注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
NI Vehicle Communication Measurement and Calibration Toolkit 2024 Q4 Win11 64bitEng 车辆通信测量和校准工具包VCT24.8.0
Vehicle Communication Measurement and Calibration工具包
Vehicle Communication Measurement and Calibration工具包为ECU设计和验证提供NI-XNET设备支持。
Vehicle Communication Measurement and Calibration工具包是Vehicle Communication工具包(NI-VCOM)的软件附加工具。该附加工具可与支持NI-XNET的设备配合使用，帮助您测量和校准用于电子控制单元(ECU)设计和验证的应用程序。通过通用测量与校准协议(XCP)和CAN校准协议(CCP)，您可以将此附加软件与校准数据库文件(A2L)配合使用，以读取和写入内部ECU变量和特性。此外， Vehicle Communication Measurement and Calibration工具包还提供了LabVIEW专用Windows API、C/C++专用Windows API以及Web校准数据库查看器。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vehicle Communication Measurement and Calibration Toolkit 2024 Q4
发布日期：2024/10/8
包含的版本：2024 Q4基本版，完整版，版本号24.8.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2019 64-bit
语言：英文English
应用程序位数：64位
校验和：
文件大小: 1325414400 字节 (1.23 GB)
修改日期: 2024-10-18 09:15
MD5: 7c0e8251f871eec1801ec5c930c30f54
SHA1: 7b4dbfc309d9bbc34ece47488965dfd46f24458d
SHA256: de713cb81cf6c2f96111712bc2fe8f1ef5cbac08f32dcec5facd1f921a8edc05
CRC32: c52133a2
百度网盘与NI官方下载地址：
注册登录视觉论坛账号，购买附件查看下载地址
Vehicle Communication Measurement and Calibration工具包2024Q4.txt
(663 Bytes, 下载次数: 0, 售价: 10 元)
2024Q4未更新自述文件，参考2023Q1版
Vehicle Communication Software Suite 2024 Q3 Changes
Learn about new features, behavior changes, and other updates in Vehicle Communication Software Suite 2024 Q3. Vehicle Communication Toolkit New Features
- Base and Full Versions:
- Adds support for separate activation of the extended CRO (request) and DTO (response) CAN IDs
- Full Version Only:
- Adds support for CAN FD activation in the Measurement and Calibration Toolkit
- Adds support for Toyota OEM-specific Secure Onboard Communication for CAN .dbc files
- Adds support for AUTOSAR E2E Profile 11A and 11C for CAN/CAN-FD, Flexray, Automotive Ethernet, and SOME/IP messages
- Adds support for cyclic transmission mode for Automotive Ethernet and SOME/IP messages
Vehicle Communication Software Suite 2024 Q2 Changes
Vehicle Communication Software Suite 2024 Q2 includes only bug fixes. Refer to the Release Notes for a list of bug fixes.
Related information:
Vehicle Communication Software Suite 2024 Q1 Changes
Learn about new features, behavior changes, and other updates in Vehicle Communication Software Suite 2024 Q1. Vehicle Communication Toolkit New Features
- Base and Full Versions:
- Upgrades supported version of LabVIEW to 2024 Q1
- Upgrades supported version of VeriStand to 2024 Q1
- Adds support for a Bus monitor
- Adds support of byte array data type signals in the NI-VCOM custom device and LabVIEW API
Behavior Changes
- NI-VCOM has a new database viewer for RBS, the Calibration Toolkit, and the Diagnostic Toolkit. The new database viewer allows a more hierarchical and dense view of database content and provides a smoother search experience.
- The Read Signal - State RBS VI in the NI-VCOM LabVIEW API is now named Read (State VCOM).vi. Update the name of the VI if you use this API in your NI-VCOM application.
Vehicle Communication Software Suite 2023 Q3 Changes
Learn about new features, behavior changes, and other updates in Vehicle Communication Software Suite 2023 Q3. Vehicle Communication Toolkit New Features
- Base and Full Versions:
- Adds support for J1939 protocol
- Adds support for CAN and LIN virtual devices
- Adds support for multiple VCOM custom devices, each with unique configurations, in the same VeriStand project containing multiple controllers. Each controller can be associated with one VCOM custom device.
- Adds support for LabVIEW API signal selection in the Read and Write VIs.
- Adds support for deploying configuration files to remote targets from the WebUI rather than manually copying files between machines.
- Adds performance improvements for importing large .arxml files and large numbers of signals.
- Full Version Only:
- Adds support for optional Diagnostic Toolkit
- Adds support for AUTOSAR Global Time Synchronization
Behavior Changes
- The VeriStand Custom Device is now called NI:VCOM rather than Provetech:RBS
- The VeriStand Custom Device API is now located on the NI-VCOM:Restbus simulation palette
- The Measurement and Calibration Toolkit is now configured automatically.
- The VCOM custom device now creates channels that are not scalable by default, but you can set them to be scalable if necessary.
Vehicle Communication Measurement and Calibration Toolkit 2023 Q1 ReadmeMarch 2023 This file contains installation instructions and compatibility information for Vehicle Communication Measurement and Calibration Toolkit 2023 Q1 (Measurement and Calibration Toolkit). You can find more release information on ni.com. - Measurement and Calibration Toolkit Release Notes: Known issues and other notes about this release
- Measurement and Calibration Toolkit Documentation
System Requirements Supported Operating Systems Application Software Support Installation Instructions Product Security and Critical Updates Accessing the Documentation Finding Examples Automating the Installation of NI Products Using NI Software with Microsoft Windows 10
System RequirementsMeasurement and Calibration Toolkit 2023 Q1 has the following requirements: - At least 3 GB of disk space
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for supported LabVIEW versions. Supported Operating SystemsMeasurement and Calibration Toolkit 2023 Q1 supports the following operating system: Measurement and Calibration Toolkit 2023 Q1 supports the following communication buses: - CAN/CAN-FD
- FlexRay
- Automotive Ethernet
Application Software SupportMeasurement and Calibration Toolkit 2023 Q1 supports the following application software versions, including service packs. Application Software | Versions Supported by Measurement and Calibration Toolkit 2023 Q1 | | LabVIEW (32- and 64-bit) | 2020, 2021, 2022, 2023 |
Installation InstructionsYou must install the Vehicle Communication Toolkit before installing the Measurement and Calibration Toolkit. Refer to the Vehicle Communication Toolkit (Full) Readme or the Vehicle Communication Toolkit (Base) Readme for installation instructions. Download the Measurement and Calibration Toolkit installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Documentation for more information about installing, removing, and upgrading NI software using Package Manager. After installing your software, you will need to activate it. Activating your software verifies the licenses associated with your NI account, so you can start using your software. You have different options for activation, based on your software and how it was purchased. Please visit ni.com/activate for more information on activation methods. If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue. Updated LabVIEW Compatibility PolicyThe "Measurement and Calibration Toolkit Support for LabVIEW" package supports applications using the Measurement and Calibration Toolkit with LabVIEW 2020 or later. When installing the Measurement and Calibration Toolkit, this package will be recommended if you have already installed LabVIEW 2020 or later and it installs to the LabVIEW VI library. Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software. Accessing the DocumentationRefer to the Vehicle Communication Toolkit documentation, accessible from ni.com/docs, for information about the Measurement and Calibration Toolkit. Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Measurement and Calibration Toolkit are located in the LabVIEW\examples\Vehicle Communication Measurement and Calibration Toolkit directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create. A demo ECU application for the Measurement and Calibration Toolkit is located in the %Public%\Documents\National Instruments\NI-VCOM\Examples\Measurement and Calibration Toolkit\Demo ECU directory. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager documentation. Using NI Software with Microsoft Windows 10For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
| 
楼主
