NI Vision Builder for Automated Inspection 2020 Win32/64Eng 自动检测视觉生成器VBAI20.5 LabVIEW2020版适用
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Builder for Automated Inspection 2020 Win32/64Eng 自动检测视觉生成器VBAI20.5 LabVIEW2020版适用
NI Vision Builder for Automated Inspection 2020 VBAI2020视觉生成器，版本号20.5.0，标准图像处理软件，32位与64位英文版本，Windows系统。支持LabVIEW2020。可选择离线安装版本下载。VBAI的版本号现在也是很乱了，从早些年的VBAI2015/F1/F2/F3分别可用于LV2015/16/17到VBAI2018（适用LV2018）、VBAI2018SP1（适用LV2019）、VBAI2019（适用LV2019SP1），现在的VBAI2020适用LabVIEW2020，但是其版本号又成了20.5.0。一定要注意看自述文件及发行时间，以保证兼容相应的LabVIEW,在LabVIEW中有API可支持。
发布日期：
2020.9.21
版本：2020完整版，版本号20.5
支持系统：
Windows 7 (SP1) 32-bit
Windows 7 (SP1) 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
Windows Server 2016 64-bit
语言：英文
应用程序位数：32/64位
校验和：
文件大小: 3389925376 字节 (3.16 GB)
修改日期: 2020-09-19 06:03
MD5: 2ef262bdc414c9a230138e87fb0388c2（官方正确）
SHA1: 6586bd84af689a25fa335c16e2e92b25e46ad066
SHA256: 2c4632a6daa67dc3106f083a637a76800c7dee0589d2a8f2bcb8051eb2ca8b57
CRC32: b583eb83
百度网盘和NI官方离线版下载地址：
请注册视觉论坛会员登录后购买附件下载查看
NI Vision Builder for Automated Inspection 2020 ReadmeSeptember 2020This file contains important information about NI Vision Builder for Automated Inspection (Vision Builder AI), including installation instructions, new features, and known issues.OverviewSystem RequirementsApplication Software SupportInstallation InstructionsProduct Security and Critical UpdatesNew FeaturesSupported HardwareKnown IssuesBug FixesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsSoftware Requirements for Migrating an Inspection to LabVIEWUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1PC-Based Image Acquisition and I/O SupportAdditional ResourcesLegal InformationOverviewNI Vision Builder AI helps you to configure, benchmark, and deploy a system that addresses vision applications from pattern matching to code reading and presence detection to precision alignment and classification.For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Builder AI.System RequirementsNI Vision Builder AI 2020 has the following requirements:
MinimumRecommended
ProcessorPentium 4/M or equivalentCore Duo or equivalent
Memory512 MB RAM1 GB RAM
Display1,024 × 768 resolution video adapter with a 24- or 32-bit display1,280 × 1,024 resolution video adapter with a 24- or 32-bit display
Operating System
[*]Windows 10 (32- and 64-bit)
[*]Windows 10 IoT Enterprise LTSB 2016 (64-bit)3
[*]Windows 8.1 (32- and 64-bit)1
[*]Windows 7 SP1 (32- and 64-bit)2
[*]Windows Embedded Standard 7 SP12,3
[*]Windows Server 2012 R2 (64-bit)1
[*]Windows Server 2008 R2 SP1 (64-bit)2
BrowserMicrosoft Internet Explorer 6.0 or later
Hard Disk Space7.7 GB8.3 GB
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.NoteSupport for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.3Only supported as pre-installed on NI hardware.Application Software SupportNI Vision Builder AI 2020 supports the following application software versions, including service packs.
Application SoftwareVersions Supported by NI Vision Builder AI 2020
LabVIEW2017, 2018, 2019, 20201
LabWindows™/CVI™2015, 2017, 2019
TestStand2014, 2016, 2017, 2019
1 Required when using the NI Vision Builder AI Development Toolkit.即在VBAI中调用VI的功能，VBAI2020需要LabVIEW2020版本保存的VI才可以使用。Note: The Vision Builder AI API for .NET is now available as an open source on github at https://github.com/ni/vbai-dotnet.Installation InstructionsInstalling Vision Builder AIComplete the following steps to install Vision Builder AI:Note: You must be logged in with administrator privileges to install Vision Builder AI.
[*]Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.
[*]Select Install NI Vision Builder for Automated Inspection 2020 on the NI Vision Builder for Automated Inspection screen.
[*]Continue to follow the instructions on the screen.
Activating Vision Builder AIIf you do not activate a valid license, Vision Builder AI runs in evaluation mode and continues to prompt you to activate a license on each launch. At the end of the evaluation period you must activate a Vision Builder AI license to continue using the product.Note: While Vision Builder AI is in Evaluation mode, all features are available except Migrate Inspection to LabVIEW.Complete the following steps to activate the Vision Builder AI license:
[*]Launch Vision Builder AI.
[*]Click Activate when prompted to activate Vision Builder AI.
[*]Continue to follow the instructions on the screen. Login or register your NI account with the NI Licensing Wizard and enter your serial number when prompted.
Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.New FeaturesThe following list describes the new features in Vision Builder AI 2020:LabVIEW 2020 SupportVision Builder AI 2020 is fully supported on LabVIEW 2020.Supported HardwareWindows-Based Device SupportYou can use Vision Builder AI to configure and control the following Windows-based NI devices:
[*]NI CVS-1458 and 1459 Compact Vision Systems
[*]NI IC-3120, 3121, 3171, and 3173 Industrial Controllers
[*]NI ISC-178x Smart Cameras
Remote Target SupportYou can use Vision Builder AI to remotely configure and control a supported remote target running NI Linux Real-Time. Vision Builder AI supports the following remote targets:
[*]NI CVS-1458RT and 1459RT Compact Vision Systems
[*]NI IC-3120, 3121, 3171, 3172, and 3173 Industrial Controllers
[*]NI ISC-178x Smart Cameras
To use Vision Builder AI with a remote target, you must use Vision Builder AI to configure the remote target. For more information about using Vision Builder AI to configure the remote target, refer to the documentation included with the remote target or the NI Vision Builder for Automated Inspection: Configuration Help.Note: NI recommends using WebDAV to transfer files to and from a real-time target. For more information on using WebDAV to transfer files to and from a remote target, go to ni.com/info and enter the Info Code WebDAVTransfer.The following table illustrates when a remote target requires you to install driver software on the development computer.
Remote Target or Camera
Connected to a Remote TargetRequires Driver Software Installed
on Development Computer
NI Smart CameraNo
IEEE 1394No
GigE VisionNo
The following table illustrates which USB NI CompactDAQ chassis are supported by remote Vision Builder AI targets.
Remote TargetSupported USB NI CompactDAQ chassis
NI ISC-178x Smart Camera
[*]NI cDAQ-9171
[*]NI cDAQ-9174
[*]NI cDAQ-9178
NI CVS-1458 and NI CVS-1459 Compact Vision System
NI IC-312x Industrial Controller
NI IC-317x Industrial Controller
Known IssuesYou can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI Vision Builder AI 2020.Bug FixesRefer to the NI website for an up-to-date list of all bug fixes in this release.Accessing the HelpSee Additional Resources.Finding ExamplesSee Additional Resources.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.
Software Requirements for Migrating an Inspection to LabVIEWTo migrate an inspection to LabVIEW, Vision Builder AI 2020 requires LabVIEW 2020 or later and NI Vision Development Module 2020 or later.Some Vision Builder AI steps require additional software to successfully migrate an inspection to LabVIEW.
[*]OPC UA requires the LabVIEW OPC UA Toolkit.
[*]Ethernet/IP or Ethernet/IP adapter require NI-Industrial Communications for Ethernet/IP.
Refer to the following table for software requirements to migrate specific steps. Driver versions must support the target version of LabVIEW for migration.
Step NameRequirement
Acquire ImageNI-IMAQ
Acquire Image (IEEE 1394, GigE, or USB)NI-IMAQdx
Acquire Image (Smart Camera)NI-IMAQdx
Generate PulseNI-IMAQ
Generate Pulse (Vision RIO)NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems
NI Industrial Controller Device Drivers for industrial controllers
Read/Write I/ONI-IMAQ
Read/Write I/O (NI-DAQmx)NI-DAQmx
Read/Write I/O (Vision RIO)NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems
NI Industrial Controller Device Drivers for industrial controllers
Note:NI-IMAQ, NI-IMAQdx, and NI-IMAQ I/O are available on the NI Vision Acquisition Software DVD included with Vision Builder AI. The NI Industrial Controller Device Drivers DVD is provided separately with industrial controller devices. To download NI-DAQmx, visit ni.com/downloads/products/.Software Requirements for the Run LabVIEW VI StepThe Run LabVIEW VI step in Vision Builder AI 2020 supports VIs saved in LabVIEW 2020 or earlier.Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.PC-Based Image Acquisition and I/O SupportVision Builder AI supports the following types of image acquisition and I/O devices:
[*]NI image acquisition devices
[*]IEEE 1394 industrial digital cameras
[*]GigE Vision cameras
[*]DirectShow-compatible USB cameras
[*]IP cameras
[*]Digital or analog I/O from NI data acquisition (DAQ) devices
[*]Serial devices
Note: You must install driver software to acquire images from an image acquisition device connected to the development computer.NI Image Acquisition DevicesThis version of Vision Builder AI supports NI image acquisition devices that require NI-IMAQ driver version 4.6.4 or later. Specific devices may require later versions.Note: If you are using an image acquisition device, you must install NI Vision Acquisition Software before you install the image acquisition device. NI Vision Acquisition Software gives you access to Measurement & Automation Explorer (MAX), which is software you can use to configure NI devices.IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB CamerasThis version of Vision Builder AI supports IEEE 1394 cameras, GigE Vision cameras, USB3 Vision, DirectShow-compatible USB cameras, and requires NI-IMAQdx driver version 3.3 or later. Specific devices may require later versions.To acquire an image from one of these camera types when the camera is connected to the host computer, use the Acquire Image (1394, GigE, or USB) step. The Acquire Image (1394, GigE, or USB) step requires NI-IMAQdx, which can be installed from the NI Vision Acquisition Software DVD included with Vision Builder AI.You must configure an IEEE 1394 camera to use the NI-IMAQdx driver. Complete the following steps to use MAX to configure an IEEE 1394 camera to use the NI-IMAQdx driver.
[*]Launch MAX.
[*]In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.
[*]Expand NI-IMAQdx Devices to obtain a list of available cameras.
[*]Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.
NI Analog and Digital I/O DevicesThis version of Vision Builder AI supports digital and analog I/O from any NI data acquisition (DAQ) device using NI-DAQmx Global Virtual Channels. To support NI DAQ devices, Vision Builder AI requires NI-DAQmx 8.0 or later.Serial CommunicationTo support serial communication, Vision Builder AI requires NI-VISA 2.6.0 or later, which is included with Vision Builder AI. You can use the serial ports built into the PC or one of the following NI serial interfaces: NI PCI-232/x, NI PXI-8420/x, or NI PXI-8422/x. You do not need to install NI-VISA on the PC to use the serial port on a remote target.Deployment Policy for Vision Builder AIPursuant to the National Instruments Software License Agreement, Vision Builder AI software is licensed to run on only one machine. Deployed applications that use Vision Builder AI require that Vision Builder AI be installed and licensed on each host machine. Therefore, you must purchase a separate Vision Builder AI license for each host machine. For more information, refer to the enclosed National Instruments Software License Agreement or visit ni.com/legal/license.Licensing OptionsFor information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Vision Builder AI offers the following licensing options:
[*]Vision Builder AI Full-Featured (778649-35)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.
[*]Vision Builder AI Full-Featured for NI Real-Time Targets—Allows full access to all Vision Builder AI features on supported real-time targets, which can be used to configure, benchmark, and deploy inspections. This license is only included with certain hardware targets and does not include the Vision Builder AI Development Toolkit.
[*]Vision Builder AI Runtime (779799-35)—Allows you to deploy existing inspections to a Windows-based host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.
[*]Vision Builder AI Development Toolkit (779343-35)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.
Windows FirewallIf you are using the Windows Firewall and launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Select Allow access so that Vision Builder AI can communicate with your remote target.Additional ResourcesHow do I get started?Read the NI Vision Builder for Automated Inspection Tutorial, which provides exercises for learning how to perform basic machine vision techniques using Vision Builder AI.Where can I find reference information?Reference information for Vision Builder AI can be accessed through the following methods:
[*]From within Vision Builder AI by clicking the Show Context Help button.
[*]Select Start»All Programs»National Instruments»Vision Builder AI 2020»Vision Builder AI 2020 Documentation on your PC.
The following documents are provided with Vision Builder AI as online help:
[*]NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.
[*]NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.
[*]NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.
Use the Search tab in the help files to quickly locate specific information. For information about how to use the search functionality, refer to the Using Help»Searching Help topic in the help file.The following documents are provided with Vision Builder AI as Adobe PDF documents:
[*]Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.
[*]NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.
Where can I find examples?Access examples of common Vision Builder AI inspections by selecting Start»All Programs»National Instruments»Vision Builder AI 2020»Vision Builder AI 2020 Examples on your PC.Where else can I go for Vision Builder AI information?Visit ni.com/vision and the NI Developer Zone at ni.com/zone for the most up-to-date information about Vision Builder AI.Application Interface and ExamplesThe NIEXTCCOMPILERSUPP environment variable is provided as an alias to the location of C language support files. You can use this variable when compiling and linking an application. The Application Interface files (header and library files to include in applications) are placed in a centralized location to prevent users from accidentally overwriting them and to provide this NIEXTCCOMPILERSUPP environment variable.Note: $(NIEXTCCOMPILERSUPP) is configured as an environment variable on the target system. The variable evaluates by default to \Program Files\National Instruments\shared\ExternalCompilerSupport\C on a 32-bit system.
ItemInstalled Location
header files<$(NIEXTCCOMPILERSUPP)>\include
32-bit MSVC import libraries<$(NIEXTCCOMPILERSUPP)>\lib32\msvc
64-bit MSVC import libraries<$(NIEXTCCOMPILERSUPP)>\lib64\msvc
Legal InformationCopyright©2002-2020 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.375131G-01
视觉论坛http://visionbbs.com，中国大流量的专业机器视觉论坛 {:4_107:}{:4_107:}{:4_107:} 不错不错不错不错
不错不错不错不错
页:
[1]