NI SignalExpress Base Win32德语/日语/法语/英文 数据记录软件Signal Express Base
NI SignalExpress Base Win32德语/日语/法语/英文 数据记录软件Signal Express BaseSignalExpress
SignalExpress使您无需编程即可记录、分析和显示测量设备的数据。
SignalExpress是一款交互式数据记录软件，让您无需编程，即可从数百种数据采集仪器和设备上快速采集、分析并显示数据。SignalExpress用户可以控制400多台基于PC的独立仪器，以及来自250多个数据采集设备的日志数据。该软件可以处理和分析信号，并将结果信号发送到硬件设备。SignalExpress还提供自动LabVIEW代码生成功能，可扩展应用程序。用户可以轻松创建自定义报告，并将其导出到LabVIEW、DIAdem或Microsoft Excel中。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
发布日期：2006/9/1
包含的版本：Base
受支持的操作系统
Windows
Windows 2000
Windows XP
语言：德语, 日语, 法语, 英文
应用程序位数：32位
校验和：
文件大小: 289999679 字节 (276.57 MB)
修改日期: 2006-08-19 05:04
MD5: 98c85c7c2ff831ab413f0bc710b6d720
SHA1: a658f80d8195573702fe8b8c2bb097e692b12c8f
SHA256: 3c03207d8e0a3f0595c37bc14c92a03e9f788bd8f429634505f5badcec873ae0
CRC32: 33e4ee6f
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
NI SignalExpress Tektronix Edition ReadmeDecember 2005This file contains important information about NI SignalExpress Tektronix Edition, including known issues, installation, and compatibility issues. Refer to Getting Started with NI SignalExpress Tektronix Edition for information about getting started with NI SignalExpress Tektronix Edition. You can access this PDF by selecting Help»Getting Started with»Tektronix Edition in the Express Workbench environment.Installation InstructionsInsert the NI SignalExpress Tektronix Edition CD in your CD-ROM drive and follow the prompts through the installation.NI SignalExpress Tektronix Edition installs or updates the following applications:
[*]MAX 4.0
[*]LabVIEW Run-Time Engine 7.1.1
Note There is a known installation issue if Microsoft .NET Framework 2.0 Beta 1 is present on your computer. This issue causes the installation of NI SignalExpress Tektronix Edition to fail. To correct this problem, uninstall Microsoft .NET Framework 2.0 Beta 1 or upgrade to Microsoft .NET Framework 2.0 or later before you run the NI SignalExpress Tektronix Edition installer again.Connecting to Tektronix InstrumentsYou can use NI SignalExpress Tektronix Edition to connect Tektronix instruments. With built-in USB plug-and-play capabilities in Windows XP, NI SignalExpress Tektronix Edition automatically detects when a supported Tektronix instrument is connected to your computer. With this functionality, you can immediately control the instrument and acquire data from the instrument.Connecting to NI HardwareComplete the following steps to use NI SignalExpress Tektronix Edition with NI hardware:
[*]Install the appropriate driver for that hardware. For Multifunction DAQ, use NI-DAQmx. For High-Speed Digitizers, use NI-SCOPE. For Signal Generators, use NI-FGEN. For Digital Multimeters, use NI-DMM. All drivers are available on the Driver CD.
[*]Shut down the computer.
[*]Install the hardware.
[*]Restart the computer to complete the software installation.
Compatibility IssuesSignalExpress is compatible with the following products:
[*]NI-DAQmx 7.3 or later
[*]NI-SCOPE 2.7 or later
[*]NI-FGEN 2.2 or later
[*]NI-HSDIO 1.3.1 or later
[*]NI-HWS 1.3.1 or later
[*]NI-DMM 2.4.2 or later
[*]IVI Compliance Package 2.0 or later
[*]IVI Driver Toolset 2.0 or later
To convert an Express Workbench project to a LabVIEW VI, you must have the LabVIEW 7.1 Full Development System or greater installed.The Wait on previous step control in the NI-DAQmx Acquire and NI-SCOPE Acquire steps is now the Start this step after control. Use this control to specify what step to wait for before starting the current step.Known Issues
[*]The IVI Instrument Steps support IVI-C Drivers.
[*]You can configure only one IVI session name for a driver. If you configure more than one IVI session name for a driver, you invalidate existing IVI session names for that driver.
[*]If you delete an IVI logical name in MAX without deleting its corresponding hardware asset, NI SignalExpress steps using that name fail and you cannot recreate that same name within NI SignalExpress. You must create a new IVI session name in NI SignalExpress or delete the corresponding hardware asset in MAX.
[*]LabVIEW prompts you with a warning dialog box during project conversion if LabVIEW loads vi.lib subVIs from the National Instruments\LabVIEW 7.1 directory rather than from the directory where you saved your project. Click the OK button to resume conversion.
[*]The Load from ASCII, Load from LVM, and Load from SPICE steps only convert 20 imported signals into the LabVIEW VI during project conversion. If you want to import more than 20 signals and then convert the project to a LabVIEW VI, use two or more Load from ASCII, Load from LVM, or Load from SPICE steps.
[*]You cannot convert an Express Workbench project to a LabVIEW block diagram if that project uses software triggers.
[*]Text in any Step Setup dilaog box does not display correctly if you set your monitor resolution to 1400 x 1050 or higher or if you use large fonts.
[*]Due to driver and operating system issues, absolute time stamps have an inaccuracy of 100 ms to 200 ms. National Instruments recommends that you use relative time stamps.
[*]You cannot use Start Trigger from the NI-FGEN Standard Function step or the NI-FGEN Arbitrary Waveform step in continuous generation mode if the NI-FGEN steps are in a sweep operation. The reason is that, during a sweep operation, the NI-FGEN devices only send a start trigger at the first sweep iteration.
[*]If you configure a device to start on a digital trigger and the trigger source is the start trigger of an analog output NI-DAQmx supported device, the device might receive the start trigger before the generation starts. This can occur the first time you run the project or on the first iteration of a continuous execution. To work around this issue, configure the analog output device to be a slave by configuring the device with a digital trigger and selecting a trigger signal from another device as the trigger source.
© 2004, 2005 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.FireWire® is the registered trademark of Apple Computer, Inc.Handle Graphics®, MATLAB®, Real-Time Workshop®, Simulink®, and Stateflow® are registered trademarks, and TargetBox2™, xPC TargetBox2™, and Target Language Compiler™ are trademarks of The MathWorks, Inc.Tektronix® and Tek are registered trademarks of Tektronix, Inc.Other product and company names mentioned herein are trademarks or trade names of their respective companies.Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.
页:
[1]