NI Circuit Design Suite 14.0 Pro Win32Eng/Ger NI电路设计套件14.0专业版
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Circuit Design Suite 14.0 Pro Win32Eng/Ger NI电路设计套件14.0专业版
Circuit Design Suite(CDS)电路设计套件
电路设计套件结合了Multisim和Ultiboard软件，为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发，提供了先进的仿真功能，可以让您清楚地了解电路在各种场景下的性能。
14.0Pro
zip
文件大小: 716561237 字节 (683.37 MB)
修改日期: 2019-06-25 02:41
MD5: 46ee74f1db1a5066e53432619eff0197（官方正确）
SHA1: 9e65781337e08b64ce4ded6ca7608e4ef8251035
SHA256: 47a8330cae50a86e5b31525ef1e05f014807d5aa0e8441824ee3f9d133be144f
CRC32: c7629a8f
exe
文件大小: 717312856 字节 (684.08 MB)
修改日期: 2015-03-27 10:23
MD5: c3fb4f9699b65ee7fb817a421d60c20d
SHA1: cd295c0ea3015b94f1c36b8534168d7a8e239c49
SHA256: 5bd697f15e14f97b9323e223640670b980e6f48dd7eec58ca77a11bb507e272e
CRC32: 443b849d
百度网盘与NI官方下载地址：
NI Circuit Design Suite 14.0 Readme for WindowsApril 2015This file contains important last-minute information about Circuit Design Suite 14.0 for Windows, including installation and compatibility issues.Refer to Getting Started with NI Circuit Design Suite for information about getting started with Circuit Design Suite. You can access this PDF from Start»All Programs»National Instruments»Circuit Design Suite 14.0»Documentation»Circuit Design Suite 14.0 Getting Started.You can also access this from the Multisim or Ultiboard Help menu.Supported Platforms
Installing Circuit Design Suite 14.0
Product Security and Critical Updates
Known Issues
Bug Fixes
New Components
Supported PlatformsTo run Circuit Design Suite 14.0, your operating system (OS) must be one of:
[*]Windows 8.1/8/7/Vista (32-bit and 64-bit).
[*]Windows XP SP3 (32-bit).
[*]Windows Server 2008 R2 (64-bit).
[*]Windows Server 2003 R2 (32-bit).
Circuit Design Suite 14.0 does not support Windows NT/Me/98/95/2000, Windows XP x64, or the Windows Server non-R2 editions.Your system must also meet or exceed the following:
[*]Pentium 4/M class microprocessor or equivalent.
[*]512 MB of memory (256 MB minimum).
[*]2 GB of free hard disk space.
[*]1024 x 768 screen resolution.
[*]To develop custom LabVIEW-based instruments for use in Multisim, LabVIEW 2013 or 2014 is required.
NI Circuit Design Suite Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016National Instruments Circuit Design Suite will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Circuit Design Suite that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about Circuit Design Suite's product life cycle, visit NI Multisim OS Support and System Requirements. The information on this page applies to Multisim and Ultiboard.Installing Circuit Design Suite 14.0Installing Multiple VersionsCircuit Design Suite 14.0 installs side-by-side with previous versions of Circuit Design Suite.Archiving Circuit Design Suite databasesNational Instruments recommends that you regularly back up the files created within the Multisim and Ultiboard components of NI Circuit Design Suite. Additionally, you should back up internal files that store user-created data, such as databases. For more information about which files to backup and where to find them, refer to the Help.UninstallingUninstalling Circuit Design Suite will not remove user data. For more information about the locations of user database and configuration files, refer to the Archiving Data Help topic.Circuit Design Suite 14.0 Updates and NotificationsNational Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during an automatic installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.xWhen you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8 DesktopStart screenRight-click application and select Pin to Start
Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.For more information about NI support for Windows 8.x, visit ni.com/windows8.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.Known IssuesLabVIEWLabVIEW functionality (LabVIEW instruments and grapher interpolation) will not work if the installation path uses characters that are not native to the "Language for non-Unicode programs" setting, available by selecting Start»Control Panel»Regional and Language Options and selecting the Advanced tab. In the Vista OS, use the "Current language for non-Unicode programs:" setting in the Administrative tab. LabVIEW functionality works for Unicode characters that are native to this setting.Windows VistaYou cannot install Circuit Design Suite 14.0 on Windows Vista Starter edition.Circuit Design SuiteMultisim and Ultiboard leak GDI resource handles when used over extended periods of time, eventually leading to unpredictable user interface behavior and crashes. This is an issue with MFC applications running on Windows XP SP2 and Windows Server 2003. For more information and workarounds, refer to KB 4JREGSXL:Multisim or Ultiboard Leaking GDI Resource Handles.Bug FixesThe following is a subset of the issues fixed since the last release of Circuit Design Suite.
Multisim ( 61 )
Bug IDDescription
518929Update components sometimes do not detect ELVISmx instruments components from an ELVIS schematic.
517825Pasting a Title Block will not preserve the field values on multi-page sheet.
514757Net names with special internal character $ is being allowed to be created, which may cause issues with the netlist.
515526Importing a .cir file sometimes causes Multisim to crash.
501065Schematic wires sometimes may appear as connected but in reality are not.
509888Imported files can sometimes show a component's database location incorrectly.
479149Unable to change the value for a RLC custom part.
465428Setting a component value visible will sometimes place the RefDes away from the schematic symbol.
490625Single pin source changes do not create an undo point.
491624Modifying values on single pin sources, the SPICE netlist viewer does not get its "out of date" message.
511469Multisim sometimes does not display correctly a component's value compared to the actual value.
466171Component Wizard fails to provide all model nodes when line continuations are separated by comment lines.
506416Replacing some components by hierarchical block or subcircuit within an hierarchical block will sometimes crash Multisim.
504931Default digital graph color is difficult to see with default background.
274344Editing a component in database should modify and not create a new component.
493395SPICE model type is no longer shown in table view for basic RLC device models.
491327Undo sometimes causes inconsistency between netlist and shematic.
503533Multisim hangs when scope with normal trigger and non-default trigger value is used.
500035Cannot use exponential number format in probe parameter values.
368543Cannot save analysis settings without specifying output variables.
465372The LVM source generates incorrect negative polarity signal.
274752Oscillopscope's AC coupling generates a poor result.
479847Uninstalling 13.0.1 causes an error message next time 12.0.1 is started.
396771Checking for current sources in series will only check the first two nodes of objects defined in the netlist.
282395Attribute Device incorrectly repeats attribute Value in non-RLC components.
367605Adding a new bus line should use net name as its default bus line name.
461943Non-ideal resistor doesn't behave correctly without brackets around its model expression.
473601Using Update Components should report any broken connections.
487152When adding device parameters to analysis setup, unwanted parameters are also added.
478607Cmod S6 config files are missing internal clock pins.
490907Renaming a DGND component will not update other DGND instances.
440051Malconfigured pulse source causes an internal error during simulation.
485982Hierarchical PLD design sometimes prompts for net name collision continuosly.
488395Exponential voltage/current source has different behaviour than in PSPICE.
485448Octave AC sweep disregards logarithmic y axis.
486102Error mesasge is not clear when simulating with an expression that evaluates a divided by zero value.
403700LabVIEW microphone instrument is not able to acquire data for more than 10 sec.
274615Multisim sometimes shows a white screen for a period of time while opening a file.
424840Component Wizard allows different number of symbol pins in ANSI vs IEC.
467540Some frequency-domain analyses display seconds as the unit in the simulation status bar.
323705DMM uses 1e-9ohm series resistor to measure current, which causes convergence issues.
394799Unable to set the Xilinx path in Multisim for all users using the same computer.
443707Fourier analysis doesn't display DC component in graph.
393295Grapher does not appear to handle very small values well and rounds them off to zero.
462216The grapher's Y-axis marks do not match up with trace values.
480780AC Phase confined to and jumps between -180 and 180.
478305RefDes and Value are 'top aligned' when part is rotated in the vertical position.
269360Pole-zero analysis does not remember the analysis type setting.
465765Vertical symbol text renders horizontally when placed on schematic.
472570Triangular current source seems to only reach the peak current on the first period.
469208Unable to assign a footprint to a component with no footprints, assignment from the spreadsheet no longer works.
195405No clean way of stopping Wait for Next Output in Multisim COM API.
466133Logic Converter sometimes crashes when converting an expression to logic circuit.
465748Simulation slows down after changing parameters on the Function Generator.
465038Certain symbols from master database are reported as invalid when saving to user database.
347561The Schematic Statistic Report incorrectly counts each section of a multi-section component as a part.
456597Components with unmapped model nodes can be saved to database from the model template view without warning.
274318Placing a component with a user-created footprint will reset it to a default footprint.
456610Adding a section to a component with custom section names doesn't map all pins.
458840Copy and paste components to a new design will re-enumerate its refdeses.
459432PLD components not flagged correctly after saving to database.
Ultiboard ( 40 )
Bug IDDescription
470546Importing a DXF file sometimes does not draw the pads correctly.
507801Ultiboard sometimes places annotated components on top of existing components.
512407Moving a part around a group of parts object will cause to crash Ultiboard.
480776Toggling layer visibility for copper stack up layers with micro via placed on them may lead to Multisim crash.
268382Autorouting of buses should not have vertical trace segments.
275699Ultiroute incorrectly runs traces over a custom pad shape.
444411Non-standard fill styles do not work on copper areas that are not power planes.
495370Ultiboard crashes when follow-me router is used after changing clearance.
274648Rule precision should not round to significant digits.
320661The unit dropdown in Global options >> PCB design does not seem to get affected when units are changed from main toolbar control.
266630Fanout SMD does not work well in BGA packages.
264328Follow me router violates DRC when auto narrow traces is enabled.
275664Trace running over a via without copper ring doesn't cause connectivity error.
387633Duplicate footprint is added to the PCB when a footprint without pin is forward annotated.
443579Fiducial marks are located incorrectly when text attribute is used outside the board outline.
445863Text attribute voiding uses larger boundary box when attribute is rotated.
450179When parts are set to transparent, one can no longer see through parts in 3D view
286414NC Drill export generates incorrect file due to some decimal points in the coordinate area of the drill.
362253Attempting to change the RefDes visibility for multiple components will prompt an error message and will still allow to proceed.
440295Through-hole pad properties window is missing rounded rectangle as an option.
351243Ultiboard does not show properly when there is a μ in the component's value tag.
445866Soldermask option in via only allows none or all of the via covered.
284242Placing a hole does not have a soldermask on the hole by default.
467306Ultiboard database browser failing to refresh preview and place the selected part.
275527Net shielding field in Net Edit dialog looses focus during edit.
290268Cannot add a vertex by simply right clicking on the vertex.
461581Ultiboard's grab-and-drag layout behaviour is different than Multisim.
263206Import from Protel sometimes loses via connection.
274339Grouped components edited via spreadsheet do not undo correctly.
274629Cannot ungroup multiple group objects at once.
276402Using the delete Open Trace Ends tool sometimes removes complete connections.
274708Unknown footprint is sometimes ignored when importing from an older netlist.
324536Test point sometimes generates an invalid DRC message.
346268Changing a value in the spreadsheet view sometimes does not update the DRC result tab.
269514Incorrect pad radius will generate error message when ultiroute is run.
275732False DRC errors created when placing a net bridge underneath a component.
278859When replacing a footprint on the design, text attributes sometimes changes unexpectedly.
272973Router sometimes will not start due to an object in the silkscreen layer.
420397Cancelling the Gerber-D Import dialog will prompt a invalid warning message.
420320Net bridges do not export properly to DXF.
New ComponentsRefer to the Database section of the Multisim 14.0 Features and Improvements topic of Multisim Help for a list of new components.
Important InformationCopyright© 2006-2015 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]