NI-HSDIO 1.3 Driver Win32Eng NI高速数字输入输出仪器驱动程序1.3
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-HSDIO 1.3 Driver Win32Eng NI高速数字输入输出仪器驱动程序1.3
NI-HSDIO
NI-HSDIO为使用NI PXI数字波形仪器或数字波形设备的客户提供支持。
NI-HSDIO是与数字波形硬件进行通信的NI仪器驱动程序，用于执行高速DIO(HSDIO)任务。该驱动程序软件包含基于IVI准则的灵活API、完整的硬件支持文档，以及配置和测试实用程序。
Win32Eng
1.3
文件大小: 79991232 字节 (76.29 MB)
修改日期: 2010-04-25 02:59
MD5: bafe6fb10fb2478cd93b19bd9811d36a（官方正确）
SHA1: cc59a3f912dee1cc6dc20f7000dcc3788db0efb4
SHA256: c886cc116a2ddf07029231b93d71e4c10a11f458fab6920d5b9e15426ff8e5b5
CRC32: 84dbed20
百度网盘与NI官方下载地址：
NI-HSDIO Instrument Driver ReadmeIVI™, CVI™, LabVIEW™, Measurement Studio™, National Instruments™, ni.com™, NI-DAQ™, NI-VISA™, and RTSI™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.(c) 2003—2004 National Instruments Corporation. All rights reserved.Version 1.3Thank you for using NI-HSDIO for Windows 2000/NT 4.0/XP. This file contains important information regarding NI-HSDIO and is organized into the following sections:
[*]New Features
[*]Supported Hardware
[*]System Requirements
[*]Installed File Names and Locations
[*]Software Files
[*]Documentation
[*]Uninstalling/Modifying NI-HSDIO
[*]Known Issues
New FeaturesNI-HSDIO 1.3 includes the following new features:
[*]Support for multirecord acquisitions
[*]Support for configurable data width
[*]Support for NI 656X hardware, including configuring it for use in DDR mode and selectable terminal configuration
[*]Support for configuring trigger impedance
NI-HSDIO 1.2.1 includes the following new features:
[*]Support for the LabVIEW Real-Time Module 7.1. For more information about using NI-HSDIO with the LabVIEW Real-Time Module, launch the NI Digital Waveform Generator Help and select Programming»Getting Started with NI-HSDIO»Using NI-HSDIO with LabVIEW»Considerations for using the LabVIEW Real-Time Module.
[*]Initializing a generation or acquisition session now closes any other sessions open in the same process, starting a fresh session. If a calibration session is open, all new sessions will return an error.
[*]Removed support for exporting triggers and events other than the Onboard Reference Clock (PCI devices only) to PXI trigger line 7/RTSI 7, although you can still use this channel to import triggers and events.
NI-HSDIO 1.2 includes the following new features:
[*]Support for LabVIEW 7.1
[*]Acquisition and Generation Express VIs for NI-HSDIO (LabVIEW 7.1 only).
[*]Support for NI 654X products
[*]Support for multiple script triggers
[*]Support for multiple markers
[*]Support for performing pattern match triggering on a specified edge
[*]Additional functions and VIs for voltage calibration
[*]Modified fetching behavior
[*]Removed support for saving HWS files as a waveform data type then reading them back in U32 format
Supported HardwareNI-HSDIO supports the following NI digital waveform generator/analyzers:
[*]NI PXI/PCI-6541
[*]NI PXI/PCI-6542
[*]NI PXI/PCI-6551
[*]NI PXI/PCI-6552
[*]NI PXI-6561
[*]NI PXI-6562
Device-specific information about these modules is included in the NI Digital Waveform Generator/Analyzer Help.System RequirementsMinimum System Requirements
[*]Processor: Pentium 200 MHz or equivalent
[*]RAM: 64 MB
[*]Microsoft Internet Explorer 5.5 or later
[*]A screen resolution of 800×600 with 256 colors (required for the NI Script Editor)
Recommended System
[*]Processor: Pentium III/Celeron 600 MHz or equivalent
[*]RAM: 256 MB
[*]Microsoft Internet Explorer 5.5 or later
[*]One of the following operating systems:
[*]Windows 2000
[*]Windows NT 4.0 Service Pack 6a
[*]Windows XP
[*]One of the following application development environments (ADEs):
[*]LabVIEW 7.0 or later (Express VIs for NI-HSDIO LabVIEW 7.1 or later only)
[*]LabVIEW Real-Time Module 7.1
[*]LabWindowsTM/CVITM 6.0 or later
[*]Microsoft Visual C++ (MSVC) 6.0 or later
[*]If you are running your application on an RT target, 64 MB of memory or more is recommended.
Installed File Names and LocationsSoftware FilesMost NI-HSDIO files are installed in the <;Program Files>\IVI\Drivers\niHSDIO\ directory.The niHSDIO folder contains the documentation, examples, license files, and FPGA files for NI-HSDIO and the associated hardware.The niHSDIO\Examples\ directory contains links to all of the examples.LabVIEW examples are installed in the <LabVIEW>\examples\instr\niHSDIO\ directory unless you select a different location during installation.LabWindows™/CVI™ examples are installed in the <CVI>\samples\niHSDIO\ directory.C examples are installed in the <;Program Files>\IVI\Drivers\niHSDIO\Examples\c\ directory.The Script Editor is installed in the <National Instruments>/Script Editor directory.Product DocumentationThe product documentation is available at Start» Programs»National Instruments»NI-HSDIO»Documentation. Visit ni.com/manuals to find the latest versions of product documentation. The documentation for NI-HSDIO and NIDigital Waveform Generator/Analyzer modules include the following items:
[*]NI Digital Waveform Generator/Analyzer Getting Started Guide–Explains how to install, configure, and test a National Instruments digital waveform generator/analyzer.
[*]NI Digital Waveform Generator/Analyzer Help–Contains instructions for opening, configuring, initiating signal generation, and closing the session. Also, contains information about programming and fundamentals.
[*]Specifications document for your device–Contains specifications for the capabilities and valid operating conditions of your NI device.
NoteTo view the specifications, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.Uninstalling/Modifying the Instrument DriverFor Windows 2000/NT/XP, complete the following steps:
[*]Launch the Control Panel by selecting Start»Settings.
[*]Double-click Add/Remove Programs.
[*]Select National Instruments Software.
[*]Click Change or Modify.
[*]Select NI-HSDIO 1.3.
[*]Click Uninstall.
As part of the NI-HSDIO installation, the following list of software was installed. To completely remove NI-HSDIO from your system, you must remove all of these packages also.
[*]NI IVI Compliance Package 2.1.2
[*]NI LabVIEW Run-Time Engine 7.0
[*]NI Measurement & Automation Explorer 3.1
[*]NI-DAQ 7.3
[*]NI-SWITCH 2.3
[*]NI-VISA 3.1
CautionSeveral of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.Known Issues
[*]If you would like to run the .mak file in Visual Studio 7.1 or later, you will receive an error prompts you when you convert the .mak file to the current Visual C++ project format. To avoid this problem, complete the following steps:
[*]Create an empty C++ console project.
[*]Add the C file.
[*]Open the project properties and configure the following settings:
[*]Configuration Properties»C/C++»Additional Include Directories: $(VXIPNPPATH)\winnt\include
[*]Configuration Properties»Linker»General»Additional Library Directories: "$(VXIPNPPTH)\winnt\lib\msc"
[*]Configuration Properties»Linker»Input: niHSDIO.lib
[*]Review the specifications document at Start» Programs»National Instruments»NI-HSDIO»Documentation to ensure that the clock and trigger signals you connect to the instrument meet the amplitude, jitter, and duty cycle requirements of your device.
页:
[1]