NI-Industrial Controller Device Drivers 15.5 Win32Eng NI工业控制器设备驱动程序15.5
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Industrial Controller Device Drivers 15.5 Win32Eng NI工业控制器设备驱动程序15.5
NI-Industrial Controller Device Drivers
NI工业控制器设备驱动程序软件为客户使用NI工业控制器提供支持。
NI工业控制器设备驱动程序是用于配置和编程工业控制器的驱动程序软件。该软件还可用于控制工业控制器的数字I/O。除了LabVIEW、LabVIEW Real-Time模块或NI自动化检测视觉生成器之外，您还必须安装此驱动程序才能开始编程工业控制器。
Win32Eng
15.5
文件大小: 1547776672 字节 (1.44 GB)
修改日期: 2016-04-01 22:20
MD5: 4313fdf78332f54ed8aa5e4edea50b46（官方正确）
SHA1: 055f5007e2a4852bdd44f608c2d23f0e1fa155bd
SHA256: 34e6f6f6c7dfb4236bd4166191aa93279be850a85678cc225fa117a4f3d4dfdd
CRC32: a29e8d36
百度网盘与NI官方下载地址：
NI Industrial Controller Device Drivers Release NotesFebruary 2016This file contains important information about National Instruments Industrial Controller Device Drivers, including installation instructions, new features, fixed issues, and known issues.Overview
System Requirements
NI Application Software Support
Installation Instructions
Automating the Installation of NI Products
Known Issues
Documentation
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal InformationOverviewNI Industrial Controller Device Drivers allows you to configure Industrial Controller devices and control their digital I/O. This release supports the following hardware:
[*]IC-3120
[*]IC-3121
[*]IC-3173
Refer to the NI Industrial Controller website at ni.com/industrial-controller for the latest information about NI Industrial Controller Device Drivers.System RequirementsThe development computer must meet the following requirements to run NI Industrial Controller Device Drivers:
ProcessorPentium 4 1 GHz or equivalent
Memory512 MB RAM
Display1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended
Free Hard Disk Space1.5 GB
Operating System
[*]Windows 10
[*]Windows 8.1 (32- and 64-bit)
[*]Windows 7 SP1 (32- and 64-bit)
[*]Windows Vista SP1 (32- and 64-bit)
[*]Windows XP SP3 (32-bit)
[*]Windows Server 2012 R2 (64-bit)
[*]Windows Server 2008 R2 SP2 (64-bit)
[*]Windows Server 2003 R2 SP2 (32-bit)
NI Application and Driver Software SupportThe following table lists the NI application and driver software versions, including service packs, supported by the NI Industrial Controller Device Drivers. The installer specifically allows side-by-side installations of NI Industrial Controller Device Drivers for each of the supported versions of LabVIEW, enabling you to use the NI Industrial Controller Device Drivers with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Industrial Controller Device Drivers.
NI Application Software or Driver SoftwareVersions Supported by NI Industrial Controller Device Drivers
NI LabVIEW2014, 2015
NI LabVIEW Real-Time Module2014, 2015
NI LabVIEW FPGA Module2014, 2015
NI Vision Development Module2015 SP1 or later
NI Vision Acquisition SoftwareFebruary 2016 or later
NI Vision Builder for Automated Inspection2015 or later
Installation InstructionsComplete the following steps to install NI Industrial Controller Device Drivers:Note: You must have administrator access to install NI Industrial Controller Device Drivers.
[*]Insert the NI Industrial Controller Device Drivers installation media.
[*]If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
[*]Follow the onscreen instructions.
NI Industrial Controllers Device Drivers integrate with NI Measurement & Automation Explorer (MAX), the National Instruments utility for configuring and testing your measurement and automation system. The NI MAX icon appears on your desktop after you install NI Industrial Controller Device Drivers.Installing from an NI Software Suite or NI Product BundleIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Known Issues
[*]The Vision RIO API VIs may load as broken if a system has NI-IMAQ I/O 15.5 (from Vision Acquisition Software February 2016) and NI Industrial Controller Device Drivers installed with LabVIEW support, and you uninstall the NI Industrial Controller Device Drivers. Reinstalling NI Industrial Controller Device Drivers will restore the Vision RIO API VIs to a runnable state.
[*]On real-time industrial controllers, serial configuration is not available in MAX. The port can be switched between RS-485 and RS-232 in the BIOS, and programmatic configuration is available in Vision Builder AI and LabVIEW.
[*]System temperature monitoring is only available for real-time IC-3173 targets.
DocumentationDocumentation is installed onto your hard drive with NI Industrial Controller Device Drivers. To view the documentation, select Start»All Programs»National Instruments»Industrial Controller and then select the driver documentation. You can also navigate to <Users>\Public\Public Documents\National Instruments.Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation.Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.NoteNI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch NI MAX either from the Apps view or from within NI Launcher.Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.1 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.1 DesktopStart screenRight-click application and select Pin to Start
Windows 8.1 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, click the down arrow on the bottom left of the screen.For more information about NI support for Windows 8.1, visit ni.com/windows8.NI Industrial Controller Device Drivers Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016NI Industrial Controller Device Drivers will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI Industrial Controller Device Drivers that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows™/CVI™cvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle
Legal InformationCopyright© 2016 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.375780A-01
页:
[1]