 6.0 or later. The installer specifically allowsside-by-side installations of IMAQ Vision 7.1.1 for each of the supportedversions of LabVIEW, enabling you to use the Vision 7.1.1 Development Modulewith multiple versions of LabVIEW. National Instruments recommends that youinstall LabVIEW, or any other supported development environment, beforeinstalling the Vision 7.1.1 Development Module.
NOTE: The Vision 7.1.1 Development Module overwrites existingNI-IMAQ examples, IMAQ Vision examples, and IMAQ Vision VIs. Move modifiedexamples or VIs that you want to save to another directory before installingthe Vision 7.1.1 Development Module.
For installation instructions and a complete list of systemrequirements, refer to the Vision 7.1.1 Development Module Release Notes.
New Features
All submodulesof the Vision 7.1.1 Development Module have the following new features:
[*]Geometric Matching—Functions for locating regions in a grayscale image that match a model, or template, of a reference pattern. Geometric matching is specialized to locate templates that are characterized by distinct geometric or shape information.
[*]2D Barcodes—Functions for creating an application that reads Data Matrix and PDF417 2D barcodes.
[*]Particle Classification—Application for training and classifying samples in images, as well as functions for creating an application that trains and classifies samples based on their shape or a user-defined feature vector.
[*]Optical Character Recognition (OCR)—Application for training and reading characters in images, as well as functions for creating an application that analyzes an image and trains and reads characters in images.
IMAQ Visionfor LabVIEW, IMAQ Vision for LabWindows/CVI, and IMAQ Vision for Visual Basichave the following new features:
[*]Custom Data—Support for reading, writing, and removing custom data from an image. Custom image data is accessible through the key with which the data is associated.
[*]Load Image Dialog—Support for displaying a dialog box with which you can preview image files and specify a path, or paths, to images. The dialog box displays selected image files to aid in selecting the correct file.
[*]64-bit RGB—Support for 64-bit RGB images.
[*]Vision Development Module Bookshelf—Gateway to all Vision Development Module documentation installed with your software. Go to Start»Program Files»National Instruments»Vision»Documentation»Search the Vision Bookshelf to launch the bookshelf.
IMAQ Visionfor LabWindows/CVI and IMAQ Vision for Visual Basic have the followingadditions:
[*]Improved Particle Analysis—Particle analysis interface now supports calibrated measurements, which yield results up to 10 times faster than the previous method. Also, particle analysis is up to twice as fast as previous versions when computing uncalibrated measurements.
[*]AVI File Support—Support for reading and writing multiple images to Audio Video Interleaved (AVI) movie files. IMAQ Vision 7.1.1 adds the ability to read AVI files, write compressed AVI files, and read and write additional data to AVI files.
[*]Enhanced Circle and Ellipse Fitting—New circle and ellipse fitting routines that ignore outliers, providing more accurate circle and ellipse fits. You can configure the degree to which outliers are ignored.
[*]Pattern Matching Enhancements—Updated pattern matching interface that performs with improved accuracy. The new interface also allows for low-level control of the pattern matching algorithm.
[*]Overlay Enhancements—Support for merging a non-destructive overlay into an image, making the overlay part of the image content. This feature allows you to view and print the image, with its overlay information, from any third-party imaging software.
VisionAssistant 7.1.1 has the following additions:
[*]Geometric Matching—Functions for creating an application that searches for a pattern or template image with less concern about lighting variations, occlusion, or scale variation. The search relies on geometric features in the image for matching.
[*]Japanese Language Support—Vision Assistant software and documentation are now available in Japanese.
Known Issues
[*]In Geometric Matching, the default scale range is 75% to 125% (instead of the documented 50% to 200%). The default occlusion range is 0% to 25% (instead of the documented 0% to 50%).
[*]AVI functionality requires Microsoft DirectX 8.1 or later.
[*]On Windows XP with Service Pack 2 installed, IMAQ Vision 7.1.1 does not support reading AVI files located in a the Local Settings folder, or any subfolders of this folder, when the AVI file uses any of the following compression filters:
[*]Indeo® Video 5.10 Compression Filter
[*]Intel Indeo® Video R3.2
[*]Intel Indeo® Video 4.5
[*]Indeo® Video 5.10
Copying the AVI file to another folder resolvesthis problem.
[*]Viewing the online help files requires Microsoft Internet Explorer 5 or later.
[*]Using IMAQ Vision 7.1.1 with LabWindows/CVI on a machine that does not support the MMX instruction set may cause an Illegal Operation exception to occur within the LabWindows/CVI environment. This error occurs when DirectX checks for the availability of the MMX instruction set on the machine.
[*]If you create a LabVIEW Shared Library (DLL) that uses any IMAQ Vision VIs, the DLL can be used only with the version of LabVIEW in which it was created.
[*]The Visual Basic .NET examples may display the UI controls with incorrect size and location settings if you use a computer with a DPI display setting other than 96 DPI. 96 DPI is the default setting for most Windows operating systems.
[*]IMAQ Vision 7.1.1 does not support the use of Image Display control invoke nodes when using LabVIEW 7.0 Real-Time. The following examples use Image Display control invoke nodes. Avoid downloading these examples to a LabVIEW 7.0 Real-Time target.
o examples\Vision\2. Functions\Analysis\HistogramExample.vio examples\Vision\2. Functions\Analysis\LineProfileExample.vio examples\Vision\2. Functions\Calibration\PerspectiveCalibration Example.llbo examples\Vision\2. Functions\Caliper\ClampExample.vio examples\Vision\2. Functions\Caliper\Edge DetectionExample.llbo examples\Vision\2.Functions\Classification\Classification.vio examples\Vision\2. Functions\Color\ColorDistance.llbo examples\Vision\2. Functions\Color\ColorLearnExample.vio examples\Vision\2. Functions\Color PatternMatching\Color Pattern Matching Example.llbo examples\Vision\2. Functions\GrayscaleProcessing\MagicWand Example.vio examples\Vision\2. Functions\ImageManagement\Extract Example.vio examples\Vision\2. Functions\ImageManagement\ImageToArray Example.vi
How to Activate the IMAQ Vision 7.1.1 License
When you run a Vision 7.1.1 application for the first time, itprompts you to activate a license for the product. If you do not activate avalid license, the Vision 7.1.1 application will run in Evaluation Mode andcontinue to prompt you to activate a license on each subsequent launch.
Complete the following steps to activate the IMAQ Vision 7.1.1license through an Internet connection.
[*]Run the product you want to license.
[*]Click Yes when prompted to interactively activate your product.
[*]Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
[*]Enter the serial number for the product, and click Next.
[*]Enter your registration information, and click Next.
TIP:Enter your email address to receive a copy of your activation code for yourrecords.
Afteryou complete these steps, the product(s) you installed are activated.
Using IMAQ Vision 7.1.1 with Microsoft VisualStudio .NET 2003
IMAQ Vision 7.1.1 supports interoperability between the Vision7.1.1 ActiveX control and Microsoft Visual Studio .NET 2003. IMAQ Visioninstalls the following Interop Assemblies that allow .NET languages tocorrectly communicate with the ActiveX controls:
· NationalInstruments.AxCWIMAQControlsLib.Interop.dll - cwimaq.ocx· NationalInstruments.AxCWIMAQHelpButton.Interop.dll - CWIMAQHlpBtn.ocx· NationalInstruments.AxCWMV.Interop.dll - cwmv.ocx· NationalInstruments.AxNIOCRLib.Interop.dll - niocr.ocx
You can find these assemblies in the<Vision>\dotNET\Assemblies\Current directory. The assemblies installed byIMAQ Vision correctly wrap several methods that generate errors if you call themethods using the assemblies generated by Visual Studio .NET. For informationabout the properties, methods, and events available with these assemblies, seethe IMAQ Vision for Visual Basic Reference and the IMAQ Vision forVisual Basic User Manual.
Creating a New .NET Application using IMAQVision 7.1,1
You must first add the IMAQ Vision controls to your toolbox whencreating a new application. Complete the following steps to add the IMAQ Visioncontrols to the Microsoft Visual Studio .NET 2003 Toolbox:
[*]In Visual Studio .NET, either create a new application or open an existing one.
[*]Open a form in Design View.
[*]Select View»Toolbox.
[*]Select the category in which you want the IMAQ Vision controls to appear, such as General, Components, and so on.
[*]Select Tools»Add/Remove Toolbox Items.
[*]In the .NET Framework Components tab, select the controls you want to add to your application. Choose from CWIMAQ, CWIMAQVision, CWIMAQViewer, CWMachineVision, and CWOCR.
When the controls are in the toolbox, you can add them to yourforms by clicking the tool and drawing an area on the form. References to theIMAQ Vision Interop Assemblies are automatically added to your project.
Viewing the IMAQ Vision 7.1.1 Examples
The IMAQ Vision examples for Microsoft Visual Studio .NET 2003 areconverted from the IMAQ Vision for Visual Basic examples. The .NET examples arewritten in Visual Basic .NET and demonstrate use of the IMAQ Vision 7.1.1Interop Assemblies. The examples are located in the <Vision>\Examples\MSVB.NET directory, and the images for the examples arelocated in the <Vision>\Examples\Images directory.
Converting an Existing Microsoft Visual Basic6.0 Application
Microsoft's automatic upgrade engine often generates its ownInterop assemblies rather than referencing the official IMAQ Vision 7.1.1Interop assemblies. When this happens, your project will have two referencesfor every IMAQ Vision assembly needed. Complete the following steps tocorrectly reference the IMAQ Vision 7.1.1 Interop assemblies:
[*]In Visual Studio .NET, select Edit»Find and Replace»Replace in Files.
[*]Replace the following with NationalInstruments.CWIMAQControls:
AxCWIMAQControlsLibAxCWIMAQHelpButtonLibAxCWMVLibAxNIOCRLib
[*]Select View»Solution Explorer.
[*]Expand the Project References.
[*]Remove the following references if they are present:
AxCWIMAQControlsLibAxCWIMAQHelpButtonAxCWMVAxNIOCRLib
页:
[1]