LabVIEW 2011 Sound and Vibration Analysis LabVIEW声音和振动工具包NISV2011
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2011 Sound and Vibration Analysis LabVIEW声音和振动工具包NISV2011
LabVIEW声音和振动工具包提供了音频测试、声学测量和振动测量应用所需的函数和显示控件。
LabVIEW声音和振动工具包是一个软件附加组件，包含易于使用的功率谱、正弦扫频和倍频程分析VI。它还可进行音频和失真测量、频率分析、频率响应测量和瞬态分析。该工具包还对分析解决方案进行了更新，以符合不断发展的IEC标准。LabVIEW声音和振动工具包提供了50多个可立即运行的LabVIEW示例，旨在帮助用户快速开始开发应用程序。
在2019~2021版本，使用32位、64位分开安装文件的方式，在2018及之前的版本,2023Q3及之后版本则使用同一个安装文件，即同一安装文件可支持32位、64位LabVIEW，与VISION模块类似。具体的请查看下面的自述文件。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
EXE版与ZIP版内容一样，EXE版为NI当年发行版，ZIP版为NI后期重新压制的版本。
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
ZIP版：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
EXE版：
请注册登录视觉论坛会员，购买附件查看
ZIP版：
请注册登录视觉论坛会员，购买附件查看
LabVIEW 2011 Sound and Vibration Analysis VIs ReadmeVersion 11.0.0June 2011This file contains information about LabVIEW support for the NI Sound and Vibration Toolkit 2011 and the NI Sound and Vibration Measurement Suite 2011. This file also provides you with help resources you can use while working with the software. Refer to the National Instruments Web site for a comparison between the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite.This file contains the following information:New FeaturesSystem RequirementsInstallation InstructionsRedistributing Executable Sound and Vibration ApplicationsAccessing the HelpFinding ExamplesKnown IssuesBug FixesNew Features: Sound and Vibration Measurement SuiteThe Sound and Vibration Measurement Suite includes the following new features:Support for LabVIEW 2011Support for LabVIEW 2011 does not remove previously installed support for LabVIEW 2010 and earlier.Application Example: Machine Vibration LoggerUse the new features to perform continuous acquisition, processing, and logging. This example features new views for dashboard status, trended values, and block processing. Use this example to configure:
[*]NI-DAQmx hardware
[*]Measurement analyses for level, FFT, and order tracking
[*]TDMS logging
Updates to the Application Example: Impact TestUse the new features to perform TDMS logging for time-domain impacts. This example features a delete button to manage stored impacts, context help for controls and indicators, and a resizeable view area.Updates to the DAQmx AI Config XControlUse the new features on the DAQmx AI Config XControl to configure DAQmx logging, save tasks in Measurement & Automation Explorer (MAX), and configure software triggers. The control adds the trigger configuration as waveform attributes to the reference channel. This control also features a resizeable channel table.System RequirementsTo run the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite, your computer must meet the following minimum system requirements:
[*]Supported Operating Systems
[*]Windows 7 (32-bit and 64-bit)
[*]Windows Vista (32-bit and 64-bit)
[*]Windows XP Service Pack 3 or later (32-bit)
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
[*]Minimum of 1 GB of RAM
[*]Pentium 4/M or equivalent processor
[*]LabVIEW 2011 Full Development System or Professional Development System installed and properly licensed
[*]NI-DAQmx 9.3.5 or later installed for NI-DAQmx support
Installation InstructionsYou must be logged in with administrator privileges to install the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite. Note the following consideration when installing these products:
[*]You cannot install the Sound and Vibration Toolkit 2011 on a computer that has the Order Analysis Toolkit 2.1 or earlier installed. You must purchase and install the Sound and Vibration Measurement Suite 2011 to use order analysis functionality with the Sound and Vibration Toolkit 2011.
Installing from the LabVIEW 2011 Platform DVDYou can install all of your LabVIEW products—including the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite—using the LabVIEW 2011 Platform DVDs. You can find installation and activation instructions in the LabVIEW Release Notes, which are available in your LabVIEW software kit.To request additional LabVIEW 2011 Platform DVDs, refer to the National Instruments Web site.Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.Installing from the Sound and Vibration Measurement Suite DVDComplete the following steps to install the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite:
[*]Disable any automatic virus detection programs before installation. Some virus detection programs interfere with the installation program.
[*]Insert the Sound and Vibration Measurement Suite DVD and follow the instructions that appear on the screen.
[*]After installation, enable any virus detection programs you disabled and run a virus scan.
[*]Restart the computer.
[*]Activate the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite using the NI License Manager.
Redistributing Executable Sound and Vibration ApplicationsIf you want to redistribute executables built with the Sound and Vibration Measurement Suite or any of its components, you must purchase the appropriate NI Sound and Vibration Software Run-Time License. The part number for the NI Sound and Vibration Software Run-Time License is 779875-35. Contact National Instruments to purchase the NI Sound and Vibration Software Run-Time License.Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help in LabVIEW, for information about the Sound and Vibration VIs.Finding ExamplesYou can find LabVIEW examples for the Sound and Vibration VIs using the NI Example Finder. Select Help»Find Examples to launch the NI Example Finder. On the Browse page, the Sound and Vibration example VIs are located in the Toolkits and Modules»Sound and Vibration folder.You also can find LabVIEW examples for the Sound and Vibration VIs in the labview\examples\Sound and Vibration and the labview\examples\Order Analysis directories.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite.Bug FixesYou can access a list of bug fixes online. Refer to the National Instruments Web site for a list of bug fixes in the Sound and Vibration Toolkit and Sound and Vibration Measurement Suite.Copyright© 2011 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.TrademarksLabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.PatentsFor patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or ni.com/patents.
页:
[1]