LabVIEW Electric Motor Simulation Toolkit 2014 Win32Eng LabVIEW电动机仿真工具包NIEMsim2014
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
LabVIEW Electric Motor Simulation Toolkit 2014 Win32Eng LabVIEW电动机仿真工具包NIEMsim2014
LabVIEW电动机仿真工具包提供了开发桌面和硬件在环电动机系统仿真模型所需的建模元件。
LabVIEW电机仿真工具包是LabVIEW和VeriStand的软件附件。它为电子仿真、控制和硬件在环(HIL)提供了LabVIEW项目模板，以及适用于各种电机类型的VeriStand软件附件。该工具包可帮助您在主机上执行模型，以进行桌面仿真、LabVIEW实时仿真和基于FPGA的仿真。电动机仿真工具包包括开关磁阻电动机(SRM)、应电机和永磁同步电机模型，这些模型可以是近乎线性的简单模型也可以是更高保真度的模型。
NIEMsim2014
发布日期
2015/2/11
包含的版本
2014完整版
受支持的操作系统
Windows 8
Windows 7
Windows Vista
Windows XP
Windows Server 2008 R2 64-bit
Windows Server 2003 R2 32-bit
应用程序位数
32位
语言
英文
校验和
zip版
文件大小: 218780434 字节 (208.65 MB)
修改日期: 2019-06-25 02:53
MD5: 7237efef77a7146b07c724126e4e0ca6（官方正确）
SHA1: 8082630b8d0f6d16196261aeb3785b592394cd12
SHA256: ddd1ce616e9248fceba8c58f3a357053dee632d485599fc4f26b2952707777db
CRC32: 4b83fab3
exe版
文件大小: 218854176 字节 (208.72 MB)
修改日期: 2022-03-25 06:07
MD5: 9be8e8fe0ade08c7908b98f866688fa2(秒传)
SHA1: eea941a77653defe209fb2b23b7d06fae0fae437
SHA256: 74a24cda513b81f6a324fa8601f231b859c04383655dd05cf82b015f98202571
CRC32: 67a683bf
百度网盘和NI官方下载地址：
NI Electric Motor Simulation Toolkit 2014 ReadmeVersion 14.0.0December 2014This file contains important information about the NI Electric Motor Simulation Toolkit, including installation instructions, new features, behavior changes, recommended hardware, activating instructions, a partial list of bugs fixed for 2014, and known issues.OverviewSystem RequirementsInstallation InstructionsProduct Security and Critical UpdatesActivating the SoftwareRecommended HardwareNew FeaturesBehavior ChangesKnown IssuesBug FixesAccessing the HelpFinding ExamplesAutomating the Installation of NI ProductsHow to Use NI Software with Microsoft Windows 8.xNI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003Legal InformationOverviewThe Electric Motor Simulation Toolkit is an add-on for both the LabVIEW platform and NI VeriStand. The toolkit provides LabVIEW VIs and sample projects to help you control and simulate an electric motor by writing your own applications. The toolkit also extends the functionality of NI VeriStand by providing a series of custom devices for you to design and implement a real-time motor simulation application. This toolkit uses field-programmable gate array (FPGA) technology and integrates the finite element analysis (FEA) method to provide high-speed and high-fidelity electric motor simulation.The toolkit provides built-in examples of JMAG RTT files for motor simulation. You can use the RTT files with the examples, sample projects, or custom devices. To configure the controller and simulator and use the built-in RTT files, refer to the National Instruments website for more information.System RequirementsIn addition to the system requirements for the LabVIEW Development System, the Electric Motor Simulation Toolkit has the following requirements for LabVIEW support:
[*]LabVIEW 2014 Full or Professional Development System (32-bit)
[*]LabVIEW 2014 Real-Time Module
[*]LabVIEW 2014 FPGA Module
[*]LabVIEW 2014 Control Design and Simulation Module
[*]NI-RIO Device Drivers August 2014 release
[*]At least 256 MB of disk space
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2014.For NI VeriStand support, the Electric Motor Simulation Toolkit has the following requirements:
[*]NI VeriStand 2014
[*]NI-RIO Device Drivers August 2014 release
[*]At least 256 MB of disk space
Refer to the NI VeriStand Readme for additional system requirements and supported operating systems for NI VeriStand 2014.Installation InstructionsDouble-click the setup.exe file in the root directory of the Electric Motor Simulation Toolkit installer and follow the instructions on the screen to install this product.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.Activating the SoftwareFor LabVIEW support, you evaluate and activate the Electric Motor Simulation Toolkit the same as activating LabVIEW. Refer to the LabVIEW Help for more information about activating your software.For NI VeriStand support, complete the following steps to activate the Electric Motor Simulation Toolkit.
[*]Launch NI License Manager by selecting Start»All Programs»National Instruments»NI License Manager or from NI Launcher in Windows 8.x.
[*]In the NI License Manager tree, navigate to the Electric Motor Simulation Toolkit in the Local Licenses»LabVIEW 2014»Toolkits folder.
[*]Double-click the toolkit name or right-click the toolkit and select Activate from the shortcut menu.
[*]In the NI Activation Wizard that appears, select Apply one or more 20-character activation codes previously acquired for this computer and click the Next button.
[*]Enter the activation code and click the Next button. The activation code is the serial number on the product packing slip or on the shipping label.
[*]Check the activation status of this toolkit in the NI License Manager.
NoteIf you installed the Electric Motor Simulation Toolkit with a serial number, the Activation Wizard launches after the installation is complete. You can just complete step 4-6 to activate the toolkit.Recommended HardwareNational Instruments recommends the following hardware for you to use with this toolkit.
ModelSimulating on RTSimulating on FPGA
ACIM Constant Parameter ModelNI PXIe-8135 RTNI PXI-7854R
PMSM Constant Parameter ModelNI PXIe-8135 RTNI PXI-7854R
PMSM Variable Parameter ModelNI PXIe-8135 RTNI PXI-7854R
PMSM FEA ModelNI PXIe-8135 RTNI PXIe-7966R + HKS-9609 by Keisokugiken Corporation (KGC)
NoteYou can use NI PXIe-7965R for simulating on an FPGA target. However, when you compile the FPGA code, you must set the frequency of Top-Level Clock on the FPGA target to 80 MHz or less. Otherwise, LabVIEW fails to compile the FPGA bitfile.
SRM Linear ModelNI PXIe-8135 RTNI PXI-7854R
SRM FEA ModelNI PXIe-8135 RTNI PXIe-7965R/7966R + HKS-9609 by Keisokugiken Corporation (KGC)
New FeaturesThe Electric Motor Simulation Toolkit 2014 introduces the following new features and enhancements.Simulating an ACIM with the Constant Parameter ModelYou can simulate an AC induction motor (ACIM) with the constant parameter model and integrate the ACIM into your own hardware-in-the-loop (HIL) solution. ACIM is the most common motor in motion control systems. Main advantages of ACIM are simple and rugged design, low cost, and low maintenance. The Electric Motor Simulation Toolkit provides VIs, examples, sample projects, and custom devices for you to simulate an ACIM.Simulating a PMSM with the Variable Parameter ModelYou can use the variable parameter model to simulate a permanent magnet synchronous motor (PMSM) with medium fidelity. The variable parameter model uses the d-q axes mathematical method to simulate an electric motor. The variable parameter model can obtain real motor characteristics either from the RTT files or from an external model. The Electric Motor Simulation Toolkit provides VIs, examples, sample projects, and custom devices to help you to simulate a PMSM and integrate the PMSM into your hardware-in-the-loop (HIL) solution.Simulating an Advanced Three-Phase Inverter ModelYou can simulate an inverter with the advanced three-phase inverter model. The advanced three-phase inverter model simulates the transient behavior of the inverter. By using the advanced three-phase inverter model, you can specify the forward voltage drops of the inverter switches and insert fault to the inverter at run time.Performing the Temperature Correction FunctionalityYou can perform the temperature correction functionality for ACIM constant parameter model simulation, PMSM FEA model simulation, and PMSM variable parameter model simulation. By using the temperature correction functionality, you can simulate the changes of resistance, magnet flux, or torque in an electric motor according to temperature variations.New VIsThe Electric Motor Simulation Toolkit includes the following new VIs.
[*]On the AC Induction Motor VIs palette:
[*]ACIM Constant Parameter Model VI—Simulates the ACIM by using the constant parameter model function.
[*]Generate ACIM Constant Parameter Model FPGA Data VI—Generates data for simulating an ACIM on FPGA targets by using the constant parameter model function.
[*]On the Permanent Magnet Synchronous Motor VIs palette:
[*]Create PMSM Variable Parameter Model VI—Reads the RTT file or imports an external model to get a LabVIEW class reference of PMSM variable parameter model.
[*]Create PMSM FEA Model VI—Reads the RTT file to get a LabVIEW class reference of PMSM FEA model.
[*]Generate PMSM Variable Parameter Model FPGA Data VI—Generates data for simulating a PMSM on FPGA targets by using the variable parameter model function.
[*]PMSM Variable Parameter Model VI—Simulates the PMSM by using the variable parameter model function.
[*]On the Inverter VIs palette:
[*]3-Phase Inverter Model VI—Simulates a three-phase inverter.
[*]Generate 3-Phase Inverter Model FPGA Data VI—Generates data for simulating a three-phase inverter on FPGA targets.
[*]On the Transforms VIs palette:
[*]Clarke Transform VI—Transforms the three-phase current or voltage to alpha and beta currents or voltages.
[*]Inverse Clarke Transform VI—Transforms the alpha and beta currents or voltages to three-phase current or voltage.
New ExamplesThe Electric Motor Simulation Toolkit provides the following new examples.You can use the following new examples to simulate an ACIM:
[*]ACIM Open Loop Simulation.vi—Simulates the current and torque outputs of an ACIM with given voltage.
[*]ACIM Constant Parameter Model Closed Loop.vi—Performs the closed-loop simulation of an ACIM with the constant parameter model.
[*]ACIM FPGA Verification.lvproj—Verifies the correctness of ACIM simulation on an FPGA target using the constant parameter model.
[*]ACIM Constant Parameter Model Control Simulation.lvproj—Performs the closed-loop simulation of an ACIM using the constant parameter model.
You can use the following new examples to simulate a PMSM:
[*]PMSM Variable Parameter Model Closed Loop.vi—Performs the closed-loop simulation of a PMSM with the variable parameter model.
[*]PMSM FPGA Verification.lvproj—Verifies the correctness of PMSM simulation on an FPGA target using the constant parameter model, variable parameter model and finite element analysis (FEA) model.
[*]PMSM Variable Parameter Model Control Simulation.lvproj—Performs the closed-loop simulation of a PMSM using the variable parameter model.
[*]PMSM Constant Parameter Model Control Simulation.lvproj—Performs the closed-loop simulation of a PMSM using the constant parameter model.
You can use the following new examples to simulate a switched reluctance motor (SRM):
[*]SRM Linear Model Control Simulation.lvproj–Performs the closed-loop simulation of an SRM using the linear model.
New Sample ProjectsSelect File»Create Project from LabVIEW to launch the Create Project dialog box. Select Motor Simulation from the Sample Projects category list to access the sample projects.The toolkit provides the following new sample projects for you to simulate an ACIM with the constant parameter model.
[*]ACIM Constant Parameter Model RT Simulation
[*]ACIM Constant Parameter Model Simulation
The toolkit provides the following new sample projects for you to simulate a PMSM with the variable parameter model.
[*]PMSM Variable Parameter Model RT Simulation
[*]PMSM Variable Parameter Model Simulation
New Custom DevicesTo access the Electric Motor Simulation custom devices in your NI VeriStand project, open the System Explorer window, navigate to Targets»Controller»Custom Devices, right-click Custom Devices, and select a custom device for electric motor simulation from the shortcut menu.The toolkit provides the following new custom devices for you to design and implement real-time motor simulation applications.
[*]ACIM Constant Parameter Model Custom Device
[*]PMSM Variable Parameter Model Custom Device
Behavior ChangesThe Electric Motor Simulation Toolkit 2014 introduces the following behavior changes.VI ChangesThe Electric Motor Simulation Toolkit 2014 includes the following changes to VIs.
[*]The PMSM FEA Model VI and the Generate PMSM FEA Model FPGA Data VI become polymorphic VIs to support PMSM simulation with uniform resistance or phase resistances.
[*]The PMSM FEA Model VI includes a new temperature input, which specifies the coil temperature and the magnet temperature of the motor for temperature correction.
[*]The Read PMSM RTT File VI is deprecated. Use the Create PMSM FEA Model VI instead.
[*]The Resolver Model VI includes a new transformation ratio input, which specifies the scaling ratio of the output signals.
Simulation Rate ImprovementsThe Electric Motor Simulation Toolkit 2014 includes the following improvements on the simulation rate.
[*]The simulation loop rate of SRM linear model on FPGA targets changes from 1 microsecond to 0.8 microsecond.
[*]The simulation loop rate of PMSM constant parameter model on FPGA targets changes from 1 microsecond to 0.9 microsecond in LabVIEW and 0.95 microsecond in NI VeriStand.
Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the Electric Motor Simulation Toolkit.Bug FixesThe following items are the IDs and titles of a subset of issues fixed in the Electric Motor Simulation Toolkit. This is not an exhaustive list of issues fixed in the current version of the Electric Motor Simulation Toolkit. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
IDFixed Issue
426911EM-Sim only supports one resistance for all phases currently.
431695The TDMS file created by EM-Sim VeriStand add-on produces error when opened in DIAdem.
433640There is no documentation for selecting a proper base value for per-unit calculations.
473399Equations for d voltage and q voltage in Constant Parameter Model topic are incorrect.
480428The ideal inverter model should return 0V voltage when all gate signals are False.
480429The PMSM FEA model custom device should return 0A current when the motor controller is not present.
Accessing the HelpRefer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Electric Motor Simulation Toolkit. You can find help information about this toolkit in the Toolkits»Electric Motor Simulation Toolkit book on the Contents tab.Refer to the NI VeriStand Help, accessible by selecting Help»Search the NI VeriStand Help from NI VeriStand, for information about the Electric Motor Simulation custom devices.Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. Navigate to the Toolkits and Modules»Electric Motor Simulation folder to access the examples. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.You also can find examples for the Electric Motor Simulation Toolkit in the labview\examples\Electric Motor Simulation directory.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
[*]For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
[*]For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
[*]To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.xWhen you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
NoteNI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.x DesktopStart screenRight-click application and select Pin to Start
Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).For more information about NI support for Windows 8.x, visit ni.com/windows8.NI Electric Motor Simulation Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016National Instruments Electric Motor Simulation Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Electric Motor Simulation Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows™/CVI™cvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle
Legal InformationCopyright© 2013–2014 National Instruments. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.375059A-01
页:
[1]