NI IVI Compliance Package 18.0 Win32/64Eng NI IVI合规软件包ICP18.0下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI IVI Compliance Package 18.0 Win32/64Eng NI IVI合规软件包ICP18.0下载
IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。
Win32/64Eng
18.0
文件大小: 248893768 字节 (237.36 MB)
修改日期: 2019-06-25 02:45
MD5: 91cd10488d128aa801fd3e96ff9b7238
SHA1: 4aa4bec1a0796290a2b11ea8ba96bcf1c0f08c25
SHA256: fcc1b3c39e3d5be8799e004d6d2be47e4e48dc8fa7f83dbca2b25cb8cd64770f
CRC32: 765d63f0
百度网盘和NI官方下载地址：
NI IVI Compliance Package 18.0 ReadmeMay 2018This file contains important information about the IVI Compliance Package (ICP), including installation instructions, new features, a partial list of bugs fixed for ICP 18.0, and known issues.About IVI Compliance PackageInstalled ComponentsSupported Operating SystemsNI Application Software SupportInstallation InstructionsUninstall ConsiderationsLabWindows/CVI Version SupportProduct Security and Critical UpdatesNew Features and Bug FixesKnown IssuesKnown IncompatibilitiesLabVIEW NXG Support and ConsiderationsAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1LabVIEW NXG Support and ConsiderationsLegal InformationAbout IVI Compliance PackageThe IVI Compliance Package is a software package that contains the IVI class drivers and support libraries necessary to develop and use applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation. You can use the IVI class drivers in the IVI Compliance Package with IVI specific drivers.IVI class drivers implement functions and attributes for controlling an instrument within a specified class, as defined by the IVI Foundation. The IVI Compliance Package provides IVI class drivers for the following specifications:
[*]IviACPwr
[*]IviCounter
[*]IviDCPwr
[*]IviDigitizer
[*]IviDmm
[*]IviDownconverter
[*]IviFgen
[*]IviPwrMeter
[*]IviRFSigGen
[*]IviScope
[*]IviSpecAn
[*]IviSwtch
[*]IviUpconverter
IVI specific drivers are drivers for the most popular instruments from all of the currently defined IVI Foundation classes and from the largest instrument manufacturers including National Instruments, Keysight Technologies, and Tektronix. You can create IVI specific drivers yourself, or download them from ni.com/idnet.Installed ComponentsDepending on the software support you select when you install ICP 18.0, the installation includes one or more of the following components:
[*]IVI class drivers
[*]IVI class simulation drivers
[*]IVI class driver LabWindows/CVI support
[*]IVI class driver wrappers for LabVIEW 2015, 2016, 2017, and 2018
[*]IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio
[*]IVI-COM adapters (32-bit only)
[*]IVI Shared Components 2.6
[*]IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.7 and later
[*]Documentation
Supported Operating SystemsICP has the following requirements:
[*]Windows 10/8.11/7 SP12
[*]Windows Embedded Standard 7 SP12
[*]Windows Server 2012 R21
[*]Windows Server 2008 R2 SP12
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.NoteIn 2016 ICP dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. ICP 18.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use ICP 18.0 to an unsupported OS. Additionally, after installing ICP 18.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.NoteSupport for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.NI Application Software SupportThe following table lists the NI application software versions, including service packs, supported by ICP. If you are not using NI application software, refer to Microsoft Visual Studio Support.
NI Application SoftwareVersions Supported by IVI Compliance Package
NI LabVIEW2015, 2016, 2017, 2018
NI LabWindows™/CVI™7.1, 8.0, 8.5, 9.0, 2009, 2010, 2012, 2013, 2015, 2017
Installation InstructionsInstalling ICP for LabVIEW and LabWindows/CVIICP is included in the National Instruments Device Drivers media. A stand-alone web distribution version is available from ni.com/downloads.NoteNational Instruments recommends that you close all other applications before you install ICP 18.0.To install the stand-alone, web-only version of ICP, complete the following steps:
[*]Download the ICP 18.0 self-extracting archive file from http://www.ni.com/downloads/drivers/ by searching for IVI compliance Package.
[*]Double-click the self-extracting archive file to launch the installer.
[*]Click OK to begin installation.
[*]Follow the directions that appear on the screen.
Installing ICP for LabVIEW NXGNI automates LabVIEW NXG installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.Complete the following steps to install ICP for LabVIEW NXG.
[*]Visit ni.com/info and enter the info code NXGDownload to access the LabVIEW NXG download page.
[*]Click Download LabVIEW NXG 1.0.
[*]NI Package Manager installs, then automatically opens a download window.
[*]Select LabVIEW NXG Suite and click the green Install button.
[*]Select LabVIEW NXG 1.0 and ICP 18.0.
[*]Complete the installer instructions to download LabVIEW NXG 1.0 and ICP 18.0.
Installation Notes
[*]ICP 18.0 stand-alone, web-only distribution does not install NI I/O Trace (formerly known as NI-Spy) or MAX. You can install NI I/O Trace and MAX using several other National Instruments products, including the NI Device Drivers media.
[*]The installation directory for LabWindows/CVI IVI Class examples and IVI Class Simulation drivers has been changed. The new installation directory is <All Users>\Documents\National Instruments\CVI\Samples\IVI directory.
[*]ICP 3.2 and later versions include IVI-COM adapters, which enable users to use IVI-C and IVI-COM specific drivers interchangeably in the same 32-bit application. For more information on IVI-COM adapters, refer to the IVI-C Class Driver Support for IVI-COM Specific Drivers document.
[*]ICP 4.5 and later versions install alternate FP and SUB files for the IviFgen class driver in order to support setting 64-bit integer attributes. For more information, refer to KnowledgeBase 5WOA752F: Issue Setting IviFgen Attribute ID Using Get/Set/CheckAttributeViInt64 Functions.
[*]If you use ICP 4.5 or later to build a driver, the driver will work on a system that has ICP 2.5 or later.
[*]If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/info and enter the Info Code exjq43 for more information and steps to resolve this issue.
Uninstall ConsiderationsComplete the following steps to uninstall ICP 18.0:
[*]From the Control Panel, select Uninstall a Program.
[*]Select National Instruments Software.
[*]Select NI IVI Compliance Package 18.0.
[*]Click Remove.
Note: After you uninstall ICP 18.0, the IVI Shared Components remain on the system. To remove the remaining components, right-click IVI Shared Components 2.6 and select Uninstall/Change.Note: If you installed ICP 18.0 as part of another distribution that depends on ICP 18.0, you cannot uninstall ICP 18.0 without uninstalling the dependent product.LabWindows/CVI Version SupportThe IVI Compliance Package provides support only for the latest version of LabWindows/CVI installed on your computer. If you install the IVI Compliance Package on a computer with LabWindows/CVI installed, then upgrade to a later version of LabWindows/CVI, complete the following steps to modify the IVI Compliance Package installation to get IVI support for the later version of LabWindows/CVI:
[*]From the Control Panel, select Uninstall a Program.
[*]Select National Instruments Software.
[*]Select NI IVI Compliance Package 18.0 and click Modify.
[*]For the LabWindows/CVI Support feature under IVI Class Drivers, select Remove this feature and complete the installation.
[*]Repeat steps 1 through 3.
[*]For the LabWindows/CVI Support feature under IVI Class Drivers, select Install this feature to a local drive and complete the installation.
This process removes IVI class driver support for the previous version of LabWindows/CVI and adds this support for the later version of LabWindows/CVI.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.New Features and Bug FixesThis release includes the following new features and bug fixes:
[*]CAR#672626: Allow adding new repeated capabilities on-the-fly
[*]CAR#650181: ICP installer no longer unlocks the VXIPNP directory
[*]CAR#671190: Updated the IVI class driver header files for IviDigitizer, IviPwrMeter, and IviSpecAn to include defined values for function parameters
[*]Include IVI Shared Components 2.6
[*]Miscellaneous installer changes
Known Issues
[*]National Instruments IVI libraries, tools, and utilities support only single-byte character strings. You cannot use multi-byte characters, such as those commonly used in Chinese, Japanese, and Korean operating systems. Only single-byte characters, such as ASCII characters, may be passed to IVI function calls, used to set directory paths, and used to create entries in the MAX IVI Configuration Utility.
[*]NI-Spy is now known as NI I/O Trace. Images in the National Instruments IVI Driver Help continue to reflect the NI-Spy name. However, the general functionality depicted in the images remains the same.
[*]To build the IVI Class Simulation drivers using LabWindows/CVI 2015 or later, make sure to include the htmlhelp.lib and BufferOverflowU.lib files from the Windows SDK version 8.1.
Known Incompatibilities
[*]In ICP 18.0 and IVI Shared Components 2.6, the installers no longer unlock the IVI Foundation directory. Therefore, you no longer can modify the files installed under the IVI Foundation directory. Furthermore, if you want to make IVI configuration changes in MAX, you must launch MAX with Administrator privileges.
LabVIEW NXG Support and ConsiderationsThe following sections detail considerations for using LabVIEW NXG with ICP 18.0.LabVIEW NXG Operating Systems and System RequirementsSoftware support for LabVIEW NXG differs in the following ways:
[*]System requirements—Only 64-bit (x64) processors are supported.
[*]Operating system—Only 64-bit operating systems are supported. Refer to the Supported Operating Systems section for more information.
LabVIEW NXG HelpView context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.Additional documentation is available online at ni.com/manuals.LabVIEW NXG ExamplesLaunch LabVIEW and click the Learning tab.LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10,ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.Legal InformationCopyright© 1999–2018 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.376942B-01
页:
[1]