LabVIEW 2009 SP1 FPGA Module Win32Eng LabVIEW2009SP1FPGA模块LVFPGA2009SP1英文版
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2009 SP1 FPGA Module Win32Eng LabVIEW2009SP1FPGA模块LVFPGA2009SP1英文版
NI LabVIEW FPGA模块可帮助您开发和调试自定义硬件逻辑，并部署到NI FPGA硬件上。
LabVIEW FPGA是LabVIEW的一个软件附件，您可以通过高度集成的开发环境、IP库、高保真模拟器和调试功能，更高效地设计基于FPGA的系统。您可以创建FPGA VI，将I/O直接访问与用户定义的LabVIEW逻辑相结合，为数字协议通信、硬件在环仿真和快速控制原型等应用定义自定义硬件。虽然LabVIEW FPGA模块包含许多内置信号处理程序，但您也可以集成现有的硬件描述语言（HDL）代码以及第三方IP。
FPGA从2018版开始，提供64位版本和32位版本。而之前的则只有32位版本。64位版本的，仅有英文版。而32位版本的，则通常会有英文版、日文版、中文版等。本论坛大部分的日文版不提供下载（有少数几个没有找到中文版的有提供日文版）。部分年代版本的，则没有中文版的资源，请使用英文版。
下载地址1（这里名称虽为LVFPGA2009，但是实际为FPGA2009SP1）/下载地址2/下载地址3:
百度网盘下载地址和NI官方下载地址：
请注册登录视觉论坛会员，购买附件查看
LabVIEW 2009 SP1 FPGA Module ReadmeVersion 9.0.1December 2009This file contains important information about the LabVIEW FPGA Module.InstallationYou can install all of your LabVIEW products—including the FPGA Module–using the LabVIEW Platform DVDs. You can find installation instructions for the FPGA Module along with activation instructions in the following locations:
[*]LabVIEW FPGA Module Release and Upgrade Notes, which are available in your FPGA Module software kit or online at ni.com/manuals.
[*]LabVIEW Release Notes, which are available in your LabVIEW software kit.
[*]LabVIEW Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW Platform DVDs, refer to the National Instruments Web site.You must install TCP. Most computers have TCP installed. If TCP is not installed, LabVIEW returns the Error Contacting Server message when it attempts to contact the LabVIEW FPGA Compile Server.You must install the current version of LabVIEW and the FPGA Module before you mass compile existing VIs. If you mass compile existing VIs before installing the current version of the FPGA Module, the following VIs might have mutation issues: Sine Wave Generator, Discrete Delay, Quantizer, Look-Up Table 1D, Analog Period Measurement, Butterworth Filter, FIFO Method Node, HDL Interface Node, Open FPGA VI Reference, Read/Write Control, Call VI, Close FPGA VI Reference, Invoke Method, Up Cast, FPGA I/O Method Node, and FPGA I/O Property Node.For Windows 7 UsersNational Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. However, NI has become aware of a number of issues of potential significance regarding Microsoft Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the Info Code windows7.The Xilinx tools used by the FPGA Module do not officially support Windows 7 32-Bit or Windows 7 64-Bit. National Instruments obtained permission from Xilinx to allow FPGA Module customers to use the tools on Windows 7 32-Bit and Windows 7 64-Bit, with the disclaimer that Xilinx will not be able to fix any bugs found that are specific to the Windows 7 32-Bit OS or Windows 7 64-Bit OS. National Instruments tested the Xilinx tools, as they are used by the FPGA Module, and did not find any issues related to Windows 7 32-Bit or Windows 7 64-Bit. If you encounter problems with the Xilinx tools specific to Windows 7 32-Bit or Windows 7 64-Bit, you might be required to compile using Windows XP, Windows Vista 32-Bit, or Windows Vista 64-Bit. National Instruments will not be liable for any problems or issues related to the use of Xilinx tools with Windows 7 32-Bit or Windows 7 64-Bit.Windows Server UsersThe FPGA Module supports the Windows Server 2003 R2 (32-bit) and Windows Server 2008 R2 (64-bit) editions. The FPGA Module does not support the Windows Server non-R2 editions.Compatibility and Upgrade Issues from FPGA Module 2009FPGA VIs containing the following objects are not backwards-compatible with LabVIEW 2009 when saved in LabVIEW 2009 SP1.
[*]FIFO name controls, constants, and indicators
[*]Memory name controls, constants, and indicators
[*]Clusters containing FIFO or Memory name controls, constants, and indicators
[*]FIFO and Memory functions
If you save an FPGA VI containing these objects in LabVIEW 2009 SP1, the VI will be broken when you open it in LabVIEW 2009. National Instruments recommends that you save a copy of FPGA VIs in LabVIEW 2009 before opening and saving the FPGA VIs in LabVIEW 2009 SP1.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the FPGA Module.Bug FixesThe following items are the IDs and titles of a subset of issues fixed in the FPGA Module 2009 SP1.
Bug IDFixed Issue
171812FPGA Look Up Table 1D hangs when calling an initialization VI.
179899FPGA references in subVIs break wires when references are changed, even when properly configured.
179651FIFO name controls read fixed-point values incorrectly.
177579Internal overflow possible for Butterworth highpass configurations.
177016FPGA Compile Status window reports incorrect device utilization (total slices and LUTs) for Spartan-3 targets
Copyright© 2003–2009 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.Xilinx® is a registered trademark of Xilinx, Inc.Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]