LabVIEW 2012 Jitter Analysis Toolkit Win32Eng LabVIEW抖动分析工具包2012版下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2012 Jitter Analysis Toolkit Win32Eng LabVIEW抖动分析工具包2012版下载
LabVIEW抖动分析工具包
LabVIEW抖动分析工具包可帮助您使用示波器或数字化仪自动执行测试测量。
LabVIEW抖动分析工具包是LabVIEW的一款软件附件，提供了一个函数库，可用于在自动化验证和生产测试环境中执行高吞吐量的抖动、眼图和相位噪声测量。该附件支持眼图模板定义和模板极限测试(mask limit)，而且如果使用的是多核机器，该附件可以加速线程安全测量。您可以创建和显示眼图和浴盆曲线。LabVIEW抖动分析工具包适用于使用第三方示波器和数字化仪或者PXI IF数字化仪、PXI示波器、C系列数字化仪模块等NI硬件的测试系统。此外，该附件还提供眼图、模板(mask)测试和随机抖动/确定性抖动(RJ/DJ)分离相关的示例程序。
2012（有两个EXE版本，大小，校验和，有所不同）
文件大小: 123570824 字节 (117.85 MB)
修改日期: 2012-06-15 22:17
MD5: 3f50f2f530b53e25de2d6ae51037e6ca（重复下载一致，可秒传）
SHA1: 3fe4ce670cfcda36444dac635858bb055356255e
SHA256: 4c0911c1a161dffb5ce3a9a1153969ce5330cc4e856552c6348734dc4849f29d
CRC32: e4fab34a
版本2
文件大小: 123558536 字节 (117.83 MB)
修改日期: 2013-08-03 06:40
MD5: 364d94e1cb4598c29452840015f2ee20（官方正确）
SHA1: 4ecd232d4c19202518c063ca269b93aea6d1143f
SHA256: d24d2ab3f861f173bd183c5940debe36ca4ff4ec1f6436f078e265c2acad6947
CRC32: 67e60478
百度和NI官方下载地址：
LabVIEW 2012 Jitter Analysis Toolkit ReadmeVersion 12.0June 2012This file contains information to introduce you to the LabVIEW 2012 Jitter Analysis Toolkit. This file also contains important information about the toolkit, including system requirements, installation instructions, new features, and known issues.OverviewSystem RequirementsInstallation InstructionsNew FeaturesUpgrade and Compatibility IssuesKnown IssuesBug FixesAccessing the Toolkit and HelpFinding ExamplesAutomating the Installation of NI ProductsOverviewThe LabVIEW Jitter Analysis Toolkit provides a library of VIs optimized for performing high-throughput, automated jitter, eye diagram, and phase-noise measurements. The toolkit is hardware-independent and can be used with NI high-speed and high-resolution digitizers as well as third-party oscilloscopes and digitizers.System RequirementsIn addition to the system requirements for the LabVIEW Development System, the Jitter Analysis Toolkit has the following requirements:
[*]LabVIEW 2012 Full or Professional Development System (32-bit)
[*]At least 150 MB of disk space
Refer to the LabVIEW Readme file in the labview directory for additional system requirements and supported operating systems for LabVIEW 2012.Installation InstructionsYou can install all of your LabVIEW products—including the Jitter Analysis Toolkit—using the LabVIEW 2012 Platform DVDs. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.To request additional LabVIEW Platform DVDs, refer to the National Instruments website.Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.New FeaturesThe LabVIEW 2012 Jitter Analysis Toolkit introduces the following new features.Characterizing Random and Periodic JitterThe Jitter palette includes the new RJ PJ Separation VI, which separates the random and periodic components of jitter in a jitter sequence and returns their RMS and peak-to-peak values.Support for Waveforms Represented by IntegersDepending on how you acquire waveform data, the Y data values that are part of the waveform data type might be double-precision, floating-point numeric values or 8-bit signed integers. Analyzing waveforms represented by integers reduces the size of the data you must analyze, which requires less memory. The following VIs include polymorphic instances that can operate on the waveform data type when it contains double-precision floating-point data or 8-bit signed integers:
[*]Area VI
[*]Burst Width
[*]Clock Recovery (Mean Clock)
[*]Clock Recovery by PLL Filter
[*]Clock Recovery by Second Order PLL
[*]Eye Data Generation
[*]Eye Height and Width
[*]Eye Pattern Limit Test
[*]Fall Time
[*]Find Transitions
[*]Level Crossing
[*]Max and Min Voltage
[*]Overshoot and Undershoot
[*]Peak to Peak Voltage
[*]Quality Factor
[*]Reference Bit Waveform Creation
[*]Reference Levels
[*]Rise Time
[*]Root Mean Square Voltage
[*]State Levels
Miscellaneous VI Enhancements and Behavior ChangesThe LabVIEW 2012 Jitter Analysis Toolkit includes the following VI enhancements and behavior changes:
[*]The Signal with Jitter VI contains a PJmetrics output, which returns characteristics of the periodic jitter contained in the waveform this VI generates.
[*]The Sequence to XY Graph VI no longer appears on the Jitter subpalette of the Jitter Analysis palette.
Upgrade Issues and Compatibility IssuesYou might encounter the following compatibility issues when you upgrade to the LabVIEW 2012 Jitter Analysis Toolkit:
[*]LabVIEW no longer supports the Periodic Jitter VI. Replace this VI in your applications with the nTone instance of the RJ PJ Separation VI.
[*]If you open VIs saved in a previous version of LabVIEW that contain the Level Crossing, Reference Levels, or Eye Height and Width VI, LabVIEW might prompt you to find missing subVIs. Click the Ignore Item button to dismiss the dialog, and LabVIEW opens the VI without errors.
[*]The Clock Recovery (Mean Clock) VI no longer contains a reset input.
Known IssuesYou can access the software and documentation known issues list online. Refer to the LabVIEW Toolkits Known Issues website for an up-to-date list of any known issues in the Jitter Analysis Toolkit.Bug FixesThe following items are the IDs and titles of a subset of issues fixed between the LabVIEW 2011 Jitter Anlaysis Toolkit and the LabVIEW 2012 Jitter Anlaysis Toolkit. This is not an exhaustive list of issues fixed in the current version of the Jitter Analysis Toolkit. If you have a CAR ID, you can search this list to validate the issue has been fixed.
IDFixed Issue
336767Clock Recovery (Mean Clock) VI returns error -20068 when processing certain waveforms
334701Rj Dj Separation VI does not appear on the Jitter Analysis Toolkit palette
334182Duty cycle distortion values yield inconsistent results
321442The high state level parameter is miscalculated and yields results that are higher than expected
288897Glitch appears in eye diagram even though actual waveform is correct
288895Clock Recovery (Mean Clock) VI does not sufficiently estimate unit interval for Eye Data Generation VI
285695Jitter Analysis Toolkit example VIs do not show up in Example Finder
Accessing the Toolkit and HelpTo access the Jitter Analysis Toolkit VIs, select View»Functions Palette from the block diagram in LabVIEW and navigate to the Addons»Jitter Analysis palette. You also can right-click any blank space on the block diagram to display the Functions palette.Refer to the Toolkits»Jitter Analysis VIs book on the Contents tab of the LabVIEW Help for more information about the Jitter Analysis Toolkit.Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Jitter Analysis Toolkit are located in the labview\examples\Jitter Analysis directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important InformationCopyright© 2010–2012 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksLabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]