注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
NI Spectral Measurements Toolkit 2.6.4 Win32/64Eng NI频谱测量工具包SMT2.6.4
Spectral Measurements工具包
Spectral Measurements工具包为时域和频域信号提供频谱分析和频谱测量工具。
Spectral Measurements工具包是LabVIEW、C和.NET的一款附加软件，提供了用于频谱分析和频谱测量的功能和工具。借助该工具包，您可以对时域数据执行连续（实时）或块（无损）缩放FFT处理，以计算所需的结果，例如原始FFT、幅度谱、功率谱、互谱、频率响应和频谱图。使用Spectral Measurements工具包，您可以对处理后的数据，比如频带功率、相邻信道功率(ACP)、占用带宽(OBW)、峰值搜索等执行频谱测量。Spectral Measurements工具包还提供了高级处理参数，包括分辨率带宽(RBW)、加窗、滤波、单位转换和各种频谱均值法。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Spectral Measurements Toolkit 2.6.4
发布日期：2013/06/28
包含的版本：2.6.4
受支持的操作系统
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
语言：English
应用程序位数：32/64位
校验和：
文件大小: 965591840 字节 (920.86 MB)
修改日期: 2022-03-25 06:09
MD5: 69bed5278435e1cc9ca3d3d792230798
SHA1: cc6cbf1076a85cd3089ce5d198cb99b0d76cd508
SHA256: b252b101d51207bb7a051bc444ef3c8a1938f5df36e94559b50c2c0fbd5bddc6
CRC32: b1dedc2f
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
SMT2.6.4.txt
(499 Bytes, 下载次数: 0, 售价: 10 元)
NI Spectral Measurements Toolkit Readme2013 Version 2.6.4 Thank you for using the NI Spectral Measurements Toolkit (SMT). This file contains important information about the toolkit and is organized into the following sections: - New Features
- Supported Hardware
- System Requirements
- Supported Drivers
- Installed File Names and Locations
- Updates and Notifications
- Uninstalling/Modifying NI Spectral Measurements Toolkit
- Known Issues
- Bug Fixes
- Automating the Installation of NI Products
- Important Information
New FeaturesNI Spectral Measurements Toolkit 2.6.4 adds support for LabVIEW 2012. NI Spectral Measurements Toolkit 2.6.2 adds support for LabVIEW 2011. NI Spectral Measurements Toolkit 2.6 includes the following new features: - Support for generating and applying pulse shaping filter on user-defined regions of a given spectrum through the addition of a new palette-level VI—SMT Filter Spectrum VI
- Addition of the SMT Spectrum Peak Search (Advanced VI), and the SMTSpectrumPeakSearchMaxNPeaks function
NI Spectral Measurements Toolkit 2.5 includes the following new feature: - Japanese localization for LabVIEW application programming interface (API) and documentation
Supported HardwareVector Signal Analyzers- NI PXI-5660
- NI PXI-5661
- NI PXIe-5663
- NI PXIe-5663E
- NI PXIe-5665
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help. Vector Signal TransceiverDigitizers- NI PXI-5621
- NI PXI-5620
- NI PXI-5122
- NI PXI-5124
- NI PCI-5122
- NI PCI-5124
- NI PXI-5922
- NI PXI-5142
- NI PXIe-5122
- NI PXIe-5622
Device-specific information about these modules is included in the NI High-Speed Digitizers Help.
System RequirementsSupported Operating SystemsNote NI Spectral Measurements Toolkit 2.6.4 does not support Windows 8.
NI Spectral Measurements Toolkit 2.6.4 and later supports the following operating systems: - Windows 7 (32-bit and 64-bit)
- Windows Vista (32-bit and 64-bit)
- Windows XP Service Pack 3 (32-bit)
- Windows Server 2003 R2 (32-bit)
- Windows Server 2008 R2 (64-bit)
Note NI Spectral Measurements Toolkit 2.6.4 and later does not support Windows Server non-R2 editions.
It is recommended that you have the most recent service pack for your operating system installed. Supported Real-Time Operating EnvironmentsNI Spectral Measurements Toolkit 2.6.4 and later supports the following real-time operating environments: Minimum System Requirements- Free hard drive space—3 GB
- RAM—256 MB
Recommended System- Free hard drive space—4 GB
- RAM—1 GB
Note The SMT run-time Engine must be installed on systems running applications built using the NI Spectral Measurements Toolkit and LabWindows/CVI. The SMT run-time installer is available on the NI Spectral Measurements Toolkit CD in the NISMTCVIRTE folder (setup.exe). Application Development Environments (ADEs)Note You should install ADEs, such as NI LabVIEW or NI LabWindows/CVI, before installing NI Spectral Measurements Toolkit. To add support for ADEs installed after installing NI Spectral Measurements Toolkit, modify your NI Spectral Measurements Toolkit installation or launch the NI Spectral Measurements Toolkit installer again. - NI LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 SP1 (32-bit), or 2012 SP1 (64-bit)
- NI LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1, or 2012 SP1
- LabWindows™/CVI™ 9.0, 2009, 2010, or 2011
Supported DriversInstall all the instrument drivers for the hardware you intend to use before installing the NI Spectral Measurements Toolkit. The toolkit supports the following drivers: - NI-RFSA 2.1 or later
- NI-SCOPE 3.4 or later
If you install one or more of the aforementioned drivers after installing the NI Spectral Measurements Toolkit 2.6.4, driver-specific toolkit examples and palette VIs are not present. To install these driver-specific files, you must run the Modify function from the NI Spectral Measurements Toolkit installer. To do so, follow the instructions found in the Uninstalling/Modifying NI Spectral Measurements Toolkit section. Installed File Names and Locations- is an alias for the following National Instruments file folder location:
- Windows XP: \All Users\Shared Documents\National Instruments
- Windows 7/Vista: \Public\National Instruments
- is an alias for the following National Instruments file folder location:
- Windows 7 (32-bit)/Vista (32-bit)/XP (32-bit)
- LabVIEW (32-bit): Program Files\National Instruments
- Windows 7 (64-bit)/Vista (64-bit)/XP (64-bit)
- LabVIEW (32-bit): Program Files(x86)\National Instruments
- LabVIEW (64-bit): Program Files\National Instruments
- is an alias for the following National Instruments file folder location:
- LabVIEW 2009 SP1 (32-bit): \LabVIEW 2009
- LabVIEW 2009 SP1 (64-bit): \LabVIEW 2009
- LabVIEW 2010 SP1 (32-bit): \LabVIEW 2010
- LabVIEW 2010 SP1 (64-bit): \LabVIEW 2010
- LabVIEW 2011 SP1 (32-bit): \LabVIEW 2011
- LabVIEW 2011 SP1 (64-bit): \LabVIEW 2011
- LabVIEW 2012 SP1 (32-bit): \LabVIEW 2012
- LabVIEW 2012 SP1 (64-bit): \LabVIEW 2012
File Locations| Item | Installed Location | | LabVIEW | | VIs | \vi.lib\addons\Spectral Measurements Toolset | | Examples | \Spectral Measurements Toolset | | LabWindows/CVI | | Header Files | \Shared\CVI\Include | | Static Libraries (32-bit) | \Shared\CVI\Bin\msvc | | Static Libraries (64-bit) | \Shared\CVI\Bin\msvc64 | | .lfp/.sub Files | \Shared\CVI\Bin | | Examples | \National Instruments\CVI\samples\smt | | C | | Header Files | \Shared\ExternalCompilerSupport\C\include | | Import Library (32-bit) | \Shared\ExternalCompilerSupport\C\lib32\msvc | | Import Library (64-bit) | \Shared\ExternalCompilerSupport\C\lib64\msvc |
Notes On Creating Modulation Executables Using Spectral Measurements Toolkit and LabVIEW Application Builder, available on the National Instruments website, contains information about which VIs must be included as dynamic VIs in LabVIEW Application Builder for the executable file to run correctly. DocumentationDocumentation is available at Start»All Programs»National Instruments»Spectral Measurements Toolkit. The documentation set is composed of the following documents: - NI Spectral Measurements Toolkit Readme
- NI LabVIEW Spectral Measurements Toolkit Help—HTML help format. Contains reference information about the Spectral Measurements LabVIEW VIs.
- NI Spectral Measurements Toolkit Function Reference Help—HTML help format. Contains reference information about the Spectral Measurements LabWindows/CVI functions.
- NI Spectral Measurements Toolkit User Guide—PDF format. Contains information about using the NI Spectral Measurements Toolkit for frequency-domain measurements.
Spectral Measurements Toolkit Updates and NotificationsNational Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info, and enter the info code updates to access this information. Uninstalling/Modifying the NI Spectral Measurements ToolkitPerform the following procedure to uninstall NI LabVIEW Spectral Measurements Toolkit 2.6.4: For Windows XP, complete the following steps: - Launch the Control Panel by selecting Start»Control Panel.
- Double-click Add or Remove Programs.
- Select National Instruments Software.
- Click Change/Remove.
- Select NI LabVIEW Spectral Measurements Toolkit 2.6.4 from the dialog box that appears.
Note To uninstall or modify the NI Spectral Measurements Toolkit for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit 2.6.4 from the dialog box that appears.
Note To uninstall or modify the NI Spectral Measurements Toolkit Runtime for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit Runtime 2.6.4 from the dialog box that appears. - Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 7/Vista, complete the following steps: - Launch the Control Panel by selecting Start»Control Panel.
- Double-click Programs and Features.
- Select National Instruments Software.
- Click the Uninstall/Change button.
- Select NI LabVIEW Spectral Measurements Toolkit 2.6.4 from the dialog box that appears.
Note To uninstall or modify the NI Spectral Measurements Toolkit for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit 2.6.4 from the dialog box that appears.
Note To uninstall or modify the NI Spectral Measurements Toolkit Runtime for LabWindows/CVI, select NI LabWindows/CVI Spectral Measurements Toolkit Runtime 2.6.4 from the dialog box that appears. - Click Remove to uninstall the product; click Modify to change the components that are installed.
Note Do not attempt to uninstall by manually deleting files. Known IssuesYou can access the software and documentation known issues list online. Refer to the NI Spectral Measurements Toolkit 2.6, 2.6.1, 2.6.2, 2.6.3, and 2.6.4 Known Issues at ni.com for an up-to-date list of known issues in NI Spectral Measurements Toolkit 2.6.4. Bug FixesThe following items are changes in NI Spectral Measurements Toolkit 2.6.4 from NI Spectral Measurements Toolkit 2.6.3. | ID | Fixed Issue | | 374121 | Fixed an issue where NI Spectral Measurements Toolkit did not install on LabVIEW 2012. | | 404823 | Fixed an issue where multiple shortcuts to documents were present in the Start Menu folder for NI Spectral Measurements Toolkit. |
The following items are changes in NI Spectral Measurements Toolkit 2.6.3 from NI Spectral Measurements Toolkit 2.6.2. | ID | Fixed Issue | | 320267 | Fixed an issue where license manager was unable to check out NI Spectral Measurements Toolkit license from certain packages in a volume license file. |
The following items are changes in NI Spectral Measurements Toolkit 2.6.2 from NI Spectral Measurements Toolkit 2.6.1. | ID | Fixed Issue | | 309228 | Fixed an issue where an error message about conflicts between different dir.mnu is displayed when opening a VI from a LabVIEW project that has Spectral Measurement Toolkit dependencies. | | 307793 | Fixed an issue where the SMT filter spectrum function clears all the values of the spectrumInfo struct. |
The following items are changes in NI Spectral Measurements Toolkit 2.6.1 from NI Spectral Measurements Toolkit 2.6. | ID | Fixed Issue | | 293100 | Fixed an issue where users were unable to install some of the components of the NI Spectral Measurements Toolkit on LabVIEW 2010. |
The following items are changes in NI Spectral Measurements Toolkit 2.6 from NI Spectral Measurements Toolkit 2.5.1. | ID | Fixed Issue | | 34854 | Fixed an issue where the SMT peak search routine does not detect peaks that fall on the power spectrum boundaries. |
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important InformationCopyright © 2005–2013 National Instruments. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the \_Legal Information and directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. | 
楼主
