NI-Industrial Communications for EtherCAT 15.0 Win32/64Eng 以太网控制自动化技术工业通信软件15.0版下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Industrial Communications for EtherCAT 15.0 Win32/64Eng 以太网控制自动化技术工业通信软件15.0版下载
NI-Industrial Communications for EtherCAT
NI-Industrial Communications for EtherCAT提供了EtherCAT主站支持，以支持NI控制器硬件上的确定性I/O。
NI-Industrial Communications for EtherCAT为用户使用CompactRIO控制器、PXI控制器或工业控制器提供支持。使用此软件，您可以通过使用基于EtherCAT总线的CompactRIO机箱或使用远程I/O硬件来扩展I/O。NI建议结合经过充分测试和验证的NI EtherCAT产品使用此驱动软件。
15.0
文件大小: 331330336 字节 (315.98 MB)
修改日期: 2015-07-29 20:25
MD5: a510bda53cdc348ab2d1b9c547a0baf2
SHA1: 20f5903e2e17b26f69177a47ff6e2d7fc3eb3c7d
SHA256: 6625e366209b49dd248c69f020f3a6dfea410edeb87947956dc561d26ecfc99d
CRC32: 9316d001
15.0Patch安装补丁之前请先安装NI-Industrial Communications for EtherCAT 15.0。
文件大小: 25583680 字节 (24.40 MB)
修改日期: 2016-03-14 10:40
MD5: 3b2415e83dafb62e330814e6d38ac423
SHA1: 9f09b2e04e4cfce0c712708331e4213739603ca5
SHA256: 8190d9a53d74d4c9154890ec1d48eb911be6828cb65f7ee1ff4b50ea683ea0cb
CRC32: 5c640b74
百度网盘和NI官方下载地址：
NI-Industrial Communications for EtherCAT® 15.0 ReadmeJune 2015This file contains important information about the NI-Industrial Communications for EtherCAT software, including installation instructions, new features, and known issues.OverviewSystem RequirementsInstallation InstructionsProduct Security and Critical UpdatesNew FeaturesSupported HardwareDriver Version Naming ChangesKnown IssuesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsHow to Use NI Software with Microsoft Windows 8.xNI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003Legal InformationOverviewThe NI-Industrial Communications for EtherCAT software provides an EtherCAT master driver to support the real-time EtherCAT network operations. Use the software with the LabVIEW Real-Time Module to configure the EtherCAT network and map the EtherCAT device signals to the LabVIEW I/O variables.System RequirementsNI-Industrial Communications for EtherCAT 15.0 supports the following operating systems.
[*]Windows 8.1/8.0/7/Vista (32-bit and 64-bit)
[*]Windows XP SP3 (32-bit)
[*]Windows Server 2012 R2 (64-bit)
[*]Windows Server 2008 R2 (64-bit)
[*]Windows Server 2003 R2 (32-bit)
NoteNI-Industrial Communications for EtherCAT supports only R2 editions of Windows Server.Software RequirementsTo install the NI-Industrial Communications for EtherCAT software, install the following prerequisite software.
[*]LabVIEW 2012 or later
[*]LabVIEW 2012 Real-Time Module or later
[*]NI CompactRIO Device Drivers August 2015
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.
Notes
[*]NI 9144 is the only EtherCAT slave that has FPGA support in LabVIEW. To use the NI 9144 in FPGA Mode, install the LabVIEW 2012 FPGA Module or later on the host computer and then download a bitfile to the FPGA of the NI 9144. You can compile or copy a bitfile to download to the FPGA.
[*]NI 951x Series drive interface modules require the LabVIEW 2012 SoftMotion Module or later to work for EtherCAT.
Installation InstructionsBefore installing the NI-Industrial Communications for EtherCAT software, log on as Administrator or as a user with Administrator privileges. The NI-Industrial Communications for EtherCAT software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-Industrial Communications for EtherCAT software on the host computer.
[*]Insert the NI-Industrial Communications for EtherCAT software media into a drive. The installer launches if the drive plays media automatically. If the installer does not launch automatically, navigate to the media using Windows Explorer and launch the autorun.exe file from your NI-Industrial Communications for EtherCAT software media.
[*]The installation wizard guides you through the necessary steps to install the NI-Industrial Communications for EtherCAT software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking the Cancel button.
[*]When the installation is complete, click the Finish button.
NoteAfter installing the NI-Industrial Communications for EtherCAT software on the host computer, if you want to use the software on a real-time controller, refer to NI-Industrial Communications for EtherCAT® Installation Guide to learn how to install the NI-Industrial Communications for EtherCAT software on the real-time controller. This manual is available in PDF-format in the NI-Industrial Communications for EtherCAT media or in printed-format shipped with the media.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.New FeaturesVersion 15.0
[*]Added support for LabVIEW 2015.
[*]Added support for new C series modules—NI 9220, NI 9222, NI 9223, NI 9242, NI 9244, and NI 9437.
[*]Added support for NI sbRIO-9607/9627. Refer to the Supported Hardware section for a list of real-time controllers that each version of the NI-Industrial Communications for EtherCAT software supports.
Version 14.5
[*]Added support for LabVIEW 2014 SP1.
[*]Added support for new CompactRIO real-time controllers.
Version 14.0
[*]Added EtherCAT master support for new real-time controllers.
[*]Added support for new C series modules—NI 9212 and NI 9218.
Version 2.7
[*]Added support to import device profiles to real-time controllers.
Version 2.6
[*]Added support for NI cRIO-9068.
[*]Added support for new C Series modules—NI 9381 and NI 9482.
Version 2.5
[*]Added support for more than eight modules on third-party modular slave devices.
[*]Added support for 4-port slave devices when DC is not enabled.
Version 2.4
[*]Added support for sending and receiving raw PDO data.
[*]Added support for monitoring slave device states.
Version 2.3
[*]Fixed a latency issue caused by using fiber-optic converters in an EtherCAT network.
[*]Added support for third-party C series modules in the NI 9144 FPGA mode.
[*]Added support for using Remote Programmatic API with the LabVIEW Run-Time Engine.
[*]Extended the maximum scan period to 1 second.
Version 2.2
[*]Added support for cable redundancy.
[*]Added support for Modular Device Profiles.
[*]Added support for NI cRIO-908x.
Version 2.1
[*]Improved the performance of user-defined variables.
Version 2.0
[*]Added support for Programmatic Configuration.
[*]Added support for synchronization among multiple NI EtherCAT masters.
[*]Added support for NI PXIe-8133 and RT desktop target.
[*]Added support for NI 9214 C Series Module.
Version 1.2
[*]Added support for NI cRIO-9023, NI 9792, and EVS-146x Series.
[*]Added support for new C series modules.
Version 1.1
[*]Added LabVIEW FPGA Module support for the NI 9144.
[*]Added support for Industrial Controllers and NI cRIO-9024.
[*]Added support for new C series modules, including the NI 951x Motion modules.
Version 1.0.2
[*]Fixed incorrect installer dependency.
Version 1.0.1
[*]Added support for NI cRIO-9022.
Version 1.0
[*]Initial support for the EtherCAT protocol.
Supported HardwareRefer to Supported Hardware for NI-Industrial Communications for EtherCAT for the latest information about the hardware that the NI-Industrial Communications for EtherCAT software supports.Driver Version Naming ChangesNI-Industrial Communications for EtherCAT versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI-Industrial Communications for EtherCAT 15.0 is the version released with LabVIEW 2015. The last version released under the old numbering scheme is NI-Industrial Communications for EtherCAT 2.7. The first version released under the new numbering scheme is NI-Industrial Communications for EtherCAT 14.0.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the NI-Industrial Communications for EtherCAT software.Accessing the HelpRefer to the NI-Industrial Communications for EtherCAT® Help, available by selecting Help»NI-Industrial Communications for EtherCAT from LabVIEW, for information about the NI-Industrial Communications for EtherCAT software.Finding ExamplesLabVIEW examples for the NI-Industrial Communications for EtherCAT software are in the labview\examples\indcomecat folder. You can modify an example VI to fit an application or copy an example and paste the example to a VI you create.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.xWhen you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.NoteNI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.x DesktopStart screenRight-click application and select Pin to Start
Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).For more information about NI support for Windows 8.x, visit ni.com/windows8.NI-Industrial Communications for EtherCAT Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016NI-Industrial Communications for EtherCAT will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-Industrial Communications for EtherCAT that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
LabVIEWlifecycle
LabWindows™/CVI™cvi_lifecycle
Measurement Studiomstudiolifecycle
TestStandtslcp
DIAdemddlcp
SignalExpressselcp
VeriStandnivslifecycle
Legal InformationCopyright© 2008–2015 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.CreditsThis product includes components that use the Expat XML Parser. In regards to the Expat XML Parser, the following notice applies:Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.374786C-01
页:
[1]