LabVIEW 2013SP1f1 NI SoftMotion Module Win32 NI运动控制模块2013SP1f1 适用LV2013SP1
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2013SP1f1 NI SoftMotion Module Win32 NI运动控制模块2013SP1f1 适用LV2013SP1
LabVIEW 2013SP1f1 SoftMotion模块
LabVIEW SoftMotion模块可帮助您将运动控制与I/O和视觉应用程序进行集成。
LabVIEW SoftMotion模块是LabVIEW编程环境的一个附加软件。您可在LabVIEW项目中配置、测试和调整LabVIEW SoftMotion轴。您可以将这些轴绑定到各种NI和第三方硬件配置。该模块具有用于自定义运动应用设计的高级功能，包括轨迹生成和多轴功能，如齿轮和坐标空间。
百度网盘下载地址（百度限速，请耐心等待。或使用破解工具或开超级会员提速）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能失效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
LabVIEW NI SoftMotion™ Module 2013 SP1 f1 Readme
February 2014This document contains information to introduce you to the LabVIEW NI SoftMotion Module including installation information, a list of changes in this version of NI SoftMotion, and information about known issues for this version of NI SoftMotion.ContentsOverviewSystem RequirementsInstallation InstructionsLicensingNew Features and Changes Bug Fix ListGeneral InformationAccessing the HelpFinding ExamplesKnown IssuesAutomating the Installation of NI ProductsOverviewThe LabVIEW NI SoftMotion Module allows you to use the LabVIEW project to configure and test your motion axis settings, tune your servo motors, program deterministic motion profiles, create custom motion applications, and simulate your designs created in SolidWorks.Note: Refer to the NI SoftMotion Selection Guide at zone.ni.com for a description of the different NI SoftMotion Module packages available.System RequirementsYou can run the LabVIEW NI SoftMotion Module 2013 SP1 f1 Patch installer on the following operating systems:
[*]Windows 8 (32-bit and 64-bit)
[*]Windows 7 (32-bit and 64-bit)
[*]Windows Vista (32-bit and 64-bit)
[*]Windows XP Service Pack 3 (32-bit)
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
[*]Windows Server 2012 R2 (64-bit)
The LabVIEW NI SoftMotion Module runs as a 32-bit application on all operating systems.Note:Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.The LabVIEW NI SoftMotion Module does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions.To run the LabVIEW NI SoftMotion Module, National Instruments recommends that your system meet the following requirements in addition to the minimum requirements for the LabVIEW Development System for Windows:
[*]2 GB of memory if using NI SoftMotion for SolidWorks
[*]250 MB of free disk space
The NI SoftMotion Module is compatible with the following National Instruments software.
[*]LabVIEW 2013 SP1 Base, Full, or Professional Development System (32-bit)
[*]LabVIEW 2013 SP1 Real-Time Module
[*]LabVIEW 2013 SP1 FPGA Module
[*]NI-RIO Device Drivers February 2014
[*]NI-Industrial Communications for EtherCAT® 2.7 or later
NoteTo use NI SoftMotion for SolidWorks you must have SolidWorks 2009 SP2.1 or later (32-bit or 64-bit).Installation InstructionsInstalling from the LabVIEW 2013 Platform DVDsYou can install all of your LabVIEW products—including the LabVIEW 2013 SP1 NI SoftMotion Module—using the LabVIEW 2013 SP1 Platform DVDs. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.To request additional LabVIEW 2013 Platform DVDs, refer to the National Instruments Web site at ni.com.NoteIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.-->Downloading the LabVIEW NI SoftMotion Module 2013 SP1 f1 Patch from the WebComplete the following steps to download and install the LabVIEW NI SoftMotion Module 2013 SP1 f1 Patch:
[*]Download the LabVIEWNISoftMotionModule2013SP1f1.exe file from ni.com/updates, and then run it.
[*]Follow the onscreen instructions.
Note(Windows 8/7/Vista)Users may see access and security messages during installation. Accept the prompts to complete the installation.
[*]When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
LabVIEW NI SoftMotion Module Updates and NotificationsNational Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.LicensingThe LabVIEW NI SoftMotion Module relies on licensing activation. After the evaluation period for NI SoftMotion Module Premium expires, you must activate a valid NI SoftMotion Module license before you can run NI SoftMotion Module Standard or NI SoftMotion Module Premium. To activate the NI SoftMotion Module, use the serial number you received as part of your installation package.If you do not activate the NI SoftMotion Module, you will have access to NI SoftMotion Module Lite, which provides a subset of functionality offered by the LabVIEW NI SoftMotion Module for free. With NI SoftMotion Module Lite, you can perform simple single-axis point-to-point motion, create motion applications for NI C Series drive interface modules, and connect to AKD drives through EtherCAT.Refer to the Activation Instructions for National Instruments Software for more information about licensing activation.Go to ni.com/info and enter nismpkg for a description of the different available NI SoftMotion Module packages.Version 2013 SP1 f1 Features and ChangesFixed issue: Limit Switches Fail to TriggerThe LabVIEW NI SoftMotion Module 2013 SP1 f1 fixes an issue that may prevent SoftMotion from properly interpreting limit switches if the limit switch is not active for longer than the scan rate of the RT controller. For more information, visit ni.com/info and enter the Info Code: nism2013limitswitch.Support for C/C++ Development Tools for NI Linux Real-Time, Eclipse EditionThe LabVIEW NI SoftMotion Module 2013 SP1 f1 allows you to develop applications using the NI SoftMotion Module C API in an Eclipse-based integrated development environment (IDE).New AKD Axis FeaturesThe following new or improved features are added for EtherCAT AKD axes in the LabVIEW NI SoftMotion Module 2013 SP1 f1:
[*]Velocity mode
[*]Torque mode
[*]Write methods for velocity and torque setpoints (EtherCAT AKD drive only)
[*]New I/O variables in EtherCAT XML description file for AKD EtherCAT drives, including variables for writing velocity and torque setpoints. The torque feed forward variable has been removed due to the EtherCAT AKD PDO size restrictions.
Removal of Gain Tuning Panel and Slider Tuner from Axes on EtherCAT AKD DrivesThe gain tuning panel and slider tuner are no longer available to axes on EtherCAT AKD drives in LabVIEW NI SoftMotion Module 2013 SP1 f1. Instead, drives can be tuned using the Kollmorgen AKD WorkBench software.EtherCAT AKD Drive Deployment Option ChangesDuring deployment, the LabVIEW NI SoftMotion Module 2013 SP1 f1 will not overwrite drive settings by default. The axis configuration dialog features a new option on the General Settings page, preventing NI SoftMotion Module from deploying drive settings over those configured using WorkBench.LabVIEW NI SoftMotion Module 2013 SP1 f1 Bug Fix ListYou can access the complete software and documentation bug fix list online. Refer to the National Instruments Web site for an up-to-date list of bug fixes in the LabVIEW NI SoftMotion Module 2013 SP1 f1.General InformationLabVIEW Real-Time UsersTo use the updates and features included in the LabVIEW NI SoftMotion Module 2013 SP1 f1, you must install the LabVIEW NI SoftMotion Module 2013 SP1 f1 software on the LabVIEW Real-Time target system using Measurement & Automation Explorer (MAX).Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from the pull-down menu in LabVIEW, for information about NI SoftMotion Module concepts, using NI SoftMotion, step-by-step instructions using the LabVIEW NI SoftMotion Module, and reference information about NI SoftMotion VIs and functions.Finding ExamplesLabVIEW examples for the NI SoftMotion Module are located in the labview\examples\Motion folder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.LabVIEW NI SoftMotion Module 2013 SP1 f1 Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW NI SoftMotion Module 2013 SP1 f1.Back to TopAutomating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Back to TopImportant InformationCopyright© 2004–2014 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksLabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. EtherCAT® is a registered trademark of Beckhoff Automation GmbH. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]