LabVIEW 2015SP1 Real-Time Module LV2015SP1实时模块RealTime2015SP1-Eng 32位Windows英文版下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2015SP1 Real-Time Module LV2015SP1实时模块RealTime2015SP1-Eng 32位Windows英文版下载
自2011版实时模块起，NI提供了中文、日文、英语等三个语言版。本视觉论坛仅提供中文和英文版，日文版本本论坛不提供下载。
LabVIEW Real-Time模块可帮助您创建在嵌入式硬件设备上执行的可靠、独立的应用程序。
LabVIEW Real-Time模块是LabVIEW编程环境的一个附加软件，可用于创建和部署用于测试、监测和控制的实时分布式系统应用程序。您可以利用实时操作系统来确保独立系统的可靠性和精确定时。数百个事先编写好的LabVIEW库和硬件API还可以帮助您节省宝贵的开发时间以及实现确定性数据采集。
LabVIEW Real-Time模块为创建可靠独立的嵌入式系统提供了基于图形化编程方法的完整解决方案。 作为LabVIEW开发平台的附加模块，LabVIEW Real-Time模块有助开发和调试图形化应用程序，并将这些程序下载到嵌入式硬件设备（如：CompactRIO、Single-Board RIO、PXI、视觉系统，乃至第三方PC）上执行。
使用LabVIEW Real-Time模块的三大理由:
1. 将LabVIEW图形化编程扩展至独立的嵌入式系统
LabVIEW Real-Time包含了用于多线程和实时线程调度的内置结构，以帮助您高效地编写稳定、确定的代码。 您可对独立式系统进行图形化编程，使其更长时间地可靠运行。
2. 利用实时操作系统实现精确的定时和高可靠性
通用操作系统并不适用于需要严格定时的重要应用。 LabVIEW Real-Time可支持运行NI Linux Real-Time、VxWorks或Phar Lap ETS实时操作系统(RTOS)的NI嵌入式硬件。
3. 利用各类IP和实时硬件驱动
您可使用数百个预编写的LabVIEW函数库，比如PID控制和FFT，并用于独立式系统。 NI还提供了大量实时硬件驱动程序和LabVIEW API，适用于大多数NI I/O模块，以实现确定的数据采集。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
EXE版：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
ZIP版：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
下载地址1：
请注册登录视觉论坛会员，购买附件查看
下载地址2：
请注册登录视觉论坛会员，购买附件查看
LabVIEW 2015 SP1 Real-Time Module ReadmeDecember 2015This file contains important information about the Real-Time Module, including installation instructions, new features, a partial list of bugs fixed for the LabVIEW 2015 SP1 Real-Time Module, and known issues.OverviewSystem RequirementsApplication Software SupportInstallation InstructionsProduct Security and Critical UpdatesKnown IssuesBug FixesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003Legal InformationOverviewThe LabVIEW Real-Time Module is a complete solution for creating reliable, stand-alone embedded systems with a graphical programming approach. As an add-on to the LabVIEW development environment, the LabVIEW Real-Time Module helps you develop and debug graphical, deterministic real-time applications that can be downloaded to and executed on embedded hardware devices such as NI CompactRIO, NI CompactDAQ, NI Single-Board RIO, PXI, vision systems, or even third-party PCs.System Requirements
[*]LabVIEW 2015 SP1 Full or Professional Development System (32-bit)
[*]At least 200 MB of disk space in addition to the LabVIEW-recommended minimum
[*]One of the following operating systems for application development:
[*]Windows 10
[*]Windows 8.1
[*]Windows 7 Service Pack 1
[*]Windows Vista
[*]Windows XP Service Pack 3 Professional
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2015 SP1.Note:
[*]The Real-Time Module is compatible with LabVIEW (32-bit) only. Therefore, you must have LabVIEW (32-bit) installed even if you use a 64-bit OS.
[*]You might need more memory than the LabVIEW-recommended minimum depending on the size of the application you design in LabVIEW on the host computer.
[*]Support for Windows Server 2003 R2 might require disabling physical address extensions (PAE). Refer to the NI website for information about how this might affect your use of Windows Server 2003 R2 and what actions you might have to take.
[*]The Real-Time Module does not support the Windows Server non-R2 editions.
The Real-Time Module installs the following real-time operating systems (RTOSes). Refer to the specific RT target hardware documentation for information about which RTOS your target uses.
[*]NI ETS
[*]NI Linux Real-Time
[*]VxWorks
Note:Each RTOS supports only a subset of LabVIEW features. Refer to the Real-Time Module»Real-Time Operating Systems book on the Contents tab of the LabVIEW Help for a list of unsupported LabVIEW features and special considerations for each RTOS.Application Software SupportThe following table lists the application software versions, including service packs, supported by the LabVIEW 2015 SP1 Real-Time Module.
Application SoftwareVersions Supported by Product
LabVIEW2015 SP1 (32-bit only)
Installation InstructionsYou can install all of your LabVIEW products—including the Real-Time Module—using the LabVIEW 2015 SP1 Platform media. Refer to the LabVIEW Installation Guide on the LabVIEW Platform media for installation instructions and system requirements.To request additional LabVIEW Platform media, refer to the NI website.NoteIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.Installing and Using Japanese and Simplified Chinese Languages on an RT TargetAfter you install the Real-Time Module on your development computer, you can complete the following steps to install and use Japanese and Simplified Chinese languages on an RT target:
[*]Use the LabVIEW Real-Time Software Wizard in NI Measurement & Automation Explorer (NI MAX) to install the Language Support for Japanese or Language Support for Simplified Chinese software component on the RT target. Refer to the Measurement & Automation Explorer Help for information about the LabVIEW Real-Time Software Wizard.
[*]Open the System Settings tab and select Japanese or Simplified Chinese as the Locale.
Note:You cannot use Japanese or Simplified Chinese characters in directory names or filenames on the RT target.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.Known IssuesYou can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in the Real-Time Module.Bug FixesThe following items are the IDs and titles of a subset of issues fixed in the Real-Time Module. This is not an exhaustive list of issues fixed in the current version of the Real-Time Module. If you have a CAR ID, you can search this list to validate the issue has been fixed.
IDFixed Issue
537230Modifications to a VI with dynamic references break the VI with error -1055 at any Property Node.
539908The Two Button Dialog function does not wait for user input and always returns False from the T button? output.
Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Real-Time Module.Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Real-Time Module are located in the labview\examples\Real-Time Module directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.NoteNI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch NI MAX either from the Apps view or from within NI Launcher.Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.1 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.1 DesktopStart screenRight-click application and select Pin to Start
Windows 8.1 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, click the down arrow on the bottom left of the screen.For more information about NI support for Windows 8.1, visit ni.com/windows8.LabVIEW Real-Time Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016The LabVIEW Real-Time Module will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the Real-Time Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
LabVIEWlifecycle
LabWindows™/CVI™cvi_lifecycle
Measurement Studiomstudiolifecycle
TestStandtslcp
DIAdemddlcp
SignalExpressselcp
VeriStandnivslifecycle
Legal InformationCopyright© 1999–2015 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.374714D-01
页:
[1]