NI-Industrial Communications for DeviceNet 20.0 Driver Win32Eng NI-DNet工业通信软件驱动程序20.0下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Industrial Communications for DeviceNet 20.0 Driver Win32Eng NI-DNet工业通信软件驱动程序20.0下载
NI DeviceNet工业通信软件
NI-Industrial Communications for DeviceNet可帮助您配置和控制DeviceNet网络上DeviceNet设备。
NI-Industrial Communications for DeviceNet是一种驱动程序软件，为您使用DeviceNet接口设备、C系列DeviceNet接口模块和PXI DeviceNet接口模块提供所需的支持。它包含丰富的LabVIEW VI和属性库，因此您可以为兼容的硬件设备创建自定义的DeviceNet应用程序。
Win32Eng
20.0
文件大小: 678537216 字节 (647.10 MB)
修改日期: 2020-07-16 15:15
MD5: 003da6e712a3f3bf72d1c610db99d5a2（官方正确）
SHA1: f8528b346046de7343e1cebd57e3a1cb7d87b037
SHA256: 109ccb3670364fa2ffead276b865eb384b1b57a342f2d81811e5f60ae4abbcc6
CRC32: 83f6e3c9
百度网盘与NI官方下载地址：
NI-Industrial Communications for DeviceNet 20.0 ReadmeJuly 2020This file contains important information about NI-Industrial Communications for DeviceNet for Windows and LabVIEW Real-Time environment, including new features, installation and upgrade issues, compatibility issues, and a partial list of bug fixes.Caution The NI-Industrial Communications for DeviceNet 20.0 software or later requires the NI-9882 module with the updated firmware. When you upgrade your software to the 20.0 version or later, check the software version of the media shipped with your NI-9882 module. If the version is not 20.0 or later, or you are not sure of the version number, NI recommends that you update the firmware. Otherwise, when you use NI-Industrial Communications for DeviceNet 20.0 or later, firmware images corrupt or get mismatched. Ensure that you have appropriate hardware and software installed and complete the following task to update the firmware.
[*]Double-click Firmware_Update_Instructions.html in the <National Instruments>\NI-IndCom for DeviceNet directory and follow the instructions to use a LabVIEW example project to update the firmware.
OverviewSystem RequirementsInstallation InstructionsProduct Security and Critical UpdatesNew Features and ChangesBug FixesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsCompatibility with NI-DNET 1.xUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1NI-Industrial Communications for DeviceNet Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021Legal InformationOverviewThe NI-Industrial Communications for DeviceNet software provides the DeviceNet driver and VIs for you to configure and control DeviceNet devices on a DeviceNet network and to communicate with FPGA targets.System RequirementsSupported Operating SystemsNI-Industrial Communications for DeviceNet supports the following operating systems:
[*]Windows 10/8.11/7 SP12
[*]Windows Server 2012 R2 (64-bit)1
[*]Windows Server 2008 R2 SP1 (64-bit)2
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.NoteRefer to NI-Industrial Communications for DeviceNet Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.NoteIn 2016 NI-Industrial Communications for DeviceNet dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI-Industrial Communications for DeviceNet 20.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-Industrial Communications for DeviceNet 20.0 to an unsupported OS. Additionally, after installing NI-Industrial Communications for DeviceNet 20.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.NoteSupport for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.NoteUpgrading Windows 8 to Windows 8.1 with the NI-Industrial Communications for DeviceNet software installed might result in device configuration information damage and ostensible disconnection between devices. NI recommends that you reinstall the NI-Industrial Communications for DeviceNet software after upgrading the operating system.Supported Hardware and SoftwareRefer to KB 6CCA8MEG, Supported Hardware and Software for NI-Industrial Communications for DeviceNet, for a complete list of NI hardware and software supported by each version of the NI-Industrial Communications for DeviceNet.The maximum number of devices you can connect to a DeviceNet interface depends on the electrical characteristics of the devices on the network. If all of the devices on the network meet the DeviceNet specifications, you may connect 64 devices to the network.CautionThe NI-Industrial Communications for DeviceNet software does not support the previous generation of the DeviceNet hardware products such as NI PCI-DNET, NI PCMCIA-DNET, and NI PXI-8461/D. Those products require an NI-DNET 1.x driver.Installation InstructionsNI automates software installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.Installing the Software on the RT TargetComplete the following steps to install the NI-Industrial Communications for DeviceNet software on the RT target in NI Measurement & Automation Explorer (MAX):
[*]Expand Remote Systems in the configuration tree and expand the RT target.
[*]Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.
[*]If the RT target is a CompactRIO controller, select the Custom software installation option.
[*]Select the NI-IndCom for DeviceNet item in the feature list and click the Next button.
[*]Follow the remaining installation instructions until installation is complete.
Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.New Features and ChangesDeviceNet 20.0
[*]Added support for LabVIEW 2020 (32-bit) and LabVIEW 2020 Real-Time Module.
DeviceNet 19.0
[*]Added support for LabVIEW 2019 (32-bit) and LabVIEW 2019 Real-Time Module.
DeviceNet 18.0
[*]Added support for LabVIEW 2018 (32-bit) and LabVIEW 2018 Real-Time Module.
[*]Removed support for FPGA VIs.
[*]Added support for cRIO-904x/905x.
[*]Updated the firmware upgrade tool for NI 9882.
DeviceNet 17.0
[*]Added support for LabVIEW 2017 (32-bit) and LabVIEW 2017 Real-Time Module.
DeviceNet 16.0
[*]Added support for LabVIEW 2016 (32-bit) and LabVIEW 2016 Real-Time Module.
[*]Added support for cRIO-9032/9035 (Sync)/9037/9039 (Sync).
DeviceNet 15.0
[*]Added support for LabVIEW 2015 (32-bit) and LabVIEW 2015 Real-Time Module.
[*]Added support for sbRIO-9607/9627 and RMC-9697.
DeviceNet 14.5
[*]Added support for LabVIEW 2014 SP1(32-bit) and LabVIEW 2014 Real-Time Module.
[*]Added support for cRIO-9030/9031/9033/9035/9036/9039/9063/9064/9065/9066/9067.
DeviceNet 2.3
[*]Added FPGA VIs to operate the NI 9882 modules on the NI-RIO targets.
[*]Added support for cRIO-9068.
[*]Added support for LabVIEW 2013 (32-bit) and LabVIEW 2013 Real-Time Module.
DeviceNet 2.2
[*]Added slave support for NI 9882, PCI-8532, and PXI-8532.
[*]Added VIs for reading and writing the raw CAN frames.
[*]Added an example VI for monitoring and analyzing DeviceNet packets.
[*]Added support for LabVIEW 2012 (32-bit) and LabVIEW 2012 Real-Time Module.
DeviceNet 2.1
[*]Added support for NI 9882 1-Port DeviceNet Module for CompactRIO.
[*]Added NI-DNET 1.x compatible LabVIEW VIs.
DeviceNet 2.0.2
[*]Added support for LabVIEW 2011 (32-bit) and LabVIEW 2011 Real-Time Module.
DeviceNet 2.0.1
[*]Added support for LabVIEW 2010 (32-bit) and LabVIEW 2010 Real-Time Module.
DeviceNet 2.0
[*]Supported NI DeviceNet hardware: PCI-8532 and PXI-8532.
[*]Supported LabVIEW 2009 (32-bit) and LabVIEW 2009 Real-Time Module.
Bug FixesThe following items are the IDs and titles of a subset of issues fixed in NI-Industrial Communications for DeviceNet 14.5. This is not an exhaustive list of issues fixed in the current version of NI-Industrial Communications for DeviceNet. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
IDFixed Issue
504396The maximum IO length for Poll, COS and Cyclic should be 255 instead of 240
The following items are the IDs and titles of a subset of issues fixed in NI-Industrial Communications for DeviceNet 2.1. This is not an exhaustive list of issues fixed in the current version of NI-Industrial Communications for DeviceNet. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
IDFixed Issue
198387Explicit messaging function block help does not explain how to write attributes
185016PCI/PXI 8532 boards manual lacks hardware specifications section
The following items are the IDs and titles of a subset of issues fixed in NI-Industrial Communications for DeviceNet 2.0.2. This is not an exhaustive list of issues fixed in the current version of NI-Industrial Communications for DeviceNet. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
IDFixed Issue
288931DeviceNet deployment executable fails to execute on a machine without LabVIEW
Accessing the HelpRefer to the NI-Industrial Communications for DeviceNet Help, accessible by selecting Help»NI-Industrial Communications for DeviceNet in LabVIEW, for information about using the NI-Industrial Communications for DeviceNet software.Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the NI-Industrial Communications for DeviceNet software are in the labview\examples\NI-Industrial Communications for DeviceNet folder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.Compatibility with NI-DNET 1.xNI-Industrial Communications for DeviceNet 2.1 or later is not an update for NI-DNET 1.x and the two products can be installed on the same system side by side. DeviceNet 2.1 or later provides NI-DNET 1.x compatible VIs, so the application using NI-DNET 1.x VIs can work with DeviceNet 2.1 or later on PCI-8532, PXI-8532 and NI 9882 with very limited code change.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Software Platform Bundle, refer to Customize and Automate Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, NI Measurement & Automation Explorer (MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.NI-Industrial Communications for DeviceNet Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021NI-Industrial Communications for DeviceNet will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
LabVIEWlifecycle
LabWindows/CVIcvi_lifecycle
Measurement Studiomstudiolifecycle
TestStandtslcp
DIAdemddlcp
SignalExpressselcp
VeriStandnivslifecycle
Legal InformationCopyright© 2009–2020 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.Members of the NI Alliance Partner Program are business entities independent from NI and have no agency, partnership, or joint-venture relationship with NI.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.375166H-01
页:
[1]