NI-488.2 21.0 Driver MAC64Eng NI IEEE488.2仪器驱动21.0 苹果系统离线安装版下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-488.2 21.0 Driver MAC64Eng NI IEEE488.2仪器驱动21.0 苹果系统离线安装版下载
NI-488.2为使用NI GPIB控制器和带有GPIB端口的NI嵌入式控制器的客户提供支持。
NI-488.2仪器驱动程序包含了几个实用程序，用于应用程序开发和调试。NI-488.2包含了可自动处理所有总线管理的高级命令，因而用户就无需了解GPIB硬件产品或IEEE 488.2协议的编程细节。为了提供最大灵活性和功能，NI-488.2还包含了底层命令。
20.0版自述文件有中文版的，官方说明中也说支持中文, 日语, 英文, 韩语等，但是翻看资源包的Documents目录下，只有英文和日文的，估计仍然是只有安装界面与自述文件有中文，内在的资源仍然是没有中文化的。
NI-488.2 21.0
发布日期：
21-8-3
包含的版本:
21.0.0
受支持的操作系统:
MAC OS
语言:
English
校验和
文件大小: 70737855 字节 (67.46 MB)
修改日期: 2021-07-24 00:12
MD5: 9d534594de9919ec2bc2cfcb4fc1ada1
SHA1: 8fe7dac49ba4f8549e73d629d3d13c9a2de42fd2
SHA256: f536d1e176cae8472989ec55253f4ec5725436c3e2181c275ddb8c291f6c3d48
CRC32: 7fe09394
百度网盘下载：
请注册视觉论坛会员登录后购买附件下载查看
NI-488.2 Version 21.0 for macOS ReadmeJuly 2021This file contains important information about NI-488.2 for macOS, including installation instructions, new features, and a partial list of bugs fixed for NI-488.2.Refer to ni.com for the latest information about NI-488.2.Supported Operating SystemsNI Application Software SupportSupported HardwareInstallation InstructionsProduct Security and Critical UpdatesDriver Version Naming ChangesList of Features not Supported in macOSKnown IssuesEnhancements and Bug Fixes
[*]Version 21.0
[*]Version 19.5
[*]Version 18.5
[*]Version 18.0
[*]Version 17.0
[*]Version 15.5
[*]Version 14.1
[*]Version 3.0.1
Accessing the HelpLegal InformationSupported Operating SystemsNI-488.2 supports the following operating systems:
[*]macOS 11
[*]macOS 10.15
NI Application Software SupportThe following table lists the NI application software versions, including service packs, supported by NI-488.2.
NI Application SoftwareVersions Supported by This Release
NI LabVIEW2020, 2021
NI-VISA21.0
Note:NI I/O Trace 17.0 and later support NI-488.2 17.0. Previous versions of NI I/O Trace do not support NI-488.2 17.0 or later.Supported HardwareThe following list contains the NI hardware supported by NI-488.2 on macOS:
[*]NI PCIe-GPIB
[*]NI GPIB-USB-HS
[*]NI GPIB-USB-HS+1
[*]NI GPIB-ENET/1000
1Analyzer functionality is not supported.Installation InstructionsRefer to the NI-488.2™ for macOS Getting Started Guide on the NI-488.2 for macOS install media for installation instructions and system requirements.UninstallationTo uninstall NI-488.2 for macOS, refer to Uninstall.txt in the /Applications/National Instruments/NI-488.2 directory on the system.Product Security and Critical UpdatesVisit ni.com/security for security information about NI products. Visit ni.com/critical-updates for information about critical updates from NI.Driver Version Naming ChangesNI-488.2 versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI-488.2 for Windows 14.0 is the version of NI-488.2 released with LabVIEW 2014. The last version of NI-488.2 released under the old numbering scheme is NI-488.2 for Linux 3.2. The first version released under the new numbering scheme is NI-488.2 for Windows 14.0.List of Features not Supported in macOSThe following features of NI-488.2 supported on Windows are not supported on macOS:
[*]GPIB analyzer support
Known IssuesPower Management and Energy Saver ModesNI-488.2 for macOS does not support power management. You must disable the Energy Saver Sleep Modes or make sure all GPIB handles are offline before the system enters Sleep Mode.Upgrading NI-488.2When upgrading NI-488.2 15.5 to later versions of NI-488.2, you may see a kernel panic on the initial boot after the upgrade. Refer to KB 7J6ELBBO for more details.Installing NI-488.2 Generates a System Extension Blocked MessageStarting with release of macOS 10.13, macOS introduced a new security feature which requires the user to approve non-Apple kernel extensions (KEXTs). During a new installation of NI-488.2 for macOS, a System Extension Blocked notification appears. You need to approve the KEXT for NI-488.2 for macOS. Follow the steps below to approve the KEXT:
[*]Click on the Apple menu from the taskbar then select System Preferences.
[*]In the System Preferences window, select Security & Privacy.
[*]On the General tab, click on the padlock at the bottom left to be able to make changes.
[*]Click the Allow button next to the prompt 'System software from developer "National Instruments" was blocked from loading' at the bottom of the Security & Privacy window.
Enhancements and Bug Fixes in Version 21.0NI-488.2 version 21.0 adds support for macOS 10.15, macOS 11.0, LabVIEW 2020 and LabVIEW 2021.NI-488.2 version 21.0 fixes issues launching help from the NI-488.2 Troubleshooting Wizard.Enhancements and Bug Fixes in Version 19.5NI-488.2 version 19.5 adds support for macOS 10.14 and LabVIEW 2019.NI-488.2 version 19.5 does not support 32-bit applications.Enhancements and Bug Fixes in Version 18.5The Following Issues Were Resolved in NI-488.2 18.5373478: In a multicontroller application, all controllers used in the application would report EPWR error if one of the controllers lost power resulting in an EPWR error.Enhancements and Bug Fixes in Version 18.0NI-488.2 version 18.0 adds support for macOS 10.13 and LabVIEW 2018.Enhancements and Bug Fixes in Version 17.0NI-488.2 version 17.0 adds support for macOS 10.12 and LabVIEW 2017.Enhancements and Bug Fixes in Version 15.5Support for OS X 10.11NI-488.2 for Mac OS X, Version 15.5 adds support for OS X 10.11.Self-Test and Device Reset features are now available for all GPIB interfaces from within MAX.Self-Test and Device Reset features are now available for all GPIB interfaces from within Measurement & Automation Explorer (MAX). GPIB interfaces may be tested using the Self-Test feature, or tested programmatically through the System Configuration API. The Device Reset feature resets the selected GPIB hardware.Note:Although the NI-488.2 Troubleshooting Wizard remains available in this release, the functionality is deprecated in favor of the Self-Test feature.Performance of MAX has been improved.The GPIB-ENET/1000 configuration page can be launched using the Device Configuration command in MAX.The following issues were resolved in NI-488.2 15.5.12109: Calling ibonl when a board level ibwait is in progress could result in application crash.121181: A deadlock might occur when attempting to use a board handle with pending ibonl call on another thread.433395: Extra delay on ibwait and ibstop was removed for GPIB Ethernet-based hardware.478063: GPIB-USB-HS+ might become unresponsive upon rebooting in a virtual machine.518983: As a result of an issue introduced in NI-488.2 14.1, GPIB-USB-HS I/O bus communication can hang until the handle to the GPIB interface is closed when all of the following conditions are true:
[*]The affected interface is not CIC (Controller in Charge)
[*]A read or write is in progress
[*]An ibwait including the DCAS bit is in progress
[*]A device clear is received during the I/O transfer
545813: On OS X 10.11, signal termination (for example, Control + C) of a pending ibwrt with a large buffer causes subsequent ibfind to fail for GPIB-USB-HS.546910: GPIB Explorer and Troubleshooting Wizard fail to launch after upgrading from 3.0.1 or below to 14.1 on Mac OS X 10.11.Enhancements and Bug Fixes in Version 14.1Updated integer types in ni4882.hModified the integer types used in ni4882.h and NI4882.Framework. All uses of unsigned long have been replaced with unsigned int to improve compatibility with 64-bit compilers. This API has never been documented with prior versions of NI-488.2 for Mac OS X, but ni4882.h and a 32-bit version of NI4882.framework were installed on the system. Any user utilizing these files should update their applications according to the updated function prototypes in ni4882.h. This change does not impact ni488.h or NI488.framework.Note:This change remains binary compatible with any user who may have previously compiled against NI4882.Framework.New 64-bit Application InterfaceNI-488.2 for Mac OS X, Version 14.1, adds a 64-bit application interface that allows users to create 64-bit applications using the NI4882 framework. Using the 32-bit version of NI4882 framework, users can use the same NI4882 API to build corresponding 32-bit applications with no source code changes. For more information about the new NI4882 API, refer to the NI-488.2 Help. You can access NI-488.2 Help from GPIB Explorer by selecting Help»Help Topics»NI-488.2 from the menu bar.Added NI-MAX and NI-VISANI-488.2 for Mac OS X, Version 14.1, installs NI-VISA and NI-MAX by default. Installation can be customized by selecting Customize button during the Installation Type step.Support for NI System Configuration APINI-488.2 now reports GPIB controller interfaces through the NI System Configuration API.The following issues were resolved in NI-488.2 for Mac OS X, Version 14.1.122997: The EOIP status bit could remain set incorrectly if an ibwrta or ibrda call returned an EDVR error.171688: An ibnotify callback could fail to be triggered by END if the notify condition included END but not CMPL.205182: Asynchronous transfers could sometimes report EABO even though the transfer completed successfully.240000: On GPIB-USB-B and GPIB-USB-HS controllers, ibwait and ibnotify could fail to detect the CIC, LACS, and TACS bits.332479: On GPIB-USB-B and GPIB-USB-HS controllers, the first I/O operation after device insertion could be terminated prematurely.374822: Calling ibonl while ibnotify is pending could cause the process to crash under some circumstances.380705: Aborting an ibrda very quickly after starting it could allow a PCI-based GPIB interface to receive data when addressed as a listener, without a read in progress. The data is then lost and cannot be recovered.394848: If a GPIB controller is connected to a USB port on a Thunderbolt display, disconnecting and then reconnecting the display can cause the host machine to become unresponsive.404267: In some situations, the GPIB-ENET/1000 could hang while performing asynchronous transfers. This included fixes in both the NI-488.2 driver and the GPIB-ENET/1000 firmware. Users of the GPIB-ENET/1000 should update the GPIB-ENET/1000 firmware to version 1.1.0 to receive the full benefit of this fix.405414: In some cases the DCAS bit was not correctly cleared after being reported, causing it to be reported with subsequent calls.425931: Calling ibstop with an asynchronous operation in progress would sometimes not report an EABO error as expected.Enhancements and Bug Fixes in Version 3.0.1Support for 64-bit Mac OS X KernelNI-488.2 for Mac OS X now functions when using a 64-bit Mac OS X kernel.Support for GPIB-ENET/1000 ControllersThe GPIB-ENET/100 has been replaced by the GPIB-ENET/1000. The GPIB-ENET/1000 is configured using a web interface. This interface may be launched from within GPIB Explorer, or by discovering the GPIB-ENET/1000 web server using the BonJour pane in the Safari web browser.Revised Method for Configuring GPIB Ethernet DevicesThe standalone Ethernet Config and Firmware Update utilities are no longer installed. Ethernet devices are now discovered and configured from within GPIB Explorer. NI-488.2 for Mac OS X no longer includes a utility to update the firmware on a GPIB-ENET/100 device. Should you require this capability, contact National Instruments for support.Replacing NI SpyNI Spy is replaced by NI I/O Trace.Accessing the HelpRefer to the NI-488.2 Help, accessible from the GPIB Explorer by selecting Help»NI-488.2 Help from the menu bar.Legal InformationCopyright© 1995–2021 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesFor end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.Third-Party Legal NoticesYou can find third-party legal notices in the /Library/Application Support/National Instruments/Legal Information directory.U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375739F-01
页:
[1]