NI CompactRIO Module Support 12.0.1 Patch Win32Eng/Jpn/Chs NI-CompactRIO模块支持12.0.1补丁
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI CompactRIO Module Support 12.0.1 Patch Win32Eng/Jpn/Chs NI-CompactRIO模块支持12.0.1补丁
NI CompactRIO模块支持
NI CompactRIO Module Support支持CompactRIO控制器、CompactRIO机箱和CompactRIO单板控制器。
NI CompactRIO Module Support是一个驱动软件，用于支持CompactRIO系统的识别、编程和部署。除LabVIEW之外，您还必须安装NI CompactRIO Module Support以及LabVIEW Real-Time模块和/或LabVIEW FPGA模块，才能开始对硬件进行编程。
12.0.1安装补丁之前请先安装NI-RIO 12.0。
文件大小: 147333735 字节 (140.51 MB)
修改日期: 2012-08-14 22:55
MD5: c95d62d97ac544d2044b9bc322e06aad（官方正确）
SHA1: 49f1ebab0b01fb2f0bca141f10d74555ca394d36
SHA256: 5b5247a6fddd9a5625ec308aeb9c7eb3cd558bad5543659875d79dde1419f6e6
CRC32: 0e2bed06
NI CompactRIO Module Support 12.0.1 ReadmeAugust 2012ni.com/supportThis file contains important information about NI CompactRIO Module Support 12.0.1, including information on installing NI CompactRIO Module Support 12.0.1, descriptions of known issues for installing and using NI CompactRIO Module Support 12.0.1, and information about the hardware and software supported by NI CompactRIO Module Support 12.0.1.
[*]Installing NI CompactRIO Module Support 12.0.1
[*]What Is New in NI CompactRIO Module Support 12.0.1
[*]Supported Platforms
[*]Supported Hardware and Software
Installing NI CompactRIO Module Support 12.0.1Complete the following steps to install NI CompactRIO Module Support 12.0.1 for use with LabVIEW.
[*]Install LabVIEW.
[*]Install LabVIEW Real-Time.
[*]Install LabVIEW FPGA.
[*]Install NI CompactRIO 12.0.
[*]Install NI CompactRIO Module Support 12.0.1.
Supported Versions of LabVIEW
[*]LabVIEW 2012
[*]LabVIEW 2011 SP1
[*]LabVIEW 2010 SP1
Back to TopWhat Is New in NI CompactRIO Module Support 12.0.1
[*]Support for NI 9683 in LabVIEW 2012
Back to TopSupported PlatformsNI CompactRIO Module Support 12.0.1 supports the following platforms:
[*]Windows 7 Professional (32-bit and 64-bit)
[*]Windows Vista Business (32-bit and 64-bit)
[*]Windows XP Professional SP2
[*]Windows Server 2008 R2 (64-bit)
[*]Windows Server 2003 (32-bit)
Note: Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport
Back to TopSupported Hardware and SoftwareNI CompactRIO Module Support 12.0.1 provides support for C Series modules in all CompactRIO, Single-Board RIO, and R Series systems. Refer to the NI Developer Zone at ni.com for a complete list of the hardware that is supported by this and previous versions of NI CompactRIO as well as what versions of LabVIEW software are supported by each version of NI CompactRIO.For additional CompactRIO product support and information, refer to ni.com/compactrio.
Back to TopOther Installation Notes
This installation requires that version 3.1 of the MSI (Windows Installer) Engine is installed on your computer. If you do not have MSI 3.1 or later, the installer updates the engine automatically and may require you to restart your computer.If you are installing NI driver software on Windows Vista, you must first uninstall all National Instruments software versions older than the February 2007 release before proceeding with this installation. For additional information and tools to assist you in upgrading NI driver software on Windows Vista, refer to KnowledgeBase article 46BH366K at ni.com/kb.If you want to install from a network location, copy the entire contents of the installation disk to a single folder and run from that location.
Uninstallation InstructionsYou can uninstall NI software and drivers by selecting National Instruments Software in the Windows Add/Remove Programs application.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important InformationCopyright© 2004–2012 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksLabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.Other product and company names mentioned herein are trademarks or trade names of their respective companies.Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]