add_metrology_object_rectangle2_measureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2Measure (Operator)

Name

add_metrology_object_rectangle2_measureT_add_metrology_object_rectangle2_measureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2Measure — Add a rectangle to a metrology model.

Signature

add_metrology_object_rectangle2_measure( : : MetrologyHandle, Row, Column, Phi, Length1, Length2, MeasureLength1, MeasureLength2, MeasureSigma, MeasureThreshold, GenParamName, GenParamValue : Index)

Description

add_metrology_object_rectangle2_measureadd_metrology_object_rectangle2_measureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2Measure adds a metrology object of type rectangle to a metrology model and prepares the rectangular measure regions. The handle of the model is passed in MetrologyHandleMetrologyHandleMetrologyHandleMetrologyHandlemetrologyHandle.

For an explanation of the concept of 2D metrology see the introduction of chapter 2D Metrology.

The geometric shape of the metrology object of type rectangle is specified by its center (RowRowRowRowrow, ColumnColumnColumnColumncolumn), the orientation of the main axis PhiPhiPhiPhiphi, and the half edge lengths Length1Length1Length1Length1length1 and Length2Length2Length2Length2length2. The input value for PhiPhiPhiPhiphi is mapped automatically to the interval . The rectangular measure regions lie perpendicular to the boundary of the rectangle. The half edge lengths of the measure regions perpendicular and tangential to the boundary of the rectangle are set in MeasureLength1MeasureLength1MeasureLength1MeasureLength1measureLength1 and MeasureLength2MeasureLength2MeasureLength2MeasureLength2measureLength2. The centers of the measure regions lie on the boundary of the rectangle. The parameter MeasureSigmaMeasureSigmaMeasureSigmaMeasureSigmameasureSigma specifies a standard deviation that is used by the operator apply_metrology_modelapply_metrology_modelApplyMetrologyModelApplyMetrologyModelApplyMetrologyModel to smooth the gray values of the image. Salient edges can be selected with the parameter MeasureThresholdMeasureThresholdMeasureThresholdMeasureThresholdmeasureThreshold, which constitutes a threshold on the amplitude, i.e., the absolute value of the first derivative of the edge.

Furthermore, you can adjust some generic parameters within GenParamNameGenParamNameGenParamNameGenParamNamegenParamName and GenParamValueGenParamValueGenParamValueGenParamValuegenParamValue. In particular, all generic parameters that are available in the operator set_metrology_object_paramset_metrology_object_paramSetMetrologyObjectParamSetMetrologyObjectParamSetMetrologyObjectParam can be set. But note that for a lot of applications the default values are sufficient and no adjustment is necessary.

The operator add_metrology_object_rectangle2_measureadd_metrology_object_rectangle2_measureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2Measure returns the index of the added metrology object within the metrology model in the parameter IndexIndexIndexIndexindex.

Execution Information

Multithreading type: reentrant (runs in parallel with non-exclusive operators).
Multithreading scope: global (may be called from any thread).
Processed without parallelization.

This operator modifies the state of the following input parameter:

MetrologyHandleMetrologyHandleMetrologyHandleMetrologyHandlemetrologyHandle

The value of this parameter may not be shared across multiple threads without external synchronization.

Parameters

MetrologyHandleMetrologyHandleMetrologyHandleMetrologyHandlemetrologyHandle (input_control, state is modified) metrology_model → (handle)

Handle of the metrology model.

RowRowRowRowrow (input_control) rectangle2.center.y(-array) → (real / integer)

Row (or Y) coordinate of the center of the rectangle.

ColumnColumnColumnColumncolumn (input_control) rectangle2.center.x(-array) → (real / integer)

Column (or X) coordinate of the center of the rectangle.

PhiPhiPhiPhiphi (input_control) rectangle2.angle.rad(-array) → (real / integer)

Orientation of the main axis [rad].

Length1Length1Length1Length1length1 (input_control) rectangle2.hwidth(-array) → (real / integer)

Length of the larger half edge of the rectangle.

Length2Length2Length2Length2length2 (input_control) rectangle2.hheight(-array) → (real / integer)

Length of the smaller half edge of the rectangle.

MeasureLength1MeasureLength1MeasureLength1MeasureLength1measureLength1 (input_control) number → (real / integer)

Half length of the measure regions perpendicular to the boundary.

Default value: 20.0

Suggested values: 10.0, 20.0, 30.0

Typical range of values: 1.0 ≤ MeasureLength1 MeasureLength1 MeasureLength1 MeasureLength1 measureLength1

Minimum increment: 1.0

Recommended increment: 10.0

Restriction: MeasureLength1 < Length1 && MeasureLength1 < Length2

MeasureLength2MeasureLength2MeasureLength2MeasureLength2measureLength2 (input_control) number → (real / integer)

Half length of the measure regions tangetial to the boundary.

Default value: 5.0

Suggested values: 3.0, 5.0, 10.0

Typical range of values: 1.0 ≤ MeasureLength2 MeasureLength2 MeasureLength2 MeasureLength2 measureLength2

Minimum increment: 1.0

Recommended increment: 10.0

MeasureSigmaMeasureSigmaMeasureSigmaMeasureSigmameasureSigma (input_control) number → (real / integer)

Sigma of the Gaussian function for the smoothing.

Default value: 1.0

Suggested values: 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0

Typical range of values: 0.4 ≤ MeasureSigma MeasureSigma MeasureSigma MeasureSigma measureSigma

Minimum increment: 0.01

Recommended increment: 0.1

Restriction: 0.4 <= MeasureSigma && MeasureSigma <= 100

MeasureThresholdMeasureThresholdMeasureThresholdMeasureThresholdmeasureThreshold (input_control) number → (real / integer)

Minimum edge amplitude.

Default value: 30.0

Suggested values: 5.0, 10.0, 20.0, 30.0, 40.0, 50.0, 60.0, 70.0, 90.0, 110.0

Typical range of values: 1 ≤ MeasureThreshold MeasureThreshold MeasureThreshold MeasureThreshold measureThreshold ≤ 255 (lin)

Minimum increment: 0.5

Recommended increment: 2

GenParamNameGenParamNameGenParamNameGenParamNamegenParamName (input_control) attribute.name-array → (string)

Names of the generic parameters.

Default value: []

List of values: 'distance_threshold'"distance_threshold""distance_threshold""distance_threshold""distance_threshold", 'instances_outside_measure_regions'"instances_outside_measure_regions""instances_outside_measure_regions""instances_outside_measure_regions""instances_outside_measure_regions", 'max_num_iterations'"max_num_iterations""max_num_iterations""max_num_iterations""max_num_iterations", 'measure_distance'"measure_distance""measure_distance""measure_distance""measure_distance", 'measure_interpolation'"measure_interpolation""measure_interpolation""measure_interpolation""measure_interpolation", 'measure_select'"measure_select""measure_select""measure_select""measure_select", 'measure_transition'"measure_transition""measure_transition""measure_transition""measure_transition", 'min_score'"min_score""min_score""min_score""min_score", 'num_instances'"num_instances""num_instances""num_instances""num_instances", 'num_measures'"num_measures""num_measures""num_measures""num_measures", 'rand_seed'"rand_seed""rand_seed""rand_seed""rand_seed"

GenParamValueGenParamValueGenParamValueGenParamValuegenParamValue (input_control) attribute.value-array → (real / integer / string)

Values of the generic parameters.

Default value: []

Suggested values: 1, 2, 3, 4, 5, 10, 20, 'all'"all""all""all""all", 'true'"true""true""true""true", 'false'"false""false""false""false", 'first'"first""first""first""first", 'last'"last""last""last""last", 'positive'"positive""positive""positive""positive", 'negative'"negative""negative""negative""negative", 'uniform'"uniform""uniform""uniform""uniform", 'nearest_neighbor'"nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor", 'bilinear'"bilinear""bilinear""bilinear""bilinear", 'bicubic'"bicubic""bicubic""bicubic""bicubic"

IndexIndexIndexIndexindex (output_control) integer → (integer)

Index of the created metrology object.

Result

If the parameters are valid, the operator add_metrology_object_rectangle2_measureadd_metrology_object_rectangle2_measureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2MeasureAddMetrologyObjectRectangle2Measure returns the value 2 (H_MSG_TRUE). If necessary, an exception is raised.