NI ELVISmx 4.0.1 Driver Win32Eng NI ELVISmx设备驱动软件4.0.1下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI ELVISmx 4.0.1 Driver Win32Eng NI ELVISmx设备驱动软件4.0.1下载
NI ELVISmx
NI-ELVISmx为使用NI ELVIS II和NI ELVIS II +以及myDAQ学生数据采集设备的客户提供支持。
NI-ELVISmx是支持NI ELVIS II、NI ELVIS II +和myDAQ设备的驱动软件。NI-ELVISmx包括NI ELVISmx Instrument Launcher、LabVIEW Express VI和编程NI ELVIS II/II+硬件的SignalExpress步骤。
Win32Eng
4.0.1
文件大小: 781757008 字节 (745.54 MB)
修改日期: 2019-06-25 03:08
MD5: 264bccf9803c8aa8674dd5b15f170384（官方正确）
SHA1: 29f7df6594bced9cda78516986fb58b385879395
SHA256: 2dc731c1f9ee00afd9fdef4b4dc9837ebcc4c280837f140a93aa75f0e900c865
CRC32: d46bfef5
百度网盘和NI官方下载地址：
NI ELVISmx 4.0.1 ReadmeOctober 2008This file contains important information about the NI ELVISmx software and is organized into the following sections:
[*]System Requirements
[*]What's New
[*]Using the Instruments in Manual Mode
[*]Documentation
[*]Known Issues
Refer to ni.com/academic/ni_elvis for the latest information about NI ELVISmx. To download the Introduction to NI ELVIS course document and example VIs, go to ni.com/info and enter elviscourseware.System RequirementsYou must have LabVIEW 8.2 or later and NI-DAQmx 8.7.2 or later installed to use NI ELVISmx 4.0.1 or later. NI ELVISmx 4.0.1 installs NI-DAQmx 8.7.2 by default.Note: Because several of the NI ELVISmx instruments run the device at maximum speed, NI ELVIS II devices must be used with Hi-Speed USB interfaces.What's NewNI ELVISmx 4.0.1 includes the following new features:
[*]NI ELVISmx Instrument Launcher and soft-front panel instruments
[*]Express VI support for LabVIEW 8.2, LabVIEW 8.5, and LabVIEW 8.6
[*]Support for SignalExpress 2.0, SignalExpress 2.5, and SignalExpress 3.0
[*]Integration with NI Multisim 10.1. You can now use NI ELVISmx instruments in NI Multisim to simulate data, acquire data from hardware, and compare simulated and acquired data.
[*]Support for NI ELVIS II hardware. The original NI ELVIS hardware is not supported. If you are unsure which version you have, "NI ELVIS II" is labeled on the prototyping board for NI ELVIS II. The original NI ELVIS is labeled "NI ELVIS" on its prototyping board.
Using the Instruments in Manual ModeThe Variable Power Supplies and Function Generator can be set to Manual mode or Software mode by using their associated Soft Front Panel Instruments, Express VIs or SignalExpress Steps. In Manual mode, the knobs on the NI ELVIS II Benchtop Workstation control the instrument outputs.DocumentationThe following list describes the documentation that installs with NI ELVISmx:
[*]Where to Start with NI ELVIS II—This document includes important installation and configuration instructions you should read before using the NI ELVISmx software and NI ELVIS II hardware.
[*]NI ELVIS II User Manual—This user manual provides more detailed information about the NI ELVIS II hardware, including specifications and safety information.
[*]NI ELVISmx Help—This help file provides information about the soft front panel (SFP) instruments and the LabVIEW Express VIs that you may need while using the software.
[*]LabVIEW SignalExpress Help—This help file contains instructions for designing measurement projects using the NI ELVISmx steps in SignalExpress.
[*]Using NI ELVISmx Instruments in NI Multisim—This help file explains how to use NI ELVISmx instruments in NI Multisim to simulate data, acquire data from hardware, and compare simulated and acquired data.
To download the latest NI ELVISmx documentation, refer to ni.com/manuals.Known Issues
[*]The NI ELVIS II device must be plugged into the system and powered on before launching the NI ELVISmx Soft Front Panel Instruments, Express VIs and SignalExpress steps in order for it to be recognized by the software. If the device is plugged in after the software is launched, close the software application and relaunch it.
[*]The DMM, Impedance Analyzer, 2 Wire and 3 Wire software instruments read calibration data from the EEPROM of the NI ELVIS II device when they are launched. This action reserves the device, and therefore, will generate a resource conflict error if any other instruments are running. To run one of these instruments while any other instrument is running, launch it before starting any other instruments.
[*]In Manual mode, the Function Generator only supports outputting a sine wave and does not support modulation. To route the output of the Function Generator to the BNC connector when in Manual mode, the "Signal Route" control must configured prior to configuring Manual mode.
[*]The Variable Power Supply and Function Generator Manual control knobs provide some overrange in hardware, and therefore, can be set to slightly larger values than what the software allows.
[*]When running the NI ELVISmx Express VIs continuously in a loop, wire the Stop input of the Express VI to the Stop control of the loop for optimal performance.
© 2003—2008 National Instruments Corporation. All rights reserved.National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section at ni.com/legal for more information about National Instruments trademarks.PatentsFor patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.
页:
[1]