NI-DCPower Driver 1.3 Win32/64Eng NI DC电源仪器驱动程序下载1.3
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-DCPower Driver 1.3 Win32/64Eng NI DC电源仪器驱动程序下载1.3
NI-DCPower
NI-DCPower为使用NI DC电源和源测量单元(SMU)的客户提供支持。
NI-DCPower是与所有NI可编程电源和SMU进行通信必需的NI仪器驱动程序。NI-DCPower是一种可兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供一系列操作和属性，可以执行波形或信号发生器的功能，并包含交互式软件前面板和示例。
1.3
文件大小: 918051250 字节 (875.52 MB)
修改日期: 2010-06-03 06:51
MD5: d2368b71e718260636d0d65c2a6fe148（官方正确）
SHA1: 8f1206d2311129ba1ccf8bbc57272e4e08bb2e50
SHA256: 181bf4558631a87f00b14b9ee7d937e9058a0b30f6da2660157723468b5dd6c6
CRC32: 872ba03f
NI-DCPower ReadmeVersion 1.3Thank you for using NI-DCPower for Windows Vista/XP/2000.This file contains important information about NI-DCPower and is organized into the following sections:
[*]New Features in Version 1.3
[*]Supported Hardware
[*]System Requirements
[*]Installed File Names and Locations
[*]Software
[*]Documentation
[*]Examples
[*]Uninstalling/Modifying NI-DCPower
[*]Known Issues
[*]Changes by Release
New Features in Version 1.3
[*]Japanese localization for driver, LabVIEW application programming interface (API), and documentation.
Supported HardwareNI-DCPower 1.3 and later supports the following power supply and SMU:
[*]NI PXI-4110
[*]NI PXI-4130
NOTE:If you are using a PXI product, notice that MXI-4 is supported under Windows Vista/XP/2000, but MXI-3 is supported under only Windows XP/2000.System RequirementsNI-DCPower 1.3 and later supports Windows Vista/XP/2000. It is recommended that you have the most recent service pack for your operating system installed.Minimum System
[*]Processor—Pentium 200 MHz or equivalent
[*]RAM—64 MB
[*]Microsoft Internet Explorer 5.5 or later
[*]A screen resolution of 800×600 with 256 colors
[*]Windows XP/2000, with all available critical updates and service packs
Recommended System
[*]Processor—Pentium III/Celeron 600 MHz or equivalent
[*]RAM—256 MB
[*]A screen resolution of 1024×768
[*]Windows Vista/XP/2000, with all available critical updates and service packs
Application Development Environments (ADEs)
[*]LabVIEW 7.1.1, 8.2.1, 8.5.1, or 8.6
[*]LabVIEW Real-Time Module 7.1.1, 8.2.1, 8.5.1, or 8.6
[*]LabWindows™/CVI™ 7.1 or later
[*]LabWindows™/CVI™ Real-Time Module
[*]Microsoft Visual C++ (MSVC) 6.0 or later
[*]Microsoft Visual Basic 6.0
Installed File Names and LocationsSoftware
[*]National Instruments file folder location, <NIDocDir>:
[*]Windows 2000/XP: Documents and Settings\All Users\Shared Documents\National Instruments
[*]Windows Vista: Users\Public\Documents\National Instruments
[*]National Instruments file folder location, <NIIVIPath>:
[*]Windows 2000/XP/Vista 32-bit: Program Files\IVI Foundation\IVI\
[*]Windows Vista 64-bit: Program Files (x86)\IVI Foundation\IVI\
NOTES:$(NIIVIPath) is configured as an environment variable on the target system.
If you upgraded an installation of IVI, your files may be located in the following location:
[*]Windows 2000/XP/Vista 32-bit: Program Files\IVI\
[*]Windows Vista 64-bit: Program Files (x86)\IVI\
ItemInstalled Location on Windows XP/2000
and Windows Vista
NI-DCPower<NIIVIPath>\Drivers\niDCPower
NI-DCPower Function Panel<NIIVIPath>\Drivers\niDCPower\niDCPower.fp
NI-DCPower Examples<NIDocDir>\niDCPower\Examples
NI-DCPower Header files<NIIVIPath>\Include
NI-DCPower Import Library files<NIIVIPath>\Lib
NI-DCPower DLL<NIIVIPath>\Bin
DocumentationDocumentation is available at Start»All Programs»National Instruments»NI-DCPower»Documentation. The documentation set is composed of the following documents:
[*]NI-DCPower Readme
[*]NI DC Power Supplies and SMUs Getting Started GuidePrinted and PDF format. Contains hardware and software installation, MAX configuration, and signal connection information.
[*]NI DC Power Supplies and SMUs HelpHTML help format. Contains power supply fundamentals, hardware device overview, programming information, LabVIEW reference, and C/CVI/VB reference sections.
[*]NI PXI-4110 SpecificationsPrinted and PDF format. Lists specifications for the NI PXI-4110 triple-output, programmable DC power supply.
[*]NI PXI-4110 Calibration ProcedurePDF format. Contains calibration instructions for the NI PXI-4110.
[*]NI PXI-4130 SpecificationsPrinted and PDF format. Lists specifications for the NI PXI-4130 dual-channel, power source-measure unit (SMU).
[*]NI PXI-4130 Calibration ProcedurePDF format. Contains calibration instructions for the NI PXI-4130.
[*]Maintain Forced-Air Cooling Note to UsersPrinted format. Contains important cooling information for NI DC power supplies and SMUs.
[*]Read Me First: Safety and Electromagnetic CompatibilityPrinted format. Contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
ExamplesRefer to Start»All Programs»National Instrument»NI-DCPower»Examples for the examples for the supported ADEs.Refer to the Installed File Names and Locations section for the installed locations of the example sets.Uninstalling/Modifying NI-DCPowerFor Windows 2000/XP, complete the following steps:
[*]Launch the Control Panel by selecting Start»Settings.
[*]Double-click Add/Remove Programs.
[*]Select National Instruments Software.
[*]Click Change/Remove.
[*]Select NI-DCPower 1.x from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows Vista, complete the following steps:
[*]Launch the Control Panel by selecting Start»Control Panel.
[*]Double-click Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall/Change button.
[*]Select NI-DCPower 1.x from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
Known Issues
[*]NI-DCPower devices might not be visible in Measurement & Automation Explorer (MAX) when deploying to a LabVIEW Real-Time target. For more information, search ni.com/kb using the the code 4RCAMBD4.
[*]Accessing the NI-DCPower API in LabVIEW 7.1
[*](LabVIEW 7.1) From the Functions palette, select All Functions»Instrument I/O»Instrument Drivers»NI-DCPower.
[*](LabVIEW 8.0 or later) From the Functions palette, select Measurement I/O»NI-DCPower.
[*]SignalExpress 1.1.1 and the IVI Power Supply step
The IVI Power Supply step does not support NI-DCPower in Signal Express 1.2. Use the native NI-DCPower Express step to access NI-DCPower from within SignalExpress 1.1.1.
[*]Running the NI-DCPower Simultaneous Update CVI example under Windows Vista
The Installer Detection feature in Windows Vista requests elevated privileges to run the NI-DCPower Simultaneous Update CVI example. To successfully launch the example from CVI, you must run CVI with elevated privileges. To run CVI with elevated privileges, right-click the NI LabWindows CVI icon and select the "Run as administrator" option from the context menu. Then, launch the NI-DCPower Simultaneous Update example in CVI.
[*]If you click a topic link in the NI–DCPower Function Reference Help section of the NI DC Power Supplies and SMUs Help, you cannot use the Back button in the HTML Help window toolbar to return to the original topic.
[*]When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.
[*]NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate, when using this product. These modes terminate any NI-DCPower operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.
Changes by Release1.3 from 1.2.1
[*]Japanese localization for driver, LabVIEW application programming interface (API), and documentation.
[*]New behavior: Error and self-test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) may experience a change in behavior.
1.2.1 from 1.2
[*]Added increment/decrement buttons to the voltage/current controls of the NI-DCPower Express VI
1.2 from 1.1.2
[*]Support for the NI PXI-4130 dual-channel, power SMU
[*]Support for the NI-DCPower Soft Front Panel (SFP)
Copyright© 2006–2008 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.PatentsFor patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.
页:
[1]