LabVIEW 2010 Sound and Vibration Analysis LabVIEW声音和振动工具包NISV2010/SVMS2010
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2010 Sound and Vibration Analysis LabVIEW声音和振动工具包NISV2010/SVMS2010
LabVIEW声音和振动工具包提供了音频测试、声学测量和振动测量应用所需的函数和显示控件。
LabVIEW声音和振动工具包是一个软件附加组件，包含易于使用的功率谱、正弦扫频和倍频程分析VI。它还可进行音频和失真测量、频率分析、频率响应测量和瞬态分析。该工具包还对分析解决方案进行了更新，以符合不断发展的IEC标准。LabVIEW声音和振动工具包提供了50多个可立即运行的LabVIEW示例，旨在帮助用户快速开始开发应用程序。
在2019~2021版本，使用32位、64位分开安装文件的方式，在2018及之前的版本,2023Q3及之后版本则使用同一个安装文件，即同一安装文件可支持32位、64位LabVIEW，与VISION模块类似。具体的请查看下面的自述文件。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
LabVIEW 2010 Sound and Vibration Analysis VIs ReadmeVersion 10.0.0June 2010This file contains information about LabVIEW support for the NI Sound and Vibration Toolkit 2010 and the NI Sound and Vibration Measurement Suite 2010. This file also provides you with help resources you can use while working with the software. Refer to the National Instruments Web site for a comparison between the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite.This file contains the following information:New FeaturesSystem RequirementsInstallation InstructionsRedistributing Executable Sound and Vibration ApplicationsAccessing the HelpFinding ExamplesKnown IssuesBug FixesDocumentation CorrectionsNew Features: Sound and Vibration ToolkitThe Sound and Vibration Toolkit 2010 includes the following new features in LabVIEW:DAQmx AI Config XControlUse the DAQmx AI Config XControl on your application front panel to provide interactive configuration for DAQmx analog input channels. The control provides support for quick configuration and compact display of multiple analog input channels and the configuration for measurement type, sensor sensitivity, input range, coupling, IEPE, location, and orientation as well as timing and tachometer configuration.Embedded Monitoring VIsUse these advanced, performance-optimized VIs in embedded monitoring applications or other applications that require maximum throughput and minimum memory footprint.Machine Characteristic VIsUse the Machine Characteristics VIs to calculate the common frequencies of interest for critical machine elements such as bearings, pulleys, gears, AC and DC motors, and pumps and fans.UFF58 ASCII VIsUse the UFF58 ASCII VIs to write time waveforms, frequency spectra, and real and imaginary components of frequency response to UFF58 files in ASCII format. The saved functions in these ASCII files can be read by the VIs in the UFF58b subpalette, DIAdem with the UFF58 plugin, or by external software applications.Application Example for Impact TestUse this advanced example to interactively configure your hammer and accelerometer(s) channels, continuously acquire and trigger on impacts, accumulate results, perform averaged frequency response measurements, and archive frequency responses to a UFF 58 file. The example uses a button-driven graphical user interface (GUI) to navigate through the steps of completing an impact test. Use the application example as is, or customize it to fit specific application requirements. Open this example by navigating to the examples\Sound and vibration\Application Examples directory.Spectrum Extended Measurements VIsReplaced the Extended Measurements palette under the Order Analysis palette with the Spectrum Extended Measurements palette. Also added the Spectrum Extended Measurements palette to the Frequency Analysis and Embedded Monitoring palettes. Also added the following VIs to the Spectrum Extended Measurements palette: SVFA Convert Frequency (CPM to CPS), SVFA Convert Frequency (CPS to CPM), and SVFA Convert Spectrum (Frequency to Order).System RequirementsTo run the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite, your computer must meet the following minimum system requirements:
[*]Supported Operating Systems
[*]Windows 7 (32-bit and 64-bit)
[*]Windows Vista (32-bit and 64-bit)
[*]Windows XP (32-bit)
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
[*]Minimum of 1 GB of RAM
[*]Pentium 4/M or equivalent processor
[*]LabVIEW 2010 Full Development System or Professional Development System installed and properly licensed
[*]NI-DAQmx 9.1 or later installed for NI-DAQmx support
Note: The Sound and Vibration Toolkit 2010 and the Sound and Vibration Measurement Suite 2010 do not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions.Installation InstructionsYou must be logged in with administrator privileges to install the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite. Note the following consideration when installing these products:
[*]You cannot install the Sound and Vibration Toolkit 2010 on a computer that has the Order Analysis Toolkit 2.1 or earlier installed. You must purchase and install the Sound and Vibration Measurement Suite 2010 to use order analysis functionality with the Sound and Vibration Toolkit 2010.
Installing from the LabVIEW 2010 Platform DVDYou can install all of your LabVIEW products—including the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite—using the LabVIEW 2010 Platform DVDs. You can find installation instructions for the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite along with activation instructions in the following locations:
[*]LabVIEW Release Notes, which are available in your LabVIEW software kit.
[*]LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2010 Platform DVDs, refer to the National Instruments Web site.Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.Installing from the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite DVDComplete the following steps to install the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite on Windows 7/Vista/XP/Server 2008 (64-bit)/Server 2003 (32-bit):
[*]Disable any automatic virus detection programs before installation. Some virus detection programs interfere with the installation program.
[*]Insert the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite DVD and follow the instructions that appear on the screen.
[*]After installation, enable any virus detection programs you disabled and run a virus scan.
[*]Restart the computer.
[*]Activate the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite using the NI License Manager.
Redistributing Sound and Vibration ExecutablesIf you want to redistribute executables built with the Sound and Vibration Measurement Suite or any of its components, you must purchase the appropriate NI Sound and Vibration Software Run-Time License. The part number for the NI Sound and Vibration Software Run-Time License is 779875-01. Contact National Instruments to purchase the NI Sound and Vibration Software Run-Time License.Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help in LabVIEW, for information about the Sound and Vibration VIs.Finding ExamplesYou can find LabVIEW examples for the Sound and Vibration VIs in the labview\examples\Sound and Vibration directory.You also can find LabVIEW examples for the Sound and Vibration VIs using the NI Example Finder. Select Help»Find Examples to launch the NI Example Finder. On the Browse page, the Sound and Vibration example VIs are located in the Toolkits and Modules»Sound and Vibration folder.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite.Bug FixesThe following items are the IDs and titles of a subset of issues fixed between the Sound and Vibration Measurement Suite 2009 and 2010. If you have a Bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the Sound and Vibration Measurement Suite.
Bug IDFixed Issue
175627Shaft Centerline Plot xControl updates direction arrow.
176806Always returns full amplitude regardless of comparison result.
181418Added UFF58 ASCII palette to write ASCII from LabVIEW datatypes and convert from binary to ASCII.
Documentation Corrections
[*]The equations for calculating ball spin frequency/order are not correct in the Calculating Characteristic Frequencies and Orders and SVT Bearings VI topics. Use the equation on the block diagram of the SVT Bearings VI to calculate ball spin frequency/order.
Copyright© 2010 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.TrademarksLabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.PatentsFor patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or ni.com/patents.
页:
[1]