LabVIEW 2014 SP1 Education Suite Win32Eng LabVIEW2014SP1教学版套件英文版
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW 2014 SP1 Education Suite Win32Eng LabVIEW2014SP1教学版套件英文版
文件大小: 7810443264 字节 (7.27 GB)
修改日期: 2017-07-13 20:57
MD5: 084ec5f94488a13346281a82a02667ad（官方正确）
SHA1: 7f8d3dae26a5dbc75ce06c2d5ff4109478d53bbf
SHA256: d9d2eee0d519037e24e10437fbf9be8a916090bf340aef435a66e27d3f0bb23c
CRC32: 16b9b6ab
百度网盘与NI官方下载地址：
LabVIEW for Education Readme for WindowsApril 2015LabVIEW for Education is a software programming environment tailored for educational purposes. You can use LabVIEW for Education to teach and learn science and engineering concepts through a project-based curriculum. This readme file contains important information about the software.OverviewSystem RequirementsChoosing a Custom EnvironmentBug FixesKnown IssuesInstallation and ActivationFinding HelpFinding ExamplesAutomating the Installation of NI ProductsOverviewLabVIEW for Education installs the following products for the respective operating systems. Refer to the readme of each product for information specific to that product.
[*]LabVIEW 2014 Service Pack 1 (SP1)
[*]LabVIEW for Education custom environment
[*]LabVIEW for LEGO® MINDSTORMS® custom environment
[*]LabVIEW 2014 SP1 Module LEGO® MINDSTORMS®
[*]NI ELVISmx 14.0
[*]NI Vision Builder for Automated Inspection 2014 SP1*
[*]NI Vision Development Module 2014 SP1
[*]NI-DAQmx 14.2
[*]Vernier® SensorDAQ®, LabQuest™, LabQuest Mini™, and Go!™
*Refer to the KnowledgeBase on ni.com for information about the difference between the NI Vision Builder for Automated Inspection, NI Vision Development Module, and the NI-IMAQdx Driver Software.
System RequirementsLabVIEW for Education has the following system requirements:
[*]Windows 8/7/Vista/XP SP3 (32-bit)
[*]LabVIEW for Education is a 32-bit application that also runs on 64-bit versions of Windows 8, Windows 7, and Windows Vista.
[*]6.86 GB of disk space for installation of all products
Refer to the LabVIEW 2014 SP1 Readme on ni.com for information about system requirements for LabVIEW 2014 SP1.
Choosing a Custom EnvironmentLabVIEW for Education allows you to work in customized environments depending on which palettes and options you want readily accessible. You can switch between the customized LabVIEW for Education environment, which includes the products listed above, the LabVIEW for LEGO® MINDSTORMS® environment, which lets you focus on programming the NXT or EV3 brick, or the full LabVIEW environment, which displays all LabVIEW options and palettes. To choose an environment, select Tools»Choose Environment.NoteThe LabVIEW for Education and the LabVIEW for LEGO® MINDSTORMS® shortcuts that appear on the Desktop or in the Start menu always open the custom environment that they name. Specifying a new default environment in the Choose Environment dialog box only sets the default environment that opens when you use the National Instruments LabVIEW 2014 SP1 (32-bit) Start menu shortcut.
Bug FixesThe following items are a subset of issues fixed since the last release of LabVIEW for Education.
[*]Wait For VIs added for EV3 sensors.
[*]LEGO Steering On VI added for steering support for LEGO Motors.
[*]The NXT/EV3 Terminal and Robot Project Center notifies the user if a brick in firmware update mode is detected.
Refer to the National Instruments website for a list of bug fixes in LabVIEW 2014 SP1.
Known IssuesThe LabVIEW for Education software contains the following known issues at the time of release:
[*]A LabVIEW crash, an error message about Fantom.dll, and inconsistent behavior from the NXT/EV3 Terminal are all consequences of deleting dependencies of Fantom.dll. To correct this behavior, navigate to the Control Panel\Programs\Programs and Features directory, and repair the LEGO MINDSTORMS NXT Driver installation.
[*]After you connect to an NXT or EV3 brick using Bluetooth, the Find NXT/EV3 window displays the brick as available for connection even when Bluetooth is disabled or the brick is not present. If you try to connect to the brick when the Bluetooth connection is off, the display updates the status to unavailable.
[*]The Moving output of the Motor Status VI is TRUE only when performing a move with the Move a Fixed Distance VI. These Boolean outputs always return FALSE if the move initiates with the Move DC Motors VI.
[*]The following code is not supported in VIs that you download to an EV3 brick:
[*]Some auto-indexing capabilities on While Loops—Auto-indexing input tunnels are supported.
[*]Compare Elements mode for the Max & Min function is not supported for arrays and clusters.
[*]Conditional terminals or parallelism on For Loops
[*]Formula Nodes
[*]Complex numbers used with the asin, acos, atan, and atan2 functions.
[*]The following code is not supported in VIs that you download to an NXT brick:
[*]Some auto-indexing capabilities on While Loops—Auto-indexing input tunnels are supported.
[*]Compare Elements mode for the Max & Min function is not supported for arrays and clusters.
[*]Conditional terminals or parallelism on For Loops
[*]Formula Nodes
[*]Byte Array To String functions if you try to coerce a 32-bit array
[*]Numeric operations involving a cluster and an array of clusters
[*]Not function if you try to negate an array
[*]Divide function if both inputs are zeros—Divide function returns zero instead of NaN.
[*]Conversion functions if you try to convert floating point numbers to integers—Outputs are truncated instead of rounded to the nearest integer.
[*]Complex numbers used with the asin, acos, atan, and atan2 functions.
[*]The Value property does not update front panel objects. Use local variables or wire values directly to terminals to update front panel objects.
[*]Filenames with special or multibyte characters are not supported in the Robot Project Center.
[*]Unexpected behavior can occur in the Schematic Editor when you work on a remote desktop.
[*]When adding an image for your robot project profile, use an image that is 123 × 89 pixels (width × height).
[*]In Direct Mode, the Draw VIs that are instances of the Display polymorphic VI do not clear the screen before drawing over the running program or menu screen. To avoid this, use the Clear Display VI before using the Draw VIs.
[*]The LabVIEW Module for LEGO MINDSTORMS API is not supported in Application Builder.
[*]If a VI targeted to an NXT or EV3 brick is open when you change environments by selecting Tools»Choose Environment, the menus of that VI become unresponsive. Click the X in the corner of the VI window to close the VI.
Installation and ActivationRefer to the LabVIEW for Education DVD packaging for information about installing and activating LabVIEW for Education.
Finding HelpFollow the steps in the printed LabVIEW for Education Quick Start Guide to start using the software immediately.Refer to the LabVIEW LEGO MINDSTORMS NXT Module Help, accessible by selecting Help»MINDSTORMS Module Help in LabVIEW, for detailed information about the LabVIEW Module for LEGO MINDSTORMS included with LabVIEW for Education.Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help in LabVIEW, for information about advanced LabVIEW concepts and procedures.
Finding ExamplesIn LabVIEW for Education, select Help»Find Examples and then select Toolkits and Modules»NXT Robotics in the NI Example Finder window. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create. You can also refer to the labview\examples\NXT Robotics directory for example VIs that demonstrate common tasks using the LabVIEW Module for LEGO MINDSTORMS.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
NoteUnlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX either from the Start screen or from within NI Launcher.
Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8 DesktopStart screenRight-click application and select Pin to Start
Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.For more information about NI support for Windows 8, visit ni.com/windows8.Important InformationCopyright© 2009–2015 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks.LEGO and MINDSTORMS are trademarks of the LEGO Group. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]