注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
LabVIEW 2013 Remote Development Target Support Win32Eng NI LabVIEW远程开发硬件支持RDTS2013LVRDEV
LabVIEW Remote Development Target Support可帮助您在远程NI硬件上开发、运行、调试和部署LabVIEW VI。
LabVIEW Remote Development Target Support是一个驱动软件，用于支持运行Windows Embedded Standard操作系统的NI硬件。您可以在主机上使用LabVIEW开发、运行和调试Windows Embedded Standard硬件上的VI。您可以使用主机内置的安装程序将VI部署到Windows Embedded Standard硬件上。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
发布日期：2013/08/5
包含的版本：2013，13.0.0
受支持的操作系统
Windows Embedded
语言：英语
应用程序位数：32位
校验和：
文件大小: 421782304 字节 (402.24 MB)
修改日期: 2023-05-11 16:51
MD5: f40c74a285bde72713ff312bddb9f479
SHA1: 7c36a8c519e17975a2a80aa196cdb638241c8b2b
SHA256: 7b09180298984a0284d195062f1527716f856168c663701f6d193faafebfddf4
CRC32: 9746ef85
百度网盘下载和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址，充值请联系在线客服
LVRDEV2013.txt
(433 Bytes, 下载次数: 0, 售价: 10 元)
NI LabVIEW 2013 Remote Development Target Support ReadmeVersion 13.0.0 June 2013 This file contains important information about NI LabVIEW Remote Development Target Support, including installation instructions, configuration instructions, troubleshooting, and known issues. Overview System Requirements Installation Instructions Remote Development Requirements Enabling LabVIEW Remote Development Troubleshooting Guide Known Issues Accessing the Help Automating the Installation of NI Products
OverviewNI LabVIEW Remote Development Target Support enables you to develop, run, and debug LabVIEW VIs on National Instruments hardware running the Windows Embedded Standard operating system. You develop, run, and debug the VIs on the Windows Embedded Standard target from a host computer with the LabVIEW Development System. The following National Instruments hardware is supported: System RequirementsLabVIEW Remote Development Target Support has system requirements for the host computer and target. | Host Computer | Target | The host computer must meet the following system requirements:
- LabVIEW Professional Development System (32-bit)
- Additional drivers required for your application.
Note The version of drivers you install on the host computer and target must match.
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for the LabVIEW Development System. | The target must meet the following system requirements:
- Windows Embedded Standard 7 operating system
- LabVIEW Remote Development Target Support, which installs the LabVIEW Run-Time Engine. The version of the LabVIEW Run-Time Engine matches the version of LabVIEW Remote Development Target Support.
Note The version and bitness of the LabVIEW Development System on the host computer must match the version and bitness of the LabVIEW Run-Time Engine on the target. - Additional drivers required for your application.
Note The version of drivers you install on the host computer and target must match.
|
Installation InstructionsIf you purchased National Instruments hardware running the Windows Embedded Standard operating system on or after August 2013, your hardware comes pre-installed with LabVIEW Remote Development Target Support. If you purchased National Instruments hardware running the Windows Embedded Standard operating system prior to August 2013, you can install LabVIEW Remote Development Target Support and additional software by downloading the installer from the National Instruments website. LabVIEW Remote Development Target Support Updates and NotificationsNational Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info, and enter info code updates to access this information. Remote Development RequirementsAfter installing LabVIEW Remote Development Target Support on the target, the target must meet the following requirements before you can develop applications remotely from a host computer: - A user with administrator privileges is logged into the target.
- LabVIEW Remote Development is enabled on the target.
Enabling LabVIEW Remote DevelopmentComplete the following steps to enable LabVIEW Remote Development on the target. You must restart and log into the target for changes to take effect.
Note By default, LabVIEW Remote Development is enabled if you manually install LabVIEW Remote Development Target Support. If the target comes pre-installed with LabVIEW Remote Development Target Support, you must complete the following steps. - Right-click the NI MAX icon on the desktop and select Run as administrator.
- Select My System in the configuration tree if it is not selected.
- On the Settings page, ensure that LabVIEW Remote Development in the Remote Development Settings section contains a checkmark.
| Note Ensure that the Run-Time Engine Version matches the version and bitness of the LabVIEW Development System on the host computer. |
- Ensure the Startup Type in the RIO Service Settings section specifies Automatic to use FPGA on the target remotely.
- Click Save and restart the target. You must log into the target for changes to take effect.
The target is now enabled for remote development. Refer to the Fundamentals»Working with Projects and Targets»Concepts»Working with Windows Embedded Standard Targets topic on the Contents tab of the LabVIEW Help for more information about developing applications on Windows Embedded Standard targets. Target SecurityNational Instruments recommends that you disable LabVIEW Remote Development after deploying applications to targets that are not used for development. To disable LabVIEW Remote Development, complete the following steps. - In the Remote Development Settings section of the System Configuration page, remove the checkmark from LabVIEW Remote Development.
- In the RIO Service Settings section, specify Manual or Disabled for the Startup Type.
- Restart the target for changes to take effect.
Refer to the NI Developer Zone at ni.com for more information about security when developing and deploying applications to a target remotely. Troubleshooting GuideUse the following table to find solutions when using LabVIEW Remote Development Target Support and developing applications on a Windows Embedded Standard target. | Issue | Solution | | I cannot discover my target in Measurement & Automation Explorer (MAX) on the host computer. | On the host computer, MAX does not support discovering Windows Embedded Standard targets. | | I cannot discover the target in the LabVIEW Development System using the Add Targets and Devices dialog box. | Ensure that the target meets the requirements necessary to discover a device for remote development:- A user with administrator privileges is logged into the target.
- LabVIEW Remote Development is enabled on the target.
| | I cannot connect to the target in a LabVIEW project, although I can discover the target using the Add Targets and Devices dialog box. | Ensure that the version and bitness of the LabVIEW Run-Time Engine on the target match the version and bitness of the LabVIEW Development System on the host computer. | | How do I verify that LabVIEW Remote Development is enabled on my target? | Launch MAX and select My System in the configuration tree. In the Remote Development Settings section of the System Configuration page, ensure that LabVIEW Remote Development contains a checkmark. | | How do I determine the version of the LabVIEW Run-Time Engine enabled for remote development on the target? | Launch MAX and select My System in the configuration tree. In the Remote Development Settings section of the System Configuration page, refer to the Run-Time Engine Version. Ensure that the version and bitness match the version and bitness of the LabVIEW Development System on the host computer. | | How do I verify that the LabVIEW Remote Development application is running on the target? | Launch the Windows Task Manager. In the Processes page, verify that the list of processes contains niLVRemoteDev.exe. If the list does not contain niLVRemoteDev.exe, you must restart the LabVIEW Remote Development application. | | How do I restart the LabVIEW Remote Development application? | Restart the target or select Start»All Programs»Startup»NI LabVIEW Remote Development. | | Windows Firewall blocked the LabVIEW Remote Development application. What should I do? | You must authorize the LabVIEW Remote Development application to allow access through the Windows Firewall. | | Can I automatically log into the target? | You can configure automatic logon to the target. | | Can I configure remote development settings for my target from the host computer? | From the host computer, you can configure remote development settings by completing the following steps:- On the host computer, open a Web browser and enter the following URL to access the NI Web-Based Monitoring & Configuration page: http://localhost:3582.
- Click Network Browser on the left and double-click the row that contains your target. The NI Web-Based Monitoring & Configuration page for your target opens in a Web browser.
- Click Login in the top-right corner of the page.
- Enter Admin in the User name field.
- Leave the Password field blank. The default password is blank. Set the password to establish security.
- Click OK.
- On the System Configuration page, configure the remote development settings for your target.
- Click Save to save changes.
- Click Restart in the top-right corner of the page to restart the target. You must log into the target for changes to take effect.
|
Known IssuesYou can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in LabVIEW Remote Development Target Support. Accessing the HelpRefer to the Fundamentals»Working with Projects and Targets»Concepts»Working with Windows Embedded Standard Targets topic on the Contents tab of the LabVIEW Help for more information about developing applications on Windows Embedded Standard targets. The LabVIEW Help is accessible by selecting Help»LabVIEW Help from the LabVIEW Development System on the host computer. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important InformationCopyright © 2013 National Instruments. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the \_Legal Information and directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. | 
楼主
