NI-SCOPE 3.9.7 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.9.7
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-SCOPE 3.9.7 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.9.7
NI-SCOPE
NI-SCOPE为使用NI示波器产品的客户提供支持。
NI-SCOPE仪器驱动可帮助您进行多记录采集、连续采集、多板同步，并利用超过50个测量和分析函数以及传统示波器的功能。NI-SCOPE是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。
Win32/64Eng/Jpn
3.9.7
文件大小: 1749533568 字节 (1.63 GB)
修改日期: 2019-06-25 03:09
MD5: 3d7f940947e7d363064bffd532865639（官方正确）
SHA1: 832084b0c69ea693e64ccd5c087d54869a0a8a65
SHA256: b3e3f220907b702eb1d4e49df2b358d97cef4fd7f71e66f9763bd34efde9a235
CRC32: 4019a5c7
百度网盘与NI官方下载地址：
NI-SCOPE ReadmeVersion 3.9.7
Thank you for using NI-SCOPE. This file contains important information about NI-SCOPE and is organized into the following sections:
[*]New Features
[*]Supported Hardware
[*]System Requirements
[*]Installed File Names and Locations
[*]Updates and Notifications
[*]Installing/Uninstalling/Modifying NI-SCOPE
[*]Programming in NI-SCOPE
[*]Known Issues
[*]Bug Fixes
[*]Automating the Installation of NI Products
[*]Important Information
New Features in NI-SCOPE 3.9.7
[*]Redesigned the NI-SCOPE Soft Front Panel.
NI-SCOPE 3.9.6 adds 1MOhm support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers (new model)NI-SCOPE 3.9.4 adds support for LabVIEW 2012.NI-SCOPE 3.8.9 adds support for NI-RFSA 2.5.2.NI-SCOPE 3.8.8 adds a critical bug fix for NI 5900 digitizer.NI-SCOPE 3.8.7 adds critical bug fixes for NI 5185/5186 digitizers.NI-SCOPE 3.8.6 adds support for NI-RFSA 2.5.NI-SCOPE 3.8.5 includes the following new features:
[*]Support for LabVIEW 2011
[*]Addition of the following NI-TClk functions/VIs and attributes/properties:
LabVIEW VIC/C++ Function
niTClk Setup For Sync Pulse Sender SynchronizeniTClk_SetupForSyncPulseSenderSynchronize
niTClk Synchronize to Sync Pulse SenderniTClk_SynchronizeToSyncPulseSender
niTClk Finish Sync Pulse Sender SynchronizeniTClk_FinishSyncPulseSenderSynchronize
Labview PropertyC/C++ Attribute
NI-TClk SyncPulseSender:External Pulse SourceNITCLK_ATTR_SYNC_PULSE_SENDER_SYNC_PULSE_SOURCE
NI-SCOPE 3.8 includes the following new features:
[*]Support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers
[*]Support for including NI-SCOPE run-time in custom installers built using National Instrument Application Development Environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using National Instruments high-speed digitizers.Notes:
[*]The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX), NI LabVIEW Signal Express, or the NI-SCOPE Soft Front Panel.
[*]The run-time installer does not support upgrading from NI-SCOPE 3.6.x or earlier and NI-DAQmx 8.9.x or earlier.
[*]The run-time installer does not support the NI 5102, NI 5112, NI 5620, or NI 5621.
Supported HardwareThe following table shows which hardware products are supported under particular operating systems.
Hardware ProductWindows XPWindows Vista
32-BitWindows Vista
64-BitWindows 7
32-BitWindows 7
64-Bit
NI PXI/PCI-5102YesYesNoYesNo
NI PCMCIA/USB/AT-5102*YesNoNoNoNo
NI PXI/PCI-5105YesYesYesYesYes
NI PXI/PCI-5112YesYesNoYesNo
NI PXI/PCI-5114YesYesYesYesYes
NI PXI/PXIe/PCI-5122YesYesYesYesYes
NI PXI/PCI-5124YesYesYesYesYes
NI USB-5132/5133YesYesYesYesYes
NI PXI/PCI-5142YesYesYesYesYes
NI PXI/PCI-5152YesYesYesYesYes
NI PXI/PCI-5153YesYesYesYesYes
NI PXI/PCI-5154YesYesYesYesYes
NI PXIe-5185/5186YesYesYesYesYes
NI PXI-5620YesYesNoYesNo
NI PXI-5621YesNoNoNoNo
NI PXIe-5622YesYesYesYesYes
NI PXI-5900YesYesYesYesYes
NI PCI-5911*YesNoNoNoNo
NI PXI/PCI-5922YesYesYesYesYes
*NI PCMCIA/USB/AT-5102 and NI PCI-5911 are Legacy products.
Note: MXI-4 is supported on Windows XP and later. MXI-3 is supported only on Windows XP.Device-specific information about these modules is included in the NI High-Speed Digitizers Help.System RequirementsSupported Operating SystemsNI-SCOPE 3.9.7 and later support the following operating systems:
[*]Windows 7 (32-bit and 64-bit)
[*]Windows Vista (32-bit and 64-bit)
[*]Windows XP Service Pack 3 (32-bit)
[*]Windows Server 2003 R2 (32-bit)
[*]Windows Server 2008 R2 (64-bit)
It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-SCOPE 3.6 or earlier.Supported Real-Time Operating EnvironmentsNI-SCOPE 3.9.7 and later support the following real-time operating environments:
[*]LabVIEW Real-Time Module
[*]LabWindows™/CVI™ Real-Time Module
[*]LabVIEW Real-Time Module
[*]LabWindows™/CVI™ Real-Time Module
Minimum System Requirements
[*]Processor—Pentium III/Celeron 600 MHz or equivalent
[*]RAM—
[*]Windows XP Service Pack 3 (SP3): 128 MB
[*]Windows 7/Windows Vista: 512 MB
[*]Microsoft Internet Explorer 5.5 or later
[*]A screen resolution of 800 x 600 with 256 colors
[*]Windows 7/Vista/XP SP3, with all available critical updates and service packs
Recommended System
[*]Processor—Pentium 4 or equivalent
[*]RAM—
[*]Windows XP SP3: 256 MB
[*]Windows 7/ Windows Vista: 1 GB
[*]A screen resolution of 1024 x 768
[*]Windows 7/Vista/XP SP3, with all available critical updates and service packs
Application Development Environments (ADEs)
[*]LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 (32-bit), or 2012 (64-bit)
[*]LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1, or 2012 (NI PXI-4065, NI PXI-4070, NI PXI-4071, and NI PXI-4072 devices only)Note: Not all devices are supported by the LabVIEW Real-Time Module.
LabVIEW Real-Time Module
Supported Hardware
NI 5105
NI 5114
NI 5122
NI 5124
NI 5142
NI 5152
NI 5153
NI 5154
NI 5185
NI 5186
NI 5622
NI 5900
NI 5922
[*]LabWindows/CVI 9.0.1 or later
[*]LabWindows/CVI Real-Time Module 2009 or later (NI PXI-4065, NI PXI-4070, NI PXI-4071, and NI PXI-4072 devices only)
[*]Microsoft Visual C++ (MSVC) 6.0 or later
[*]If you are running your application on an RT target, 128 MB of memory or more is required.
Installed File Names and Locations
[*]<NIDocDir> is an alias for the following National Instruments file folder location:
[*]Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
[*]Windows 7/Vista: Users\Public\Documents\National Instruments
[*]<IVIROOTDIR32> is an alias for the following National Instruments file folder location:
[*]Windows 7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI Foundation\IVI\
[*]Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI Foundation\IVI\
Note$(IVIROOTDIR32) is configured as an environment variable on the target system.
If you upgraded an installation of IVI, your files may be located in the following location:
[*]Windows 7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI\
[*]Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI\
[*]<IVIROOTDIR64> is an alias for the following National Instruments file folder location:
[*]Windows 7 (64-bit)/Vista (64-bit): Program Files\IVI Foundation\IVI\Note$(IVIROOTDIR64) is configured as an environment variable on the target system.
File Locations
ItemInstalled Location on Windows XP/2000
and Windows 7/Vista 32-bit
NI-SCOPE<IVIROOTDIR32>\Drivers\niScope
NI-SCOPE Function Panel<IVIROOTDIR32>\Drivers\niScope\niScope.fp
NI-SCOPE Examples<NIDocDir>\niScope\Examples
NI-SCOPE Header files<IVIROOTDIR32>\Include
NI-SCOPE Import Library files (32-bit)<IVIROOTDIR32>\Lib
NI-SCOPE Import Library files (64-bit)<IVIROOTDIR32>\Lib_x64
NI-SCOPE DLL (32-bit)<IVIROOTDIR32>\Bin
NI-SCOPE Firmware UpdatersProgram Files\NI-DAQ\fpgafiles
Additional File Locations for Windows 7/Vista 64-bit
ItemInstalled Location on Windows Vista 64-bit
NI-SCOPE Function Panel<IVIROOTDIR64>\Drivers\niScope\niScope.fp
NI-SCOPE Header files<IVIROOTDIR64>\Include
NI-SCOPE Import Library files (64-bit)<IVIROOTDIR64>\Lib_x64
NI-SCOPE DLL (64-bit)<IVIROOTDIR64>\Bin
NI-SCOPE Firmware UpdatersProgram Files (x86)\NI-DAQ\fpgafiles
DocumentationMost documentation is available at Start»All Programs»National Instruments»NI-SCOPE»Documentation. The documentation set is composed of the following documents:
[*]NI High-Speed Digitizers Getting Started Guide
[*]NI High-Speed Digitizers Help
[*]Device Specifications
[*]Calibration Procedures
Note: Printed copies of device specifications are shipped with each device.Updates and NotificationsNational Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.Installing/Uninstalling/Modifying NI-SCOPEInstalling NI-SCOPEThis section provides information on installing NI-SCOPE and NI-DAQ and upgrading from previous versions of NI-SCOPE.NI-SCOPE installs NI-DAQ if it is not already installed, or if an earlier version of NI-DAQ is installed. NI-DAQ support files will be installed if you have LabVIEW or LabWindows/CVI in your system. However, the only component that NI-SCOPE needs from NI-DAQ is the device driver.Upgrading from a Previous Version of NI-SCOPEUpgrading from NI-SCOPE 1.0 and 1.1—NI-SCOPE does not install over NI-SCOPE 1.0 or 1.1. You must uninstall these versions of NI-SCOPE before installing a later version of NI-SCOPE.Upgrading from NI-SCOPE 1.5 and later—NI-SCOPE automatically uninstalls any previous version that is greater or equal to 1.5. If you have modified any old examples, these will be overwritten by the new versions.Uninstalling/Modifying NI-SCOPEFor Windows XP, complete the following steps:
[*]Launch the Control Panel by selecting Start»Control Panel.
[*]Double-click Add or Remove Programs.
[*]Select National Instruments Software.
[*]Click Change/Remove.
[*]Select NI-SCOPE 3.9.7 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows Vista, complete the following steps:
[*]Launch the Control Panel by selecting Start»Control Panel.
[*]Double-click Programs and Features.
[*]Select National Instruments Software.
[*]Click the Uninstall/Change button.
[*]Select NI-SCOPE 3.9.7 from the dialog box that appears.
[*]Click Remove to uninstall the product; click Modify to change the components that are installed.
As part of the NI–SCOPE installation, the following software is installed. To completely remove the NI-SCOPE installation from your system, you must also remove all of the following packages:
[*]NI IVI Compliance Package 4.4
[*]NI-VISA 5.0
[*]NI-DAQmx 9.1.7
[*]Traditional NI-DAQ 7.4.4
[*]NI Measurement & Automation Explorer 4.7.2
[*]NI Hierarchical Waveform Storage 1.4.9
[*]NI Spy 2.7.2
CautionSeveral of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.NoteDo not attempt to uninstall by manually deleting files.Programming in NI-SCOPENI-SCOPE provides an intuitive, full-featured interface for programming your hardware. NI-SCOPE is IVI-Scope compliant. For more information, refer to niScopeIVIComplianceDocument.txt.Software ExamplesNI-SCOPE ships with several examples for LabVIEW, LabWindows/CVI, Measurement Studio, MSVC, Visual C++, and Microsoft Visual Basic that will help you develop your software. These examples illustrate how to perform the most common operations with your hardware. To find the examples, go to Start» Programs»National Instruments»NI-SCOPE»Examples.NI-SCOPE Soft Front PanelThe NI-SCOPE Soft Front Panel (SFP) is a software oscilloscope application for NI high-speed digitizers. It has the following features:
[*]Familiar interactive user interface
[*]Robust architecture
[*]Scalar measurements
[*]Save/load waveforms
[*]Save/load configurations
[*]Low CPU usage
The NI-SCOPE SFP demonstrates some of the capabilities of NI high-speed digitizers and enables you to start using your new digitizer immediately without the need to know a programming language. The NI-SCOPE SFP is installed by default as a feature of the NI-SCOPE installation. To remove the NI-SCOPE SFP use the Add/Remove Programs option.Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-SCOPE 3.9.7.
Bug FixesThe following list contains changes from earlier versions of NI-SCOPE to NI-SCOPE 3.9.7. If you have a Bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-SCOPE.
IDFixed Issue
328318Fixed an issue that caused NI-SCOPE 3.7 to not support Visual Basic 6.
341670Fixed an issue where the NI-SCOPE Soft Front Panel does not launch under certain conditions.
336845Fixed an issue where TClk synchronization is not consistent between multiple sessions when using NI PXIe-5185 or NI PXIe-5186.
327321Fixed an issue where NI PXI-5105 returns incorrect data at low sample rates (<20 kS/s) if the channel list size is not a power of 2.
315548Fixed an issue that caused the first channel in the channel list to return incorrect data when using the niScope EX Fetch Forever VI with multiple channels. You can find this example VI at Start» Programs»National Instruments»NI-SCOPE»Examples.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information, refer to the following KnowledgeBase articles:
[*]For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important InformationCopyright© 1999–2012 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\EULAs directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksCVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
页:
[1]