NI-Motion 17.0 Full Win32Eng NI运动控制设备驱动软件2016完整版 适用LabVIEW2014~LabVIEW2017
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Motion 17.0 Full Win32Eng NI运动控制设备驱动软件2017完整版 适用LabVIEW2014~LabVIEW2017
NI-Motion为NI运动控制设备的驱动软件Motion Control Driver Software，开发软件为NI SoftMotion，及Motion Assistant。
NI-Motion 17.0
发布日期
17-5-22
受支持的操作系统
Windows 7
Windows 10
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 64-bit
Windows 8.1
Windows 8
语言
英文
校验和
(MD5)
f4b9fa28a3ed4eabffbc5596f5863b03
百度网盘下载（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
NI-Motion™ 17.0 ReadmeMarch 2017This document contains installation and programming considerations for using NI-Motion with NI 73xx motion controllers, a list of changes in this version of NI-Motion, and information about NI-Motion known issues.ContentsGeneral InformationInstallation and Configuration InstructionsNI-Motion 17.0 Changes and EnhancementsNI-Motion 17.0 General ConsiderationsNI-Motion 17.0 Known IssuesPrevious NI-Motion Changes and EnhancementsAutomating the Installation of NI ProductsHow to Use NI Software with Microsoft Windows 8NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003General InformationNI-Motion 17.0 is the motion control software you use to communicate with all National Instruments NI 73xx motion controllers using LabVIEW, C, LabWindows™/CVI™, or Microsoft Visual Basic 6.0 development platforms. Refer to KnowledgeBase article 39DA8HMU, Does the NI-Motion Driver Support Visual Studio .NET?, at ni.com/kb for information about Visual Studio .NET 2003 and Visual Studio 2005 or later support.NI-Motion 17.0 is compatible with the following National Instruments software:
[*]LabVIEW 2014 or later.
[*]LabVIEW 2014 or later Real-Time Module.
[*]LabWindows/CVI 2010 or later.
Compatibility with Earlier Versions of NI-MotionIf you have developed motion control systems using a previous version of NI-Motion, you must recompile your code before it will work correctly with NI-Motion 17.0.In addition, any applications you build in NI-Motion 17.0 will not work correctly in earlier versions of NI-Motion. Similarly, configuration settings you build and save in Measurement & Automation Explorer (MAX) with NI-Motion 17.0 will not work with applications you build in earlier versions of NI-Motion.LabVIEW Real-Time UsersTo use NI-Motion 17.0 with a real-time target, you must update the NI-Motion driver software on the real-time target system using MAX. Driver versions on the host and target system must be the same for proper operation. Refer to the Measurement & Automation Explorer Remote Systems Help by selecting Help»Help Topics»Remote Systems in MAX for information about installing software on the remote system.Back to TopInstallation and Configuration InstructionsThe following sections include important information about installing NI-Motion 17.0, instructions for downloading and installing NI-Motion 17.0 from the Web or from the CD, and information about NI-Motion firmware.You can run the NI-Motion 17.0 installer on the following operating systems:
[*]Windows 10/8.1/8/7
[*]Windows Server 2008 R2 (64-bit)
[*]Windows Server 2012 R2 (64-bit)
NI-Motion runs as a 32-bit application on all operating systems.Note
[*]NI-Motion is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
[*]NI-Motion does not support Windows Vista/XP/2000/NT/Me/98/95, or the Windows Server non-R2 editions. If you are any of these operating systems, do not install NI-Motion 17.0.
TipFor optimal performance, update your operating system to the latest service pack and apply all security patches.Downloading NI-Motion 17.0 from the WebComplete the following steps to install this update:
[*]Download the NIMotion170.exe file, and then run it.
[*]Follow the onscreen instructions.
Note(Windows 10/8.1/8/7)Users may see access and security messages during installation. Accept the prompts to complete the installation.
[*]When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
[*]Download the updated firmware to your controller(s):
NoteYou must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 17.0.
[*]Launch MAX.
[*]Expand Devices and Interfaces.
[*]Select the appropriate motion controller.
[*]Click the Firmware tab.
[*]Click the Update Firmware button at the top of the window to update all the firmware files on your device.
Installing from the CDComplete the following steps to install this update:
[*]Insert the NI-Motion 17.0 installation CD in the CD-ROM drive.
[*]If you have autorun enabled, autorun.exe runs automatically. Otherwise, double-click autorun.exe.
[*]Follow the onscreen instructions.
Note(Windows 10/8.1/8/7)Users may see access and security messages during installation. Accept the prompts to complete the installation.
[*]When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
[*]Download the updated firmware to your controller(s):
NoteYou must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 17.0.
[*]Launch MAX.
[*]Expand Devices and Interfaces.
[*]Select the appropriate motion controller.
[*]Click the Firmware tab.
[*]Click the Update Firmware button at the top of the window to update all the firmware files on your device.
Changing Firmware Files to an Earlier Version of NI-MotionFor optimal performance, ensure that the firmware on your controller matches the driver version you install. Complete the following steps to replace the firmware on your controller if you need to use an earlier version of the NI-Motion software and firmware:
[*]Launch MAX.
[*]Expand Devices and Interfaces.
[*]Select the appropriate motion controller.
[*]Click the Firmware tab.
[*]Right-click one of the firmware files in the Firmware Name column and select Download All Files to download the firmware files on the computer onto the controller.
Back to TopNI-Motion 17.0 Changes and EnhancementsLabVIEW 2017 SupportNI-Motion 17.0 is fully supported on LabVIEW 2017.NI Motion Assistant End of LifePrevious versions of NI-Motion included the NI Motion Assistant software for graphical prototyping of motion control systems. This software has reached end of life status, and NI-Motion 17.0 does not include a release of NI Motion Assistant. The last release of NI Motion Assistant was version 2016.Back to TopNI-Motion 17.0 General ConsiderationsImporting Portable Configuration FilesImporting motion controller settings from older portable configuration files may take a few minutes due to the settings upgrade process. This is expected behavior.Creating C Projects with Microsoft Visual Studio .NET 2003 and Visual Studio 2005 or laterVisual Studio .NET 2003 and Visual Studio 2005 and later do not allow C++ precompiled header files to be used with C source files. Disable precompiled headers when running NI-Motion C examples.Firmware Versions in NI-Motion 17.0The following table lists the expected firmware files that ship with NI-Motion 17.0.
Firmware
SectorVersion Number
NI 7330NI 7340NI 7350NI PCI-7390
683317.40.30037.40.30037.40.30037.40.3003
DSP7.32.30037.32.30037.32.30037.32.3003
FPGA17.00.30017.00.30017.10.30017.00.3014
FPGA27.00.30017.00.3001——
Back to TopNI-Motion 17.0 Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-Motion 17.0.Issues That May Affect NI-MotionAn issue that may arise when running 32-bit applications in 64-bit versions of Windows could adversely affect NI-Motion. Refer to KnowledgeBase article 6EMFLQUB, Why Does National Instruments Software List Microsoft Hotfix 2588507 as a System Requirement?, at ni.com/kb for more information.Back to TopAutomating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Back to TopHow to Use NI Software with Microsoft Windows 8When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
NoteUnlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX either from the Start screen or from within NI Launcher.
Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8 DesktopStart screenRight-click application and select Pin to Start
Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.For more information about NI support for Windows 8, visit ni.com/windows8.Back to TopNI-Motion Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016NI-Motion will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-Motion that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows/CVIcvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle
Back to TopImportant InformationCopyright© 2003–2017 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.376348B-01
页:
[1]