NI-WLAN Test Toolkit 18.0 Win32/64Eng NI无线局域网测试工具包18.0
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-WLAN Test Toolkit 18.0 Win32/64Eng NI无线局域网测试工具包18.0
WLAN测试工具包
WLAN测试工具包为WLAN 802.11a/b/g/j/p/n/af/ah/ac/ax测试应用提供了信号生成和分析功能。
WLAN测试工具包是一款应用软件，旨在扩展NI RF仪器用于WLAN 802.11信号生成和分析的功能。该软件可以通过误差矢量幅度(EVM)、频谱发射屏蔽(SEM)、发射功率(TXP)等符合标准的物理层测量，对802.11a/b/g/j/p/n/af/ah/ac/ax信号进行分析。WLAN测试工具包具有灵活的配置，可进行减损处理，提供每用户测量结果报告以及MIMO和分集配置，因而可支持多站点信号。借助WLAN测试工具包，您可通过交互式软面板快速轻松地执行和调试测量，创建和回放开放的未锁定波形，并结合更高性能的API加快自动化测试的速度。
Win32/64Eng
18.0
文件大小: 1875107840 字节 (1.75 GB)
修改日期: 2018-10-11 14:31
MD5: ac0094a8c0e798fbd214ba1b3c5cc321（官方正确）
SHA1: 06df362e19f19fe6a873db88c8f712bf9a5d20a4
SHA256: 560d01469549cd60fab72bd30f2953220f0079678039ffc5aeed7612d6147335
CRC32: 3823cc5a
百度网盘与NI官方下载地址：
NI WLAN Toolkit 18.0 ReadmeOctober 2018Thank you for using NI WLAN Toolkit. Refer to the following product-specific readme files:
[*]NI WLAN Analysis Toolkit Readme
[*]NI WLAN Generation Toolkit Readme
Legal InformationCopyright© 2009–2018 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, s5.5 toring in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
NI WLAN Analysis Toolkit 18.0 ReadmeOctober 2018This file contains important information about the NI WLAN Analysis Toolkit and is organized into the following sections:New FeaturesSupported HardwareSystem RequirementsInstalled Software, Documentation, and ExamplesExecutableDocumentationAccessing VIs and FunctionsFinding ExamplesNI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003Product Security and Critical UpdatesToolkit Version Naming ChangesUninstalling/Modifying NI WLAN Analysis ToolkitBehavior ChangesKnown IssuesBug FixesAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1Legal InformationNew FeaturesNI WLAN Analysis Toolkit 18.0 includes the following new features:
[*]Support for midambles in 802.11ax
[*]Support for LabVIEW 2018 (32-bit and 64-bit)
[*]Estimation and compensation for frequency selective Tx IQ impairments
NI WLAN Analysis Toolkit 17.5 includes the following new features:
[*]Support for UL MU-MIMO for 802.11ax
[*]Support for 1x HE-LTF in 802.11ax
[*]Support for channel frequency response interpolation in 1x/2x HE-LTF for 802.11ax
[*]Support for combined signal demodulation for 802.11ax up to 4x4 MIMO SU PPDU
[*]Support for full preamble CFO estimation for 802.11ax
[*]Added channel frequency response smoothing
[*]Estimation and compensation for Rx timing skew impairment
[*]Estimation and compensation for Rx IQ mismatch for 802.11ax
[*]Support for preamble puncturing in 802.11ax
NI WLAN Analysis Toolkit 17.0 includes the following new features:
[*]Support for IEEE Standard P802.11ax/D1.2
[*]Support for all PPDUs of 802.11ax: Single-User (SU), Multi-User (MU), Extended Range SU and Trigger-Based PPDUs
[*]Support for all channel bandwidths of 802.11ax: 20 MHz, 40 MHz, 80 MHz, 80+80 MHz and 160 MHz
[*]Support for Downlink OFDMA and MU-MIMO for 802.11ax
[*]Support for Uplink OFDMA for 802.11ax
[*]Support for 8X8 MIMO for 802.11ax
[*]Support for MCS 0 to 11 for 802.11ax
[*]Support for noise compensation for EVM for the OFDM Demod measurement
[*]Support for LabVIEW 2017 (32- and 64-bit)
NI WLAN Analysis Toolkit 16.0 includes the following new features:
[*]Support for LabVIEW 2016
[*]Support for 8x8 MIMO for IEEE Standard 802.11ac-2013 in NI WLAN Analysis Soft Front Panel
[*]Support for querying power spectrum (dBm/RBW) trace in spectral mask measurement
[*]Support for querying single EVM result per stream of an 80+80 MHz, 802.11ac signal in NI WLAN Analysis Soft Front Panel
[*]Support for querying single TxP result per channel of an 80+80 MHz, 802.11ac signal in API and NI WLAN Analysis Soft Front Panel
Supported HardwareThe following list shows the supported hardware products:
[*]NI PXIe-5665
[*]NI PXIe-5663
[*]NI PXIe-5663E
[*]NI PXIe-5644R
[*]NI PXIe-5645R
[*]NI PXIe-5646R
[*]NI PXIe-5668R
[*]NI PXIe-5840
[*]NI PXIe-5820
System RequirementsSupported Operating SystemsNI WLAN Analysis Toolkit 18.0 supports the following operating systems:
[*]Windows 10/8.1/7 SP12 (32-bit and 64-bit)
[*]Windows Embedded Standard 7 SP12 (32-bit and 64-bit)
[*]Windows Server 2012 R21 (64-bit)
[*]Windows Server 2008 R2 SP12 (64-bit)
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.NoteThe NI WLAN Analysis Toolkit 18.0 and later does not support Windows Server non-R2 editions.NI recommends that you have the most recent service pack for your operating system installed.Minimum Requirements
[*]Processor—Pentium IV or equivalent
[*]Free hard drive space—1 GB
[*]RAM—2 GB
[*]Microsoft Internet Explorer 8 or later
[*]Supported RF vector signal analyzer with minimum 256 MB of onboard memory
Recommended System
[*]Free hard drive space—2 GB
[*]RAM—4 GB
Required Software
[*]NI-RFSA 15.0 or later
[*]NI LabVIEW Modulation Toolkit 15.0 or later
[*]PXI Platform Services 14.0
Application Development Environments (ADEs)NoteYou should install ADEs, such as NI LabVIEW, NI LabWindows™/CVI™ or Microsoft Visual Studio®, before installing NI WLAN Analysis Toolkit. To add support for ADEs installed after installing NI WLAN Analysis Toolkit, modify your NI WLAN Analysis Toolkit installation or launch the NI WLAN Analysis Toolkit installer again.
[*]LabVIEW 2015 SP1, 2016, 2017 SP1, or 2018
[*]LabWindows/CVI 8.5.1 or later
[*]TestStand 4.2.0 for TestStand sequences
Installed Software, Documentation, and ExamplesInstalled Software
[*]<NIDIR> is an alias for the following National Instruments file folder location:
[*](32-bit OS) Program Files\National Instruments
[*](64-bit OS) Program Files (x86)\National Instruments for 32-bit programs and Program Files\National Instruments for 64-bit programs
[*]<NIDocDir> is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
[*]<LabVIEW> is an alias for the following National Instruments file folder location:
[*]Windows 10/Windows 8.1/Windows 7: <NIDIR>\LabVIEW <year>
[*]<SYSDIR> is an alias for the following file folder location:
[*](32-bit OS) windows\system32
[*](64-bit OS) windows\SysWow64 for 32-bit programs and windows\system32 for 64-bit programs
File Locations
ItemInstalled Location
WLAN Analysis Soft Front Panel<NIDIR>\WLAN Toolkit\WLAN Analysis Soft Front Panel.exe
DLL<SYSDIR>
WLAN Calibration Utility<NIDIR>\WLAN Toolkit\Calibration Utility\WLAN Calibration Utility.exe
LabVIEW
VIs<LabVIEW>\vi.lib\RF Toolkits\WLAN\
Examples<LabVIEW>\examples\RF Toolkits\WLAN\
LabWindows/CVI
Header Files<NIDIR>\Shared\CVI\Include
Static Libraries<NIDIR>\Shared\CVI\bin\msvc
.lfp/.sub Files<NIDIR>\Shared\CVI\bin
Examples<NIDocDir>\CVI\samples\WLAN
C
Header Files<NIDIR>\Shared\ExternalCompilerSupport\C\include
Import Library<NIDIR>\Shared\ExternalCompilerSupport\C\lib32\msvc
Examples<NIDocDir>\WLAN Toolkit\Examples\C\Analysis
TestStand
Examples<NIDIR>\WLAN Toolkit\TestStand
ExecutableSelect Start»All Programs»National Instruments»NI WLAN Analysis Toolkit»WLAN Analysis Soft Front Panel to launch the NI WLAN Analysis Toolkit Soft Front Panel.DocumentationDocumentation for the NI WLAN Analysis Toolkit is located at Start»All Programs»National Instruments»NI WLAN Analysis Toolkit»WLAN Analysis Toolkit Documentation. The documentation set is composed of the following documents.
DocumentFormatDescription
NI WLAN Analysis Toolkit HelpHTML/Windows HelpInformation about NI WLAN Analysis Toolkit. The help is an HTML version of a traditional user manual that includes the following information:
[*]An introduction to NI WLAN Analysis Toolkit
[*]A complete reference for all NI WLAN Analysis Toolkit programming functions and VIs
NI WLAN Analysis Toolkit ReadmeHTML (this document)Information about supported hardware and operating systems, new features, fixed issues, and legal notices.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.Accessing VIs and FunctionsNI WLAN Analysis palette VIs are available from the Functions»RF Communications»WLAN»Analysis palette.NI WLAN Analysis functions are available in LabWindows/CVI from the Library menu.Finding ExamplesYou can also access all the installed NI WLAN Analysis examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»WLAN Analysis Toolkit»WLAN Analysis Toolkit Examples.Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.NI WLAN Analysis Toolkit 18.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003With this release, NI WLAN Analysis Toolkit 18.0 drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI WLAN Analysis Toolkit 18.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI WLAN Analysis Toolkit 18.0 to an unsupported OS. Additionally, after installing NI WLAN Analysis Toolkit 18.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2017, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.Toolkit Version Naming ChangesNI WLAN Analysis Toolkit versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the toolkit was released and the most recent software version the toolkit was designed to work with. Toolkit versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI WLAN Analysis Toolkit 17.0 is the version released with LabVIEW 2017. The last version released under the old numbering scheme is NI WLAN Analysis Toolkit 4.1. The first version released under the new numbering scheme is NI WLAN Analysis Toolkit 14.0.Uninstalling/Modifying NI WLAN Analysis ToolkitFor Windows 7, complete the following steps:
[*]Launch the Control Panel by selecting Start»Control Panel.
[*]Double-click Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall/Change button.
[*]Select NI WLAN Analysis Toolkit 18.0 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 10/8.1, complete the following steps:
[*]Right-click on the Start screen.
[*]Select Control Panel.
[*]Select Programs» Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall button.
[*]Select NI WLAN Analysis Toolkit 18.0 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
Behavior ChangesThe following are the behavior changes in NI WLAN Analysis Toolkit 18.0 from NI WLAN Analysis Toolkit 17.5:
[*]The behavior of LO Frequency Offset Mode property with value Auto has been changed to address frequencies less than 2.4 GHz.
The following are the behavior changes in NI WLAN Analysis Toolkit 17.5 from NI WLAN Analysis Toolkit 17.0:
[*]The default value of the OFDM CFR Interpolation Enabled property, which is applicable for 1x/2x HE-LTF in IEEE 802.11ax, is changed to True.
[*]The OFDM Low Pass Filter Enabled property is bypassed for 802.11ac 80 MHz when you set the OFDM oversampling factor to -1 and the waveform IQ rate is equal to the IQ Recommended Sampling Rate (S/s).
[*]The OFDM Oversampling Factor property is applicable for 802.11a/g, 802.11j, 802.11p, 802.11n, and 802.11ac standards.
[*]The 802.11ac 80 MHz signal will be processed at 120 MS/s irrespective of the incoming IQ rate when the OFDM oversampling factor is -1.
[*]The low pass filter coefficient generation is disabled if input IQ rate falls within 1 Hz of the IQ recommended sampling rate (S/s).
The following are the behavior changes in NI WLAN Analysis Toolkit 17.0 from NI WLAN Analysis Toolkit 16.0:
[*]The default value of the LO Sharing Enabled property is changed to False.
[*]The default value of the OFDM Common Clock Source Enabled property has been changed to True.
[*]The NI-RFSA Downconverter Loop Bandwidth property is set to Narrow for NI 5646R.
The following are the behavior changes in NI WLAN Analysis Toolkit 14.5 from NI WLAN Analysis Toolkit 14.0:
[*]AMPM properties are obsolete in toolkit version 14.5.
Known IssuesYou can access the software and documentation known issues list online. Refer to the NI WLAN Analysis Toolkit 18.0 Known Issues List at ni.com for an up-to-date list of known issues in NI WLAN Analysis Toolkit 18.0.Bug FixesThe following items are changes in WLAN Toolkit 18.0 from WLAN Toolkit 17.5.
Bug IDFixed Issue
707639Fixed an issue where the carrier frequency leakage results were incorrect for 802.11ax extended range SU and/or when the HE-LTF Size is 2x or 1x.
457302Fixed an issue where error in the estimates of Tx IQ impariments were more for higher timing skew in 802.11 ax 40M SU PPDU.
The following items are changes in WLAN Toolkit 17.5 from WLAN Toolkit 17.0.1.
Bug IDFixed Issue
681254Fixed an issue where the niWLANA RFSA Measure VI calls the niTClk Synchronize TClk VI, when TClk synchronization is enabled for multiple NI PXIe-5840 devices.
676629Fixed an issue where channel estimate was not corrected for amplitude distortion when the OFDM Amplitude Tracking Enabled property was set to True.
680970Fixed an issue where the result of the OFDM Detected PSDU Length result was incorrect for 802.11ax MU signals when dual carrier modulation (DCM) was enabled only for a few or all users.
661309Fixed an issue where errors in the estimated sample clock offset were high for 802.11ax 40 MHz signals when the OFDM Common Clock Source Enabled property was set to False and IQ impairments compensation is enabled.
660725Fixed an issue where errors in quadrature skew estimates were high in the presence of timing skew when the IQ mismatch model is Rx .
561529Fixed an issue where the IQ impairments compensation was failing for 5x5 and 6x6 802.11ac MIMO signals.
647016Fixed an issue where the preamble, pilots, and data method for CFO estimation was incorrect for trigger-based PPDU in 802.11ax when the OFDM measurement start location was non zero.
680707Fixed an issue where the EVM reported was incorrect in the presence of ignored symbols when you set the Combined Signal Demodulation Enabled property to True.
687193Fixed an issue where spectral measurements were incorrect on the NI 5665 with 25 MHz DDC.
639337Fixed an issue where quadrature skew compensation was incorrect for the MIMO OFDM standards.
The following items are changes in WLAN Toolkit 17.0.1 from WLAN Toolkit 17.0.
Bug IDFixed Issue
652843Fixed an issue where slight degradation in EVMs was observed for SISO signals when you set the OFDM Channel Estimation Method property to Preamble and Data for less than 20 symbols. This is in comparison with previous versions of the toolkit.
The following items are changes in WLAN Toolkit 17.0 from WLAN Toolkit 16.0.
Bug IDFixed Issue
632242Fixed an issue where there was a small error (<0.1 dB) in computation of Channel EVM on 802.11ac and 802.11n MIMO signals.
616590Fixed an issue where incorrect generator matrices were used for LPDC encoding for the following cases for 802.11n and 802.11ac standards:
[*]LDPC codeword block length of 648 bits with coding rate of 1/2 or 5/6
[*]LDPC codeword block length of 1296 bits with coding rate of 2/3 or 5/6
635715Fixed an issue where in a 64-bit process, changing center frequency caused transmit spectrum mask test to give incorrect results.
578886Fixed an issue in the transmit spectrum mask margin vector results of 802.11ac 80+80 MHz combined spectrum mask, there was no frequency offset at the center of the spectrum when the separation between carrier frequencies of the frequency segments was 160 MHz or 240 MHz.
654463Fixed an issue where incorrect EVM numbers were reported for lower number of symbols for MIMO signals, when you set the OFDM Channel Estimation Method property to Preamble and Data.
The following items are changes in WLAN Analysis Toolkit 15.5 from WLAN Analysis Toolkit 15.0.
Bug IDFixed Issue
576440Fixed an issue where an error message was not displayed when the Reference Data Constellation input was empty and the Combined Signal Demodulation was enabled.
576138Fixed an error where the user-defined mask creation was incorrect if the start and end offset values were not equidistant from the center.
572279Fixed an error where some payload properties were not getting saved in the TDMS file when the PPDU type was MU PPDU.
572274Fixed an error where the spectral mask violation result was incorrect for 802.11ac, 80+80 MHz signal.
569961Fixed an error where the power spectrum computation was incorrect when IQ In Port was used, and the IQ In Port Carrier Frequency was non-zero.
528989Fixed an error where the niWLANA RFSA Auto Range VI retained a higher burst length value even after it encountered a lower sized burst when the VI was called again.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.How to Use NI Software with Microsoft Windows 8.1When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.Legal InformationCopyright© 2009–2018 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
374870H-01
NI WLAN Generation Toolkit 18.0 ReadmeOctober 2018This file contains important information about the NI WLAN Generation Toolkit and is organized into the following sections:New FeaturesSupported HardwareSystem RequirementsInstalled Software, Documentation, and ExamplesExecutableDocumentationAccessing VIs and FunctionsFinding ExamplesNI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003Product Security and Critical UpdatesToolkit Version Naming ChangesUninstalling/Modifying NI WLAN Generation ToolkitBehavior ChangesKnown IssuesBug FixesAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Using NI Software with Microsoft Windows 8.1Legal InformationNew FeaturesNI WLAN Generation Toolkit 18.0 includes the following new features:
[*]Support for multiuser configuration using RU allocation values for 802.11ax
[*]Support for midambles in 802.11ax
[*]Support for configuring Idle interval independent of RF blanking
[*]Support for LabVIEW 2018 (32-bit and 64-bit)
[*]Added power CCDF trace on Generation Soft Front Panel
NI WLAN Generation Toolkit 17.5 includes the following new features:
[*]Support for UL MU-MIMO for 802.11ax
[*]Support for 1x HE-LTF in 802.11ax
[*]Support configuration of nominal packet padding for 802.11ax
[*]Added trigger frame common parameters in 802.11ax as configurable parameters for trigger-based PPDU generation
[*]Support for preamble puncturing in 802.11ax
NI WLAN Generation Toolkit 17.0 includes the following new features:
[*]Support for IEEE Standard P802.11ax/D1.2
[*]Support for all PPDUs of 802.11ax: Single-User (SU), Multi-User (MU), Extended Range SU and Trigger-Based PPDUs
[*]Support for all channel bandwidths of 802.11ax: 20 MHz, 40 MHz, 80 MHz, 80+80 MHz and 160 MHz
[*]Support for Downlink OFDMA and MU-MIMO for 802.11ax
[*]Support for Uplink OFDMA for 802.11ax
[*]Support for 8X8 MIMO for 802.11ax
[*]Support for MCS 0 to 11 for 802.11ax
[*]Support for Trigger Frame generation
[*]Support for LabVIEW 2017 (32- and 64-bit)
NI WLAN Generation Toolkit 16.0 includes the following new features:
[*]Support for LabVIEW 2016 (32- and 64-bit)
[*]Support for 8x8 MIMO for IEEE Standard 802.11ac-2013 in the NI WLAN Generation Soft Front Panel
Supported HardwareThe following list shows the supported hardware products:
[*]NI PXIe-5673
[*]NI PXIe-5673E
[*]NI PXIe-5644R
[*]NI PXIe-5645R
[*]NI PXIe-5646R
[*]NI PXIe-5840
[*]NI PXIe-5820
System RequirementsSupported Operating SystemsNI WLAN Generation Toolkit 18.0 supports the following operating systems:
[*]Windows 10/8.11/7 SP12 (32-bit and 64-bit)
[*]Windows Embedded Standard 7 SP12 (32-bit and 64-bit)
[*]Windows Server 2012 R21 (64-bit)
[*]Windows Server 2008 R2 SP12 (64-bit)
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.NoteThe NI WLAN Generation Toolkit 18.0 and later does not support Windows Server non-R2 editions.NI recommends that you have the most recent service pack for your operating system installed.Minimum Requirements
[*]Processor—Pentium IV or equivalent
[*]Free hard drive space—1 GB
[*]RAM—2 GB
[*]Microsoft Internet Explorer 8 or later
[*]Supported RF vector signal generator with minimum 256 MB of arbitrary waveform generator onboard memory
Recommended System
[*]Free hard drive space—2 GB
[*]RAM—4 GB
Required Software
[*]NI-RFSG 15.0 or later
[*]NI LabVIEW Modulation Toolkit 15.0 or later
Application Development Environments (ADEs)NoteYou should install ADEs, such as NI LabVIEW, NI LabWindows™/CVI™ or Microsoft Visual Studio®, before installing NI WLAN Generation Toolkit. To add support for ADEs installed after installing NI WLAN Generation Toolkit, modify your NI WLAN Generation Toolkit installation or launch the NI WLAN Generation Toolkit installer again.
[*]LabVIEW 2015 SP1, 2016, 2017 SP1 or 2018
[*]LabWindows/CVI 8.5.1 or later
[*]TestStand 4.2.0 for TestStand sequences
Installed Software, Documentation, and ExamplesInstalled Software
[*]<NIDIR> is an alias for the following National Instruments file folder location:
[*](32-bit OS) Program Files\National Instruments
[*](64-bit OS) Program Files (x86)\National Instruments for 32-bit programs and Program Files\National Instruments for 64-bit programs
[*]<NIDocDir> is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
[*]<LabVIEW> is an alias for the following National Instruments file folder location:
[*]Windows 10/Windows 8.1/Windows 7: <NIDIR>\LabVIEW <year>
[*]<SYSDIR> is an alias for the following file folder location:
[*](32-bit OS) windows\system32
[*](64-bit OS) windows\SysWow64 for 32-bit programs and windows\system32 for 64-bit programs
File Locations
ItemInstalled Location
WLAN Generation Soft Front Panel<NIDIR>\WLAN Toolkit\WLAN Generation Soft Front Panel.exe
DLL<SYSDIR>
WLAN Calibration Utility<NIDIR>\WLAN Toolkit\Calibration Utility\WLAN Calibration Utility.exe
LabVIEW
VIs<LabVIEW>\vi.lib\RF Toolkits\WLAN\
Examples<LabVIEW>\examples\RF Toolkits\WLAN\
LabWindows/CVI
Header Files<NIDIR>\Shared\CVI\Include
Static Libraries<NIDIR>\Shared\CVI\bin\msvc
.lfp/.sub Files<NIDIR>\Shared\CVI\bin
Examples<NIDocDir>\CVI\samples\WLAN
C
Header Files<NIDIR>\Shared\ExternalCompilerSupport\C\include
Import Library<NIDIR>\Shared\ExternalCompilerSupport\C\lib32\msvc
Examples<NIDocDir>\WLAN Toolkit\Examples\C\Samples\Generation
TestStand
Examples<NIDIR>\WLAN Toolkit\TestStand
ExecutableSelect Start»All Programs»National Instruments»NI WLAN Generation Toolkit»WLAN Generation Soft Front Panel to launch the NI WLAN Generation Toolkit Soft Front Panel.DocumentationDocumentation for the NI WLAN Generation Toolkit is located at Start»All Programs»National Instruments»NI WLAN Generation Toolkit»WLAN Generation Toolkit Documentation. The documentation set is composed of the following documents.
DocumentFormatDescription
NI WLAN Generation Toolkit HelpHTML/Windows HelpInformation about NI WLAN Generation Toolkit. The help file is an HTML version of a traditional user manual that includes the following information:
[*]An introduction to NI WLAN Generation Toolkit
[*]A complete reference for all NI WLAN Generation Toolkit programming functions and VIs
NI WLAN Generation Toolkit ReadmeHTML (this document)Information about supported hardware and operating systems, new features, fixed issues, and legal notices.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.Accessing VIs and FunctionsNI WLAN Generation palette VIs are available from the Functions»RF Communications»WLAN»Generation palette.NI WLAN Generation functions are available in LabWindows/CVI from the Library menu.Finding ExamplesYou can also access all the installed NI WLAN Generation examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»WLAN Generation Toolkit»WLAN Generation Toolkit Examples.Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.NI WLAN Generation Toolkit 18.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003With this release, NI WLAN Generation Toolkit drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI WLAN Generation Toolkit 18.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI WLAN Generation Toolkit 18.0 to an unsupported OS. Additionally, after installing NI WLAN Generation Toolkit 18.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support for 2017, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.Toolkit Version Naming ChangesNI WLAN Generation Toolkit versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the toolkit was released and the most recent software version the toolkit was designed to work with. Toolkit versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI WLAN Generation Toolkit 17.0 is the version released with LabVIEW 2017. The last version released under the old numbering scheme is NI WLAN Generation Toolkit 4.1. The first version released under the new numbering scheme is NI WLAN Generation Toolkit 14.0.Uninstalling/Modifying NI WLAN Generation ToolkitFor Windows 7, complete the following steps:
[*]Launch the Control Panel by selecting Start»Control Panel.
[*]Double-click Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall/Change button.
[*]Select NI WLAN Generation Toolkit 18.0 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 10/8.1, complete the following steps:
[*]Right-click on the Start button.
[*]Select Control Panel.
[*]Select Programs» Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall button.
[*]Select NI WLAN Generation Toolkit 18.0 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
Behavior ChangesThe following are the behavior changes in NI WLAN Generation Toolkit 18.0 from NI WLAN Generation Toolkit 17.5:
[*]The behavior of the LO Frequency Offset Mode property with value Auto has been changed to address frequencies less than 2.4 GHz.
The following are the behavior changes in NI WLAN Generation Toolkit 17.5 from NI WLAN Generation Toolkit 17.0:
[*]Application of time delay impairment has been changed to be relative among users.
The following are the behavior changes in NI WLAN Generation Toolkit 17.0 from NI WLAN Generation Toolkit 16.0:
[*]The default value of the LO Sharing Enabled property has been changed to False.
The following are the behavior changes in NI WLAN Generation Toolkit 15.0 from NI WLAN Generation Toolkit 14.5:
[*]RF blanking marker positions are written per waveform basis in TDMS.
Known IssuesYou can access the software and documentation known issues list online. Refer to the NI WLAN Generation Toolkit 18.0 Known Issues List at ni.com for an up-to-date list of known issues in NI WLAN Generation Toolkit 18.0.Bug FixesThe following items are changes in WLAN Toolkit 18.0 from WLAN Toolkit 17.5.
Bug IDFixed Issue
710003Fixed an issue where in multiframe generation of 802.11j or 802.11p standard, always fixed headroom of 12 dB is applied for the frames other than the first frame.
703693Fixed an issue where the Tx Beamforming bit in the HE-SIG-B user info of the center 26 RU in 80 MHz/160 MHz was always set to 1.
701203Fixed an issue where the number of data symbols value returned was incorrect for the standards 802.11b and 802.11g.
701134Fixed an issue where the nominal packet padding in 802.11ax was 0 for 106 RU with DCM.
700404Fixed an issue where the average power computation for headroom computation in ER SU PPDU with STBC was incorrect.
641901Fixed an issue where AWGN applied was incorrect for 802.11ax MU users with power boost factor.
517534Fixed an issue where windowing applied to the last OFDM symbol was improper in 802.11ac.
The following items are changes in WLAN Toolkit 17.5 from WLAN Toolkit 17.0.1.
Bug IDFixed Issue
687075Fixed an issue where incorrect MAC padding was applied to 802.11ax when the LDPC extra symbol segment was equal to 1.
648844Fixed an issue where the multi-user generation of trigger-based PPDU was incorrect when the number of space time streams was different across users.
688689Fixed an issue where the waveform generated for IEEE 802.11ax was incorrect when you set the STBC All Streams Enabled property set to True and Guard Interval Type property to 1/8 or 1/16.
The following items are changes in WLAN Toolkit 17.0.1 from WLAN Toolkit 17.0.
Bug IDFixed Issue
653492Fixed an issue where relative power application is incorrect for users in Trigger-based PPDU.
647010Fixed an issue where AID12 value was incorrectly configured in the generated trigger frame.
The following items are changes in WLAN Toolkit 17.0 from WLAN Toolkit 16.0.
Bug IDFixed Issue
616590Fixed an issue where incorrect generator matrices were used for LPDC encoding for the following cases for 802.11n and 802.11ac standards:
[*]LDPC codeword block length of 648 bits with coding rate of 1/2 or 5/6
[*]LDPC codeword block length of 1296 bits with coding rate of 2/3 or 5/6
The following items are changes in WLAN Toolkit 15.5 from WLAN Toolkit 15.0.
Bug IDFixed Issue
575479Fixed an issue where the value of the MU Coding bit was incorrect when the corresponding MU NSTS field value was 0 in the VHT-SIG-A field of the 802.11ac signal.
549495Fixed an issue where there was a spelling error in the name of the niWLANG RFSG Create and Download Waveforms (Multiple Channel) VI.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.How to Use NI Software with Microsoft Windows 8.1When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.Legal InformationCopyright© 2009–2018 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
374869H-01
页:
[1]