NI IVI Compliance Package 3.0 Win32Eng NI IVI合规软件包ICP3.0下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI IVI Compliance Package 3.0 Win32Eng NI IVI合规软件包ICP3.0下载
IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。
Win32Eng
3.0
文件大小: 63398807 字节 (60.46 MB)
修改日期: 2019-06-25 02:45
MD5: 8caba55c00acc1864b1cbad97cbb38ed
SHA1: 04f1502ba425370b170fdb18490a4d50ff466f3a
SHA256: fc4cb3ac9dd4cdc60f0495f144e4d11514030bd5485a5a64bce07fef89081a82
CRC32: 4bd73092
百度网盘和NI官方下载地址：
NI IVI Compliance Package 3.0Documentation File© Copyright 1999–2007. National Instruments Corporation. All rights reserved.CVI™, IVI™, LabVIEW™, Measurement Studio™, National Instruments™, NI™, ni.com™, NI-DMM™, NI-FGEN™, and TestStand™ are trademarks of National Instruments Corporation. Other product and company names mentioned herein are trademarks or trade names of their respective companies.IntroductionIVI Compliance Package (ICP) 3.0 is an update release of IVI Compliance Package 2.5. This release includes the following new features:
[*]IVI class driver support for LabVIEW 8.2.1 (can be used with LabVIEW 8.2)
[*]Support for Windows Vista (x86 and x64)
ICP 3.0.0f1 fixes a link error that occurs when building a Microsoft Visual Studio C++ application that links to multiple IVI import libraries (IVI Engine and/or IVI Class Drivers).Note: IVI Compliance Package 3.0 supports only 32-bit applications on 64-bit Windows Vista. For more information on using National Instruments products with Windows Vista, visit ni.com/vista.Refer to the IVI Compliance Package Release Notes, Version 3.0, for general information about this product.System RequirementsThis installation requires one of the following Microsoft operating systems:
[*]Windows 2000 Service Pack 4
[*]Windows XP
[*]Windows Vista x86
[*]Windows Vista x64
Availability/InstallationIVI Compliance Package is included in the National Instruments Device Drivers CD Set. A stand-alone version is available on ni.com.Before installing IVI Compliance Package 3.0, consider the following issues:
[*]If you plan to use IVI Compliance Package 3.0 with LabVIEW, LabWindows™/CVI™, and/or Measurement Studio, make sure that you have already installed LabVIEW version 7.1 or later, LabWindows/CVI version 6.0 or later, and/or Measurement Studio version 6.0 or later.
[*]For compatibility reasons, the IVI Compliance Package 3.0 installation process enables write permissions for the Program Files\IVI directory on Windows Vista systems.
[*]National Instruments recommends that you close all other applications before you install IVI Compliance Package 3.0.
To install the stand-alone, Web-only IVI Compliance Package 3.0 version, complete the following steps:
[*]Download the IVI Compliance Package 3.0 self-extracting archive from http://www.ni.com/downloads by navigating through the Drivers and Updates link.
[*]Double-click the self-extracting archive to launch the installer.
[*]Click OK to begin installation.
[*]Follow the directions that appear on the screen.
Known Incompatibilities
[*]There are no known incompatibilities with upgrading from previous IVI Compliance Package versions to IVI Compliance Package 3.0.
[*]NI-Spy version 2.2 and earlier are not compatible with IVI Compliance Package 3.0. If you use NI-Spy version 2.2 or earlier, do not upgrade to IVI Compliance Package 3.0.
[*]NI TestStand version 2.0.1 is not compatible with IVI Compliance Package 3.0. If you use NI TestStand version 2.0.1 and want to install IVI Compliance Package for the first time, do not upgrade to IVI Compliance Package 3.0, because it does not include support for NI TestStand version 2.0.1. Previous versions of IVI Compliance Package can be installed instead.
Installed ComponentsIVI Compliance Package 3.0 installs the following components:
[*]IVI class drivers
[*]IVI class driver LabWindows/CVI support
[*]IVI class driver C++ wrappers for Measurement Studio (Windows 2000 and XP only)
[*]IVI class driver wrappers for LabVIEW 7.1, 8.0, and 8.2.1
[*]IVI class simulation drivers
[*]IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio
[*]IVI Shared Components, version 1.4.0
[*]IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.1 and later
[*]Online help
Note: The IVI Compliance Package 3.0 stand-alone, web-only distribution does not install NI-Spy or MAX. You can install NI-Spy and MAX using several other National Instruments products, including the NI Device Drivers CD Set.Note: You must have MAX 4.1 or later installed to use the IVI Configuration utility in MAX.Note: As of IVI Compliance Package 2.5, the IVI Class Driver files are no longer installed in the VXIPNP directory. These files will continue to be installed in the IVI directory.Note: IVI class simulation drivers and IVI Soft Front Panels used to be distributed with the IVI Driver Toolset. Since the IVI Driver Toolset has been discontinued, the IVI class simulation drivers are now distributed with the IVI Compliance Package 2.5 and later. The IVI Soft Front Panels are available upon request to instrument.drivers@ni.com.Note: The LabWindows/CVI Instrument Driver Developers Guide (iddg.pdf) is no longer installed with ICP 3.0. This file gets installed with LabWindows/CVI. When you upgrade to ICP 3.0, the file will be removed from your system. To replace the file, run the LabWindows/CVI installation in the Repair mode.Uninstall ConsiderationsComplete the following steps to uninstall IVI Compliance Package 3.0:
[*]Select Start»Settings»Control Panel»Add or Remove Programs.
[*]Select National Instruments Software and click Change/Remove.
[*]Select NI IVI Compliance Package 3.0 and click Remove.
Note: After you uninstall IVI Compliance Package 3.0, the IVI Shared Components remain on the system. Complete the following steps to uninstall the IVI Shared Components:
[*]Select Start»Settings»Control Panel»Add or Remove Programs.
[*]Select IVI Shared Components and click Change/Remove.
Note: If you installed IVI Compliance Package 3.0 as part of another distribution that depends on IVI Compliance Package 3.0, you cannot uninstall IVI Compliance Package 3.0 without uninstalling the dependent product.Known Issues
[*]LabVIEW users: Downcasting from a class driver to a specific driver using property nodes may return an error in the following cases:
[*]You use a combination of specific driver VIs and specific driver property nodes.
[*]You use a specific driver property node with inherent properties.
Use one of the following workarounds to avoid this error:
[*]Do not use specific driver property nodes.
[*]Use specific driver property nodes but without any inherent properties and not in the conjunction with specific driver VIs.
[*]LabVIEW users: A VI that makes calls to an IVI class driver and an IVI specific driver in parallel by branching off of the same instrument handle will result in an IVI_ERROR_NOT_INITIALIZED error being returned from the call to the class driver.
[*]National Instruments IVI libraries, tools, and utilities support only single-byte character strings. You cannot use multi-byte characters, such as those commonly used in Chinese, Japanese, and Korean operating systems. Only single-byte characters, such as ASCII characters, may be passed to IVI function calls, used to set directory paths, and used to create entries in the MAX IVI Configuration Utility.
[*]IVI help in MAX requires Internet Explorer 5.0 or higher. Without Internet Explorer 5.0 or higher, IVI category help and the dynamic item help does not appear in MAX.
页:
[1]