NI-XNET 20.5.1 Driver Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序20.5.1下载
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-XNET 20.5.1 Driver Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序20.5.1下载
NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。
NI-XNET 20.5.1
发布日期
2021/4/6
包含的版本
20.5.1
受支持的操作系统
Windows 7 (SP1) 32-bit
Windows 7 (SP1) 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
Windows Server 2016 64-bit
应用程序位数
32/64位
语言
德语，日语，英文
校验和
文件大小: 2321807360 字节 (2.16 GB)
修改日期: 2021-04-06 22:16
MD5: c90bb3cee4a20de3107d98fc1531b965
SHA1: d7f2617cea6ff2f28893c41548e45e8bbc5ea661
SHA256: ea67d20a06b042cb555392ce9ad1f8f2b212b9d467ea0a048a44b206d5688e2e
CRC32: 549c42b2
百度网盘与NI官方下载地址：
注册登录视觉论坛，购买附件查看下载地址
NI-XNET 20.5.1 ReadmeApril 2021This file contains installation instructions and compatibility information for NI-XNET.You can find more release information on ni.com.
[*]NI-XNET Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
[*]NI-XNET Manuals: New features, behavior changes, and other documentation
If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.OverviewSupported Operating SystemsApplication Software SupportInstallation InstructionsProduct Security and Critical UpdatesSupported HardwareBehavior ChangesAdditional Programming TopicsLabVIEW NXG Support and ConsiderationsAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Using NI software with Microsoft Windows 8.1Legal InformationOverviewNI-XNET is an NI instrument driver that features a common set of easy-to-use functions for reading and writing Automotive Ethernet, CAN, LIN, and FlexRay data on many different platforms including USB, PXI, PCI, NI CompactDAQ, and NI CompactRIO.Supported Operating SystemsNI-XNET supports the following operating systems:
[*]Windows 10/8.11/7 SP12
[*]Windows Embedded Standard 7 SP12
[*]Windows Server 2016
[*]Windows Server 2012 R21
[*]Windows Server 2008 R2 SP12
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.Notes
[*]Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/r/paesupport.
[*]The NI-XNET installer does not support Windows Server 2003/NT/Vista/XP/Me/2000/98/95 or the Windows Server non-R2 editions.
[*]NI-XNET does not support guest accounts on Windows 7. You must log into an administrative or user account to use NI-XNET on these operating systems.
[*]PXI Automotive Ethernet Interface Modules (PXIe-8521, PXIe-8522, and PXIe-8523) do not support the Phar Lap ETS real-time operating system that installs with the LabVIEW Real-Time Module.
NI-XNET Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021NI-XNET will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022NI Software will drop support for Phar Lap ETS Real-Time Operating System starting in 2022. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, please visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, please visit ni.com/r/b7g5wi.Application Software SupportThe following table lists the application software versions supported by NI-XNET.
Application Software3Versions Supported by NI-XNET 20.5
LabVIEW2017, 2018, 2019, and 2020
LabVIEW Real-Time (RT)2017, 2018, 2019, and 2020
LabVIEW NXG5.0
LabWindows™/CVI™2015 and later
3 Application software support for LabVIEW NXG is not included with NI-XNET and must be downloaded separately via NI Package Manager.
Microsoft Visual Studio SupportNI-XNET supports the following Microsoft Visual Studio versions and associated programming languages.
Programming LanguagesVersions Supported by NI-XNET 20.5
Microsoft Visual C/C++Visual Studio 2003 or later
Installation InstructionsDownload the NI-XNET installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.Supported Hardware
[*]USB-8501 Low-Speed/Fault Tolerant USB CAN Interface Device
[*]USB-8502 High-Speed/FD USB CAN Interface Device
[*]USB-8506 USB LIN Interface Device
[*]PCI-8511 Low‑Speed/Fault-Tolerant CAN Interface Device
[*]PCI-8512 High‑Speed/FD CAN Interface Device
[*]PCI-8513 Software‑Selectable/FD CAN Interface Device
[*]PCI-8516 PCI LIN Interface Device
[*]PCI-8517 FlexRay Interface Device
[*]PCIe-8510 PCIe Vehicle Multi-Protocol Interface Device
[*]PXI-8511 Low-Speed/Fault Tolerant PXI CAN Interface Module
[*]PXI-8512 High-Speed, Flexible Data Rate PXI CAN Interface Module
[*]PXI-8513 Software-Selectable PXI CAN Interface Module
[*]PXI-8516 PXI LIN Interface Module
[*]PXI-8517 PXI FlexRay Interface Module
[*]PXIe-8510 PXI Vehicle Multiprotocol Interface Module
[*]PXIe-8521 100BASE-T1 PXI Automotive Ethernet Interface Module
[*]PXIe-8522 1000BASE-T1 PXI Automotive Ethernet Interface Module
[*]PXIe-8523 100/1000BASE-T1 PXI Automotive Ethernet Interface Module
[*]TRC-8542 CAN HS/FD Transceiver Cable
[*]TRC-8543 CAN HS/FD or LS/FT Transceiver Cable
[*]TRC-8546 LIN Transceiver Cable
C Series modules:
[*]NI 9860 C Series Vehicle Multiprotocol Interface Module
[*]NI 9861 Low-Speed/Fault Tolerant C Series CAN Interface Module
[*]NI 9862 High-Speed, Flexible Data Rate C Series CAN Interface Module
[*]NI 9866 C Series LIN Interface Module
Supported platforms for XNET C Series modules:
[*]CompactDAQ—NI-DAQmx 17.1 (or later) is required for:
[*]USB Chassis: cDAQ-9171, cDAQ-9174, cDAQ-9178, and cDAQ-9179
[*]Ethernet Chassis: cDAQ-9181, cDAQ-9184, and cDAQ-9188
[*]Wireless Chassis: cDAQ-9191
[*]cDAQ Controller: cDAQ-9138 (Windows only) and cDAQ-9139 (Windows only)
[*]cDAQ Controller: cDAQ-9132 (Windows and RT) and cDAQ-9134 (Windows and RT)
[*]cDAQ Controller: cDAQ-9133 (Windows and RT) and cDAQ-9135 (Windows and RT)
[*]cDAQ Controller: cDAQ-9136 (Windows and RT) and cDAQ-9137 (Windows and RT)
[*]Ethernet Chassis: cDAQ-9185 and cDAQ-9189
[*]CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2017 (or later) are required for the following targets:
[*]Integrated CompactRIO Real-Time Controller: cRIO-906x, and cRIO-903x
[*]Single-Board RIO: sbRIO-9627, sbRIO-9607
[*]CompactRIO Real-Time Controller: cRIO-9032, cRIO-9037
[*]CompactRIO Real-Time Controller: cRIO-9035 (Sync), cRIO-9039 (Sync)
[*]When using a cRIO-903x or cRIO-906x, a bit stream is not needed with NI 986x modules in the project
[*]When using a cRIO-903x, cRIO-906x, or sbRIO-96x7, installation in the "Other" programming environment is not supported
[*]CompactRIO Real-Time Controller: cRIO-9040, cRIO-9042, cRIO-9043, cRIO-9045, cRIO-9047, cRIO-9048, and cRIO-9049
[*]When using a cRIO-904x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
[*]CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2018 (or later) are required for the following targets:
[*]CompactRIO Real-Time Controller: cRIO-9053, cRIO-9054, cRIO-9056, and cRIO-9057
[*]When using a cRIO-905x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
[*]CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2019 (or later) are required for the following targets:
[*]Single-Board RIO: sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, sbRIO-9638
[*]When using an sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, or sbRIO-9638, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
NoteThe NI-XNET software supports only NI Automotive Ethernet, CAN, FlexRay, and LIN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.Additional Programming TopicsNI-CAN CompatibilityIf you intend to use the NI-CAN API with NI-XNET hardware, refer to the NI-XNET Compatibility for NI-CAN appendix in the NI-CAN Hardware and Software Manual.Deployed databases on LabVIEW Real-Time targetsWhen upgrading the NI-XNET software on your LabVIEW Real-Time target, you need to re-deploy your database files to that target using a host computer that runs the same version of NI-XNET as the target.Removing and inserting C Series modules on CompactRIO targets during device communication is not supportedInserting a module into or removing a module from a cRIO chassis that is actively communicating with an NI 986x module can cause application failures and possibly device damage. This does not apply to controllers which support the NI-DAQmx programming method, such as the cRIO-904x family.RT Bus Monitor requires LabVIEW Real-TimeInstalling software to a Real-Time target using the "Other" programming environment will not run the RT Bus Monitor. To use this utility, select a "LabVIEW" or "LabVIEW NXG" programming environment.Behavior ChangesThe following behavior has changed in NI-XNET 20.5.1 from NI-XNET 20.5:
[*]The NI-XNET IP Stack service no longer starts automatically when NI-XNET is first installed.
LabVIEW NXG Support and ConsiderationsThe following sections detail considerations for using LabVIEW NXG with NI-XNET 20.5.1.LabVIEW NXG Operating Systems and System RequirementsSoftware support for LabVIEW NXG differs in the following ways:
[*]System requirements—Only 64-bit (x64) processors are supported.
[*]Operating system—Only 64-bit operating systems are supported. Refer to the Supported Operating Systems section for more information.
LabVIEW NXG HelpView context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.Additional documentation is available online at ni.com/manuals.LabVIEW NXG ExamplesLaunch LabVIEW and click the Learning tab.LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.Using NI Software with Microsoft Windows 8.1When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.Legal InformationCopyright© 2009–2021 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.374802Y-01
页:
[1]