NI-DMM 16.0 Driver Win32/64Eng NI数字万用表驱动程序16.0下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-DMM 16.0 Driver Win32/64Eng NI数字万用表驱动程序16.0下载
NI-DMM
NI-DMM支持使用NI数字万用表的客户。
NI-DMM是与所有NI可编程数字万用表(DMM)进行通信必需的NI仪器驱动程序。NI-DMM是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，而且包含了交互式软件前面板和示例。
Win32/64Eng/Jpn
16.0
文件大小: 1805614984 字节 (1.68 GB)
修改日期: 2016-07-12 02:06
MD5: 4e84441df778958faa4b5bd84e356498（官方正确）
SHA1: 7313836dae1404d23271936359326655d7f69e37
SHA256: 3d784ad125e15da9e1471ecec6a0ff94720d18350888c290707922b7aa07ae79
CRC32: 131f47d0
百度网盘与NI官方下载地址：
NI-DMM ReadmeVersion 16.0Thank you for using NI-DMM. This file contains important information about NI-DMM and is organized into the following sections:New FeaturesSupported HardwareSystem RequirementsInstalled Software, Documentation, and ExamplesExecutableDocumentationAccessing VIs and FunctionsNI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003Product Security and Critical UpdatesDriver Version Naming ChangesUninstalling/Modifying NI-DMMBehavior ChangesKnown IssuesBug FixesAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1Legal Information
New FeaturesNI-DMM 16.0 includes the following new features:
[*]Support for LabVIEW 2016 (32- and 64-bit).
NI-DMM 15.2 includes the following new features:
[*]Support for the NI PXIe-4080, NI PXIe-4081, and NI PXIe-4082.
NI-DMM 15.1 includes the following new features:
[*]Support for LabVIEW 2015 (32- and 64-bit).
[*]Support for debugging an NI-DMM device while in use by another application, by monitoring or controlling the device in the NI-DMM Soft Front Panel.
NoteNI-DMM 15.1 Soft Front Panel no longer supports IVI device simulation.
NI-DMM 14.0 includes the following new features:
[*]Support for LabVIEW 2014 (32- and 64-bit).
NI-DMM 3.1 includes the following new features:
[*]Support for LabVIEW 2013 (32- and 64-bit).
NI-DMM 3.0.6 includes the following new features:
[*]Support for LabVIEW 2012 (32- and 64-bit).
NI-DMM 3.0.5 includes the following new features:
[*]Support for LabVIEW 2011 (32- and 64-bit).
NI-DMM 3.0.4 includes the following bug fixes:
[*]Fix related to code not generating in the Japanese versions of LabVIEW when the NI-DMM/Switch Express VI was used with switch devices (ID 276993).
[*]Fix related to a loading issue with the NI-DMM/Switch Express VI in LabVIEW 2010 (64-bit) (ID 246480).
NI-DMM 3.0.3 includes the following new features:
[*]Support for LabVIEW 2010 (32- and 64-bit).
[*]Fix related to a custom installer built on a 32-bit OS using LabVIEW, LabWindows™/CVI™, or NI TestStand does not deploy NI-DMM or its dependent user applications on a 64-bit OS (ID 228650).
NI-DMM 3.0.2 includes the following new features:
[*]Updated the external calibration procedure to accommodate a hardware change on newer NI 407x devices. NI-DMM 3.0.2 or later is required for external calibration beginning with NI PCI-4070 revision 189380G-01, NI PXI-4070 revision 191485G-01, NI PXI-4071 revision 191485J-02, and NI PXI-4072 revision 191485F-03.
[*]Fixed an issue with NI 407x devices that caused an internal hardware error when taking measurements with autorange (ID 196451).
NI-DMM 3.0.1 includes the following bug fix:
[*]Fix related to offsets in AC current measurements for 407x devices (ID 135829).
NI-DMM 3.0 includes the following new features:
[*]Introduction of the niDMM_GetErrorMessage function.
[*]Support for LabVIEW 2009 (32-bit) and LabVIEW 2009 (64-bit).
[*]Support for temperature measurements in the NI-DMM/Switch Express VI.
[*]Support for temperature measurements in the DMM Soft Front Panel.
[*]Support for 64-bit user mode.
[*]C examples rewritten in ANSI C and makefile support added for 64-bit targets.
NI-DMM 2.9 includes the following new features:
[*]Support for LabVIEW 8.6.
[*]Support for temperature measurements.
[*]Japanese localization for driver, LabVIEW API, and documentation.
[*]New behavior: Error and self test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) may experience a change in behavior.
[*]New behavior: Simulation now has increased realism. Timing and error reporting are more representative of an actual device.
[*]Reset Device button in MAX has improved functionality. If you have selected an NI 4065/407x in the Devices and Interfaces configuration tree, the Reset Device button aborts any ongoing acquisitions before resetting the device to factory default.
[*]New behavior: If you have selected an NI 4065/407x in MAX, the Test Panels button in MAX will launch the NI-DMM Soft Front Panel.
[*]Temperature has been added to function.ctl. If this type def is being used in the prototype for a TestStand step, the step prototype will need to be reloaded before the sequence can be executed.
Supported HardwareNI-DMM 16.0 and later supports the following digital multi-meters:
[*]NI PXIe-4080
[*]NI PXIe-4081
[*]NI PXIe-4082
[*]NI PXI-4072
[*]NI PXI-4071
[*]NI PXI-4070
[*]NI PCI-4070
[*]NI PXI-4065
[*]NI PCIe-4065
[*]NI PCI-4065
[*]NI USB-4065
[*]NI PXI-4022
NoteMXI Express and MXI-4 are supported on Windows 8.1/8.0/7/Vista/XP, but MXI-3 is supported on only Windows XP.Device-specific information about these modules is included in the NI DMM Help.System RequirementsSupported Operating Systems
[*]Windows 10/8.1/7 SP1 (32- and 64-bit)
[*]Windows Server 2012 R2 (64-bit)
[*]Windows Server 2008 R2 (64-bit)
NoteNI-DMM 3.0.4 and later does not support Windows Server non-R2 editions.NI recommends that you have the most recent service pack for your operating system installed. Windows XP/Vista users must use NI-DMM 15.2 or earlier.Supported Real-Time Operating EnvironmentsNI-DMM 16.0 and later supports the following real-time operating environments:
[*]LabVIEW Real-Time Module
[*]LabWindows™/CVI™ Real-Time Module
Minimum System Requirements
[*]Processor—2.53 GHz Intel Core 2 Duo processor or equivalent
[*]RAM—1 GB, 800 MHz DDR2 RAM
[*]A screen resolution of 1,024 x 768
[*]Windows 10/8.1/7, with all available critical updates and service packs
Recommended System
[*]Processor—2.3 GHz quad-core Intel Core i7 or equivalent
[*]RAM—4 GB, dual-channel 1600 MHz DDR3 RAM
[*]Windows 10/8.1/7, with all available critical updates and service packs
Application Development Environments (ADEs)Note:You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI or Microsoft Visual Studio®, before installing NI-DMM. To add support for ADEs installed after installing NI-DMM, modify your NI-DMM installation or launch the NI-DMM installer again.
[*]NI LabVIEW 2013 SP1, 2014 SP1, 2015 SP1, or 2016
[*]LabVIEW 2013 SP1 and later supports the NI PXI-4065, NI PXI-4070, NI PXI-4071, NI PXI-4072, NI PXIe-4080, NI PXIe-4081, and NI PXIe-4082 only.
[*]LabVIEW Real-Time Module 2013 SP1, 2014 SP1, 2015
[*]LabVIEW Real-Time Module 2013 SP1 and later supports the NI PXI-4065, NI PXI-4070, NI PXI-4071, NI PXI-4072, NI PXIe-4080, NI PXIe-4081, and NI PXIe-4082 only.
[*]LabWindows®/CVI® 2009 or later
[*]LabWindows/CVI Real-Time Module 2010 or later
[*]LabWindows/CVI Real-Time Module 2010 SP1 and later supports the NI PXI-4065, NI PXI-4070, NI PXI-4071, NI PXI-4072, NI PXIe-4080, NI PXIe-4081, NI PXIe-4082 devices only.
[*]Microsoft Visual C++ (MSVC) 6.0 or later
[*]Microsoft Visual Basic 6.0
[*]If you are running your application on an RT target, 128 MB of memory or more is required.
Installed Software, Documentation, and Examples
[*]<NIDocDir> is an alias for the following National Instruments file folder location: Users\Public\Documents\National Instruments
[*]<IVIROOTDIR32> is an alias for the following National Instruments file folder location:
[*](32-bit) Program Files\IVI Foundation\IVI\
[*](64-bit): Program Files (x86)\IVI Foundation\IVI\
Note$(IVIROOTDIR32) is configured as an environment variable on the target system.
If you upgraded an installation of IVI, your files may be located in the following location:
[*](32-bit) Program Files\IVI\
[*](64-bit) Program Files (x86)\IVI\
[*]<IVIROOTDIR64> is an alias for the following National Instruments file folder location:
[*](64-bit) Program Files\IVI Foundation\IVI\Note$(IVIROOTDIR64) is configured as an environment variable on the target system.
File Locations
ItemInstalled Location
NI-DMM<IVIROOTDIR32>\Drivers\niDMM
NI-DMM Function Panel<IVIROOTDIR32>\Drivers\niDMM\nidmm.fp
NI-DMM Examples<NIDocDir>\niDMM\Examples
NI-DMM Header files<IVIROOTDIR32>\Include
NI-DMM Import Library files (32-bit)<IVIROOTDIR32>\Lib
NI-DMM Import Library files (64-bit)<IVIROOTDIR32>\Lib_x64
NI-DMM DLL (32-bit)<IVIROOTDIR32>\Bin
Additional File Locations for 64-bit Operating Systems
ItemInstalled Location
NI-DMM Function Panel<IVIROOTDIR64>\Drivers\niDMM\nidmm.fp
NI-DMM Header files<IVIROOTDIR64>\Include
NI-DMM Import Library files (64-bit)<IVIROOTDIR64>\Lib_x64
NI-DMM DLL (64-bit)<IVIROOTDIR64>\Bin
ExecutableSelect Start»All Programs»National Instruments»NI-DMM»NI-DMM Soft Front Panel to launch the NI-DMM Soft Front Panel.DocumentationMost documentation is available at Start»All Programs»National Instruments»NI-DMM»Documentation. The documentation set is composed of the following documents.
DocumentFormatDescription
NI Digital Multimeters HelpHTML/Windows HelpContains primary help content for NI-DMM. The help is an HTML version of a traditional user manual that includes the following information:
[*]An introduction to multimeter fundamentals
[*]Hardware device information
[*]How to get started with application development
[*]A complete reference for all NI-DMM programming functions and VIs
NI Digital Multimeters Getting Started GuidePrinted and PDFContains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
Specifications for your devicePrinted and PDFLists technical specifications for your device.
Calibration Procedures for your devicePDFContains calibration instructions for your device.
NI-DMM ReadmeHTML (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
Introduction to NI-DMMHTMLContains information about driver documentation, examples, connecting to your instrument, configuring instrument settings, and known issues.
NI-DMM IVI Compliance DocumentTXTContains information about IVI compliance.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.To use the .NET API, you must install the the .NET class libraries or the .NET Wrapper in addition to the NI device driver. For information on versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.NoteTo view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/reader.Accessing VIs and FunctionsTo access the LabVIEW sample projects and templates from the New Project dialog, select Sample Projects in the left pane and navigate to the project that best matches your application requirements.NI–DMM palette VIs are available from the Functions»Measurement I/O»NI–DMM palette.NI–DMM functions are available in LabWindows/CVI from the Instrument menu. To load the NI–DMM function panel (.fp), select Instrument»Load, and navigate to IVI\Drivers\niDMM\niDMM.fp.Finding ExamplesIn LabVIEW, you can use the NI Example Finder to search or browse examples. NI–DMM examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–DMM examples) and their descriptions:
[*]Click the Browse tab to locate examples by task at Hardware Input and Output»Modular Instruments»NI–DMM or by directory structure at instr»niDMM.
[*]Click the Search tab to search all installed examples by keyword. For example, search for "DMM" to locate all NI-DMM examples.
The NI Example Finder is also available in LabWindows/CVI by selecting Help»Find Examples.You can also access all the installed NI–DMM examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»NI-DMM»Examples.Examples also are available online that demonstrate NI-DMM functionality. Refer to ni.com/examples for these examples and for more information.NI-DMM 16.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003With this release, NI-DMM 16.0 drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-DMM 16.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-DMM 16.0 to an unsupported OS. Additionally, after installing NI-DMM 16.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.Driver Version Naming ChangesNI-DMM versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI-DMM 14.0 is the version released with LabVIEW 2014. The last version released under the old numbering scheme is NI-DMM 3.1. The first version released under the new numbering scheme is NI-DMM 14.0.Uninstalling/Modifying NI-DMMFor Windows 7, complete the following steps:
[*]Launch the Control Panel by selecting Start»Control Panel.
[*]Double-click Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall/Change button.
[*]Select NI-DMM 16.0 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 10/8.1, complete the following steps:
[*]Right-click on the Start button.
[*]Select Control Panel.
[*]Select Programs» Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall button.
[*]Select NI-SWITCH 16.0 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
As part of the NI–DMM installation, the following software is installed. To completely remove the NI–DMM installation from your system, you must also remove all of the following products:
[*]NI-DMM Runtime 16.0 and later
[*]NI IVI Compliance Package 16.0
[*]NI Measurement & Automation Explorer 16.0
[*]NI-DAQmx 15.1.1 (optional for NI PXIe-4080, NI PXIe-4081, and NI PXIe-4082)
[*]Traditional NI-DAQ 7.4.4 (optional)
[*]NI-VISA 15.5
[*]NI I/O Trace 15.0 (optional)
[*]NI System Configuration 15.0
CautionSeveral of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent upon, a message warns you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.NoteDo not attempt to uninstall by manually deleting files.Obsolete VIs/FunctionsThe following VIs/functions are obsolete, and no maintenance is provided for these VIs/functions:
Obsolete
niDMM Calculate Accuracy
niDMM Clear Error Info
niDMM Get Error Info
niDMM Configure Auto Zero Mode (LabVIEW only)
niDMM Configure Measurement
niDMM Configure Sample Delay Mode
niDMM Error Query
niDMM Get Error (LabVIEW only)
niDMM Error Message (LabWindows/CVI only)
niDMM Convert Resolution (To Absolute)
niDMM Convert Resolution (To Digits)
niDMM Format Measurements Resolution (Absolute)
niDMM Format Measurements Resolution (Digits)
NoteObsolete VIs/functions may cause a warning popup in existing LabVIEW DMM applications after NI-DMM 16.0 is installed.Behavior ChangesThe following items are changes in behavior for 15.2.
[*]Express VIs are not supported with NI PXIe-408x hardware. For more information on differences between NI PXI-407x hardware and NI PXIe-408x hardware, visit ni.com/info and enter Info Code exbgsi.
[*]The following triggers have been renamed in NI-DMM 15.2.
NI-DMM C/CVI/VB Trigger Naming Changes
Former nameNew name
NIDMM_VAL_TTL0NIDMM_VAL_PXI_TRIG0
NIDMM_VAL_TTL1NIDMM_VAL_PXI_TRIG1
NIDMM_VAL_TTL2NIDMM_VAL_PXI_TRIG2
NIDMM_VAL_TTL3NIDMM_VAL_PXI_TRIG3
NIDMM_VAL_TTL4NIDMM_VAL_PXI_TRIG4
NIDMM_VAL_TTL5NIDMM_VAL_PXI_TRIG5
NIDMM_VAL_TLL6NIDMM_VAL_PXI_TRIG6
NIDMM_VAL_TTL7NIDMM_VAL_PXI_TRIG7
NIDMM_VAL_LBR_TRIG_0NIDMM_VAL_LBR_TRIG0
NIDMM_VAL_LBR_TRIG_1NIDMM_VAL_LBR_TRIG1
NIDMM_VAL_AUX_TRIG_1NIDMM_VAL_AUX_TRIG1
Known IssuesYou can access the software and documentation known issues list online. Refer to the NI-DMM 16.0 Known Issues at ni.com/info and enter the Info Code exq32j for an up-to-date list of known issues in NI-DMM 16.0.Bug FixesThe following items are changes in NI-DMM 15.2 from NI-DMM 14.0.
IDFixed Issue
507445Fixed an issue in NI-DMM 14.0 where the Capacitance, Susceptance, Resistance, and Reactance attributes had incorrect IDs and wrote to the incorrect attributes in the NI-DMM property node. The attributes have been fixed with the correct IDs and now write to the correct attribute. The Susceptance and Resistance attributes were incorrectly set as integer types, producing an IVI_ERROR_TYPES_DO_NOT_MATCH error. The attributes have been fixed to doubles.
There are no changes in NI-DMM 14.0 from NI-DMM 3.1.The following items are changes in NI-DMM 3.0.6 from NI-DMM 3.0.5.
IDFixed Issue
305548Fixed an issue in NI-DMM 3.0.5 where you could not change the calibration password on the NI 4070/4071/4072.
The following items are changes in NI-DMM 3.0.4 from NI-DMM 3.0.3.
IDFixed Issue
276993Fixed an issue in NI-DMM 3.0.3 where code was not generating in the Japanese versions of LabVIEW when the NI-DMM/Switch Express VI was used with switch devices.
246480Fixed an issue where the NI-DMM/Switch Express VI did not load in LabVIEW 2010 (64-bit).
The following items are changes in NI-DMM 3.0.3 from NI-DMM 3.0.2.
IDFixed Issue
228650Fixed an issue in which a custom installer built on a 32-bit OS using LabVIEW, LabWindows/CVI, or NI TestStand does not deploy NI-DMM or its dependent user applications on a 64-bit OS.
The following items are changes in NI-DMM 3.0.2 from NI-DMM 3.0.1.
IDFixed Issue
196451Fixed an issue with NI 407x devices that caused an internal hardware error when taking measurements with autorange.
The following items are changes in NI-DMM 3.0.1 from NI-DMM 3.0.
IDFixed Issue
135829Fixed an issue where NI 407x devices exhibited larger than normal offsets in AC current measurements when the Auto Zero property/attribute was set to Auto or Off after performing a self-calibration or external calibration.
The following items are changes in NI-DMM 3.0 from NI-DMM 2.9.
IDFixed Issue
112297Fixed an issue where, when taking LC measurements, the backlog returned from the niDMM_FetchMultipoint function returned the number of points sampled prior to averaging rather than the number of points available.
116484Fixed an issue where, if the error message was too long, the buffer returned by the niDMM_error_message function was not null-terminated. Now, the buffer returned by the niDMM_error_message function is always null-terminated.
131868Fixed an issue where niDMM_ConfigureRTDCustom and niDMM_ConfigureThermistorCustom set the C value to the user-specified value from the B parameter rather than from the C parameter.
157349If you upgraded to NI-DAQmx 8.9.0 or later after installing NI-DMM 2.9, then installing NI-DMM 3.0 or later will again enable switch devices to be used in the NI-DMM/Switch Express VI.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher. For more information about NI support for Windows 8.x, visit ni.com/windows8.Legal InformationCopyright© 2007–2016 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.376310B-01
页:
[1]