LabVIEW 2014 FPGA Compile Farm Toolkit Win32Eng LabVIEW2014FPGA集群编译工具包FPGA-CFT2014
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2014 FPGA Compile Farm Toolkit Win32Eng LabVIEW2014FPGA集群编译工具包FPGA-CFT2014
LabVIEW FPGA Compile Farm工具包可帮助您创建现场服务器，轻松管理FPGA编译。
LabVIEW FPGA Compile Farm工具包可帮助您创建现场服务器，轻松管理FPGA编译。用户可根据需要连接多台编译计算机；中央服务器软件负责管理并行编译和队列之外的集群部署(farming)。为了帮助用户缩短FPGA编译时间，该工具包还可支持Linux编译服务器计算机。
文件大小: 211026720 字节 (201.25 MB)
修改日期: 2014-07-03 00:15
MD5: b22c1356bf7205334026536e2c4489fd(官方正确)
SHA1: fda9ff7948856d7ebe86dad014cf592421c0fb67
SHA256: aaaa73d4453592506480afa323710bfa9c3c8eab6dec2b9434bc139257ed8301
CRC32: c92d2f15
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
下载地址1：
请注册登录视觉论坛会员，购买附件查看
下载地址2：
请注册登录视觉论坛会员，购买附件查看
没有CFT的自述文件，NI官方也只是提供了FPGA2014的自述文件
LabVIEW 2014 FPGA Module ReadmeVersion 14.0.0
June 2014
This file contains important information about the LabVIEW FPGA Module, including installation instructions, known issues, and a partial list of bugs fixed for LabVIEW 2014 FPGA Module.
FPGA Module System RequirementsFPGA Compile Farm Server System RequirementsInstallation InstructionsSupported FPGA Targets for FPGA IP BuilderProduct Security and Critical UpdatesKnown IssuesBug FixesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsNI LabVIEW FPGA Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016Legal InformationFPGA Module System RequirementsThe development computer is a PC or NI PXI/PXI Express system on which you install LabVIEW and the LabVIEW FPGA Module. You also can install the Xilinx compilation tools on your development computer to compile LabVIEW FPGA VIs locally. However, if the FPGA design or target requires more than 2 GB of memory, National Instruments recommends installing the Xilinx compilation tools on a separate computer. This computer is referred to as the remote compile worker.
Refer to the support document at ni.com for more information about the NI hardware supported by each Xilinx compilation tool.
Development Computer
[*]LabVIEW 2014 Full or Professional Development Systems (32-bit)
[*]1.2 GHz Pentium processor or equivalent
[*]11 GB additional disk space
[*]Memory1:
[*]At least 3 GB of RAM for Virtex-5 and earlier FPGA targets
[*]At least 4 GB of RAM for Virtex-6 and later2 FPGA targets
[*]One of the following operating systems:
[*]Windows 7 (32-bit)
[*]Windows 7 (64-bit with 32-bit LabVIEW installed)
[*]Windows Vista (32-bit)
[*]Windows Vista (64-bit with 32-bit LabVIEW installed)
[*]Windows XP Professional (Service Pack 3)
[*]Windows Server 2003 R2 (32-bit)3
[*]Windows Server 2008 R2 (64-bit with 32-bit LabVIEW installed)
[*]Windows Server 2012 R2 (64-bit with 32-bit LabVIEW installed)
Note: The LabVIEW 2014 FPGA Module does not support Windows 8 or Windows 8.1.
Note: National Instruments recommends a 64-bit OS for the computer on which you install the Xilinx Compilation Tools.[*]FPGA device
[*]Device driver software—To program most devices with the LabVIEW 2014 FPGA Module, install the NI-RIO 14.0 driver software. Refer to the hardware documentation for different requirements for a specific device.
1Memory requirements vary according to both the FPGA target and the FPGA VI you create for that target. To determine your memory needs, monitor the memory usage of the xst.exe process in the Windows Task Manager.
2You must use a 64-bit OS to address 4 GB of RAM.
3The LabVIEW FPGA Module does not support the Windows Server non-R2 editions.
FPGA Compile Farm Server System RequirementsIf you install the FPGA Compile Farm Server on a separate computer, you can configure that computer to be a remote compile server. If you install the Xilinx Compilation Tools on a separate computer, you can configure that computer to be a remote compile worker.
Refer to the Setting Up a Remote Compile Server or Compile Worker section of the LabVIEW FPGA Module Release and Upgrade Notes for information about setting up and using a local or remote compile server or compile worker. Refer to the support document at ni.com for more information about the NI hardware supported by each Xilinx compilation tool.
The remote compile server must meet the following minimum system requirements:
[*]35 MB free disk space
[*]1 GB RAM
[*]One of the following operating systems:
[*]Windows 7 (32-bit or 64-bit)
[*]Windows Vista (32-bit or 64-bit)
[*]Windows XP Professional (Service Pack 3)
[*]Web browser for accessing compile job queues via the NI Web-based Configuration & Monitoring Service FPGA Compile Farm Console
Each computer that you want to use as a compile worker must meet the following minimum system requirements:
[*]11 GB of disk space for the complete set of Xilinx compilation tools
[*]One of the following operating systems:
[*]Windows 7 (32-bit or 64-bit)
[*]Windows Vista (32-bit or 64-bit)
[*]Windows XP Professional (32-bit or 64-bit)
[*]Red Hat Enterprise Linux 6.3
Note: National Instruments recommends a 64-bit OS for the computer on which you install the Xilinx Compilation Tools.Installation InstructionsYou can install all of your LabVIEW products—including the FPGA Module, FPGA Compile Farm Server, and FPGA IP Builder—using the LabVIEW 2014 Platform media. You can find installation instructions for the FPGA Module along with activation instructions in the following locations:
[*]LabVIEW FPGA Module Release and Upgrade Notes, which are available online at ni.com/manuals as well as on the LabVIEW 2014 Platform media.
[*]LabVIEW 2014 Installation Guide, which is available in your FPGA Module software kit.
To request additional LabVIEW 2014 Platform media, refer to the National Instruments website.
Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Supported FPGA Targets for FPGA IP BuilderFPGA IP Builder supports only a subset of FPGA targets. Refer to the National Instruments website for a list of supported targets.
Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the FPGA Module.
Bug FixesThe following items are the IDs and titles of a subset of issues fixed in the LabVIEW 2014 FPGA Module. This is not an exhaustive list of issues fixed in the current version of the LabVIEW 2014 FPGA Module. If you have a CAR ID, you can search this list to validate the issue has been fixed.
IDFixed Issue
467926ERROR:Place:1136 - This design contains a global buffer instance driving a non-clock load (Not a recommended design for Spartan-6 targets).
461748579x Streaming Tx example Code Generation Errors for 5793 with 7975R.
442452Clock Selection Window doesn't allow me to choose a clock.
441704Built-in FIFOs Error in LabVIEW FPGA Co-simulation.
440269FPGA Bitfile causes filename error, throws LabVIEW into unrecoverable state.
438611Open Dynamic Bitfile Reference (ODBR) yields a bad reference but no error when inside a loop.
438368 Multiple reruns of a VI quickly cause errors and hang of sampling probe watch window.
436905"Bind FPGA host reference to type definition" overwrites ctl file without any warning.
432892Regeneration of support files for Xilinx CoreGen fails when LabVIEW version is changed.
428544FPGA Compile translation step in 2013 adds over 2 hours to compilation time from 2011.
412592Cannot run FPGA VI in interactive mode (run button doesn't do anything) if LabVIEW Default Directory has been modified.
412467Handshake Primitives won't simulate in Dynamic Dispatch VIs.
411611DSP48E Slices cec does not behave correctly in simulation.
401588Unsupported Control Type in a diagram disable structure causes internal compilation error.
393669Switching input order on FPGA Timed Loop causes compile error.
389331Spartan-6 BRAM items use more resources than necessary.
381497Simulation behavior doesn't match hardware with indicator and local Read inside SCTL.
380249Access violation crash when compiling converted 1D LUT FPGA express VI.
367915Incorrect DMA Write node behavior with implicit enable removal.
Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the LabVIEW 2014 FPGA Module.
Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following articles on ni.com:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
NI LabVIEW FPGA Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016The National Instruments LabVIEW FPGA Module will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the LabVIEW FPGA Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows™/CVI™cvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle
Legal InformationCopyright
© 2003–2014 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Third-Party Copyright Notices
The SharpZipLib_Notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:
\National Instruments\LabVIEW 2014\FPGA\Legal\
The Python_2.5_notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:
\National Instruments\LabVIEW 2014\FPGA\Legal\
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Xilinx® is a registered trademark of Xilinx, Inc. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]