NI-Motion 8.3 Full Win32Eng NI运动驱动程序8.3完整版 适用LabVIEW8.6~LabVIEW2011
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Motion 8.3 Full Win32Eng NI运动驱动程序8.3完整版 适用LabVIEW8.6~LabVIEW2011
NI-Motion为NI运动器件的驱动程序，开发软件为NI SoftMotion，及Motion Assistant。
NI-Motion 8.3
发布日期
11-8-2
受支持的操作系统
Windows Vista 32-bit
Windows 7 64-bit
Windows Server 2008 R2 64-bit
Windows Server 2003 R2 32-bit
Windows Vista 64-bit
Windows 7 32-bit
Windows XP 32-bit
语言
英文
校验和
(MD5)
414a3ccdb2261438d2460152c109ca86
百度网盘下载（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
NI-Motion™ 8.3 ReadmeThis document contains installation and programming considerations for using NI-Motion with NI 73xx motion controllers, a list of changes in this version of NI-Motion, and information about NI-Motion known issues.ContentsGeneral InformationInstallation and Configuration InstructionsNI-Motion 8.3 Changes and EnhancementsNI-Motion 8.3 General ConsiderationsNI-Motion 8.3 Known IssuesPrevious NI-Motion Changes and EnhancementsNotice Regarding Microsoft Silverlight Installation and RedistributionGeneral InformationNI-Motion 8.3 is the motion control software you use to communicate with all National Instruments NI 73xx motion controllers using LabVIEW, C, LabWindows™/CVI™, or Microsoft Visual Basic 6.0 development platforms. Refer to KnowledgeBase article 39DA8HMU, Does the NI-Motion Driver Support Visual Studio .NET?, at ni.com/kb for information about Visual Studio .NET 2003 and Visual Studio 2005 or later support.NI-Motion 8.3 is compatible with the following National Instruments software:
[*]LabVIEW 8.6 or later.
[*]LabVIEW 8.6 or later Real-Time Module.
[*]LabWindows/CVI 7.0 or later.
[*]NI Motion Assistant 2.3 or later graphical prototyping software.
Compatibility with Earlier Versions of NI-MotionIf you have developed motion control systems using a previous version of NI-Motion, you must recompile your code before it will work correctly with NI-Motion 8.3.In addition, any applications you build in NI-Motion 8.3 will not work correctly in earlier versions of NI-Motion. Similarly, configuration settings you build and save in Measurement & Automation Explorer (MAX) with NI-Motion 8.3 will not work with applications you build in earlier versions of NI-Motion.LabVIEW Real-Time UsersTo use NI-Motion 8.3 with a real-time target, you must update the NI-Motion driver software on the real-time target system using MAX. Driver versions on the host and target system must be the same for proper operation. Refer to the Measurement & Automation Explorer Remote Systems Help by selecting Help»Help Topics»Remote Systems in MAX for information about installing software on the remote system.Back to TopInstallation and Configuration InstructionsThe following sections include important information about installing NI-Motion 8.3, instructions for downloading and installing NI-Motion 8.3 from the Web or from the CD, and information about NI-Motion firmware.You can run the NI-Motion 8.3 installer on the following operating systems:
[*]Windows 7 (32-bit and 64-bit)
[*]Windows Vista (32-bit and 64-bit)
[*]Windows XP Service Pack 3 or later (32-bit)
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
NI-Motion runs as a 32-bit application on all operating systems.Note:
[*]NI-Motion is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
[*]Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.
NI-Motion does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions. If you are any of these operating systems, do not install NI-Motion 8.3.TipFor optimal performance, update your operating system to the latest service pack and apply all security patches.Downloading NI-Motion 8.3 from the WebComplete the following steps to install this update:
[*]Download the NIMotion830.exe file, and then run it.
[*]Follow the onscreen instructions.
Note(Windows 7 and Vista)Users may see access and security messages during installation. Accept the prompts to complete the installation.
[*]When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
[*]Download the updated firmware to your controller(s):
NoteYou must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 8.3.
[*]Launch MAX.
[*]Expand Devices and Interfaces.
[*]Select the appropriate motion controller.
[*]Click the Firmware tab.
[*]Click the Update Firmware button at the top of the window to update all the firmware files on your device.
Installing from the CDComplete the following steps to install this update:
[*]Insert the NI-Motion 8.3 installation CD in the CD-ROM drive.
[*]If you have autorun enabled, autorun.exe runs automatically. Otherwise, double-click autorun.exe.
[*]Follow the onscreen instructions.
Note(Windows Vista)Users may see access and security messages during installation. Accept the prompts to complete the installation.
[*]When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
[*]Download the updated firmware to your controller(s):
NoteYou must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 8.3.
[*]Launch MAX.
[*]Expand Devices and Interfaces.
[*]Select the appropriate motion controller.
[*]Click the Firmware tab.
[*]Click the Update Firmware button at the top of the window to update all the firmware files on your device.
Changing Firmware Files to an Earlier Version of NI-MotionFor optimal performance, ensure that the firmware on your controller matches the driver version you install. Complete the following steps to replace the firmware on your controller if you need to use an earlier version of the NI-Motion software and firmware:
[*]Launch MAX.
[*]Expand Devices and Interfaces.
[*]Select the appropriate motion controller.
[*]Click the Firmware tab.
[*]Right-click one of the firmware files in the Firmware Name column and select Download All Files to download the firmware files on the computer onto the controller.
Back to TopNI-Motion 8.3 Changes and EnhancementsLabVIEW 2011 SupportNI-Motion 8.3 is fully supported on LabVIEW 2011.Fixed Issue 295309: NI-Motion VB and C API Performance IssuesNI-Motion 8.3 resolves a performance issue that was causing some NI-Motion applications written using the VB or C NI-Motion API to execute slower than expected. NI-Motion applications now execute at the correct rate.Back to TopNI-Motion 8.3 General ConsiderationsInhibit Output BehaviorThe default behavior of the inhibit output changed after NI-Motion 7.0. Previously, the inhibit output would be driven to the active state when the output was disabled. NI-Motion 7.0 and higher drives the inhibit output to the inactive state when the output is disabled. The behavior of the inhibit output when it is enabled did not change.Importing Portable Configuration FilesImporting motion controller settings from older portable configuration files may take a few minutes due to the settings upgrade process. This is expected behavior.Creating C Projects with Microsoft Visual Studio .NET 2003 and Visual Studio 2005 or laterVisual Studio .NET 2003 and Visual Studio 2005 and later do not allow C++ precompiled header files to be used with C source files. Disable precompiled headers when running NI-Motion C examples.Firmware Versions in NI-Motion 8.3The following table lists the expected firmware files that ship with NI-Motion 8.3.
Firmware
SectorVersion Number
NI 7330NI 7340NI 7350NI PCI-7390
683317.40.30037.40.30037.40.30037.40.3003
DSP7.32.30037.32.30037.32.30037.32.3003
FPGA17.00.30017.00.30017.10.30017.00.3014
FPGA27.00.30017.00.3001——
Back to TopNI-Motion 8.3 Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-Motion 8.3.Back to TopPrevious NI-Motion Changes and EnhancementsRefer to KnowledgeBase article 47CC30FL, NI-Motion Readmes, at ni.com/kb for access to previous NI-Motion readme files, starting with NI-Motion 7.0.Back to TopNotice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft SilverlightSome NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.Using Microsoft SilverlightYou may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.Redistribution of Microsoft SilverlightIf you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the <National Instruments>\_Legal Information\Microsoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the <National Instruments>\Common\MDF\EULADepot\NIReleased directory for more information.Back to TopImportant InformationCopyright© 2011 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.TrademarksCVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks. The mark LabWindows is used under a license from Microsoft Corporation. Other product and company names listed are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]