set_generic_shape_model_param — Set selected parameters of the shape model.
set_generic_shape_model_param( : : ModelID, GenParamName, GenParamValue : )
The operator set_generic_shape_model_param sets the parameters
GenParamName of the shape model ModelID to the values
given in GenParamValue.
Various aspects of the matching process can be controlled by the parameters
that can be selected by GenParamName.
In the descriptions below they are grouped into the following
categories (where the category represents the main purpose but not
necessarily the only purpose of the parameter listed within):
Modify the Instance
Sort out Found Matches
Gray Value Treatment
Refinement
Image Pyramid
Clutter
Regarding the Output
In the following we list the settable parameters for the different categories and specify cases in which parameter values are modified automatically.
In this paragraph we list and explain parameters modifying the model
ModelID itself.
Changing a corresponding value makes it necessary to train the adjusted model
before the matching (see train_generic_shape_model).
The supported parameters GenParamName are:
The contrast is a measure for local gray value differences that are used to distinguish the object from the background or different parts of the object from each other. For the model only those pixels are selected which show the asked contrast, i.e., gray value difference to neighboring pixels. This asked contrast can be a simple threshold or a hysteresis threshold, depending on the values set for 'contrast_low' and 'contrast_high':
Simple threshold:
Both are set to the same value which is not 'auto'.
One of the parameters is set to 'auto' while the other one is set to an other value.
Hysteresis threshold:
Both are set to different values which are both not 'auto'.
Both are set to 'auto'.
In these cases the model is segmented using a method similar to the
hysteresis threshold method used in edges_image.
For more information about the hysteresis
threshold method, see hysteresis_threshold.
Note, such a contrast is not used in case of training with XLD.
For more information about contrast and its impact on shape model matching,
we refer to the “Solution Guide II-B - Matching”.
In certain cases, it might happen that the automatic determination of
the contrast thresholds is not sufficient. For example, a manual setting
of these parameters should be preferred if certain model components should
be included or suppressed due to application-specific reasons or if the
object features several different contrasts. The contrast
thresholds should be verified using inspect_shape_model before
calling train_generic_shape_model.
'contrast_high':
Determines together with 'constrast_low' the gray value difference a pixel must have to be considered as being part of the model, see the explanation above. In case of a hysteresis threshold this parameter sets the maximum.
Possible values: 'auto', 90, 80.
Restriction: Not used in case of training with XLD.
Default: 'auto'.
'constrast_low': Determines together with 'constrast_high' the gray value difference a pixel must have to be considered as being part of the model, see the explanation above. In case of a hysteresis threshold this parameter sets the minimum. Possible values: 'auto', 10, 20.
Restriction: Not used in case of training with XLD.
Default: 'auto'.
Shape models are created with a rotation range starting at 0 and ending at 6.28 (=), which can be restricted during the search. The search space, thus discretization steps for the angles can be modified using:
'angle_step':
Determines the step length within the selected range of angles.
Its value should be chosen based on the size of the object.
Smaller models do not have many different discrete rotations in the image,
and hence it is recommended to choose larger values for smaller models.
If set to 'auto', its value is estimated during the call
of train_generic_shape_model.
The set value is clipped to a maximal value of 0.20
(=).
Suggested values: 'auto', 0.1, 0.2.
Note: Modifications necessitate a model training.
Default: 'auto'.
The search space, thus discretization steps for the scaling can be modified using scaling parameters. Which ones can be set depends on the type of scaling, see the overview in the following table. A scaling value of 1.0 corresponds to the original size of the model in the according direction.
GenParamName |
isotropic scaling | anisotropic scaling |
| 'iso_scale_max' | x | |
| 'iso_scale_min' | x | |
| 'iso_scale_step' | x | |
| 'scale_row_max' | x | |
| 'scale_row_min' | x | |
| 'scale_row_step' | x | |
| 'scale_column_max' | x | |
| 'scale_column_min' | x | |
| 'scale_column_step' | x |
'iso_scale_max':
Determines the maximum of the range of possible isotropic scaling for which the model is searched.
Suggested values: 1.0, 1.1, 1.2.
Default: 1.0.
'iso_scale_min': Determines the minimum of the range of possible isotropic scaling for which the model is searched.
Suggested values: 1.0, 0.9, 0.8.
Default: 1.0.
'iso_scale_step': Determines the step length within the
selected range of isotropic scales.
The value 'auto' means its value is estimated during the call
of train_generic_shape_model.
'scale_row_max': Determines the maximum of the range of possible scaling in row direction for which the model is searched.
Suggested values: 1.0, 1.1, 1.2.
Default: 1.0.
'scale_row_min': Determines the minimum of the range of possible scaling in row direction for which the model is searched.
Suggested values: 1.0, 0.9, 0.8.
Default: 1.0.
'scale_row_step': Determines the step length within the
selected range of scales in row direction.
The value 'auto' means its value is estimated during the call
of train_generic_shape_model.
'scale_column_max': Determines the maximum of the range of possible scaling in column direction for which the model is searched.
Suggested values: 1.0, 1.1, 1.2.
Default: 1.0.
'scale_column_min': Determines the minimum of the range of possible scaling in column direction for which the model is searched.
Suggested values: 1.0, 0.9, 0.8.
Default: 1.0.
'scale_column_step': Determines the step length within the
selected range of scales in column direction.
The value 'auto' means its value is estimated during the call
of train_generic_shape_model.
'metric':
Determines the conditions under which the model is recognized in the image. Supported values for 'metric' are:
'auto': The value is determined during the call
of train_generic_shape_model depending if the training is done
using an image ('use_polarity') or XLDs
('ignore_local_polarity').
'use_polarity': An instance in the image and the model must have the same contrast.
Restriction: Only applied to single-channel images. In case of multichannel images, only the first channel is used (without error message).
Example: The model has been created with a bright object on a dark background. Only instances are found if they are also brighter than the background.
'ignore_global_polarity':
An instance is found in the
image also if the contrast reverses globally.
This mode increases the runtime of find_generic_shape_model
slightly compared to 'use_polarity'.
Restriction: Only applied to single-channel images. In case of multichannel images, only the first channel is used (without error message).
Example: The model has been created with a bright object on a dark background. Instances are found if they are brighter or darker than the background.
'ignore_local_polarity':
An instance is found even if the contrast changes locally.
This mode increases the runtime of find_generic_shape_model
significantly compared to 'use_polarity'.
It is usually recommendable to create several models that reflect the possible contrast variations of the object and to match them simultaneously.
Restriction: Only applied to single-channel images. In case of multichannel images, only the first channel is used (without error message).
Example: The model or instance contains a part with medium gray values, within which either darker or brighter sub-objects may lie.
'ignore_color_polarity':
An instance is found even if the color contrast changes locally.
This mode can increase the runtime of find_generic_shape_model
significantly compared to 'use_polarity'.
This metric can be used for images of an arbitrary number of channels,
which do not need to contain a spectral subdivision of the light
(like in an RGB image).
For single-channel images it has the same effect as
'ignore_local_polarity'.
The number of channels is allowed to differ from the traininig
with train_generic_shape_model to the
search with find_generic_shape_model.
Example: Instances are found even if parts of the object can change their color, e.g., from red to green.
Restriction: Using XLDs, resetting the metric requires that
the edge-direction information is available as XLD contour attribute.
For more information see set_shape_model_metric.
Default: 'auto'.
'min_size':
Determines the minimum number of points a model
component must have in order to be considered. Thus, components having
fewer points than 'min_size' are suppressed.
As 'min_size' is applied on the extent of the components, the
derived model contours can still be smaller than the specified minimum
size. This threshold for the minimum size is divided by two for each
successive pyramid level.
The effect of this parameter can be checked in advance with
inspect_shape_model.
If set to 'auto', its value is estimated during the call
of train_generic_shape_model.
Restriction: Not used in case of training with XLD.
Default: 'auto'.
'optimization':
Determines the number of points by which the model is reduced. This reduction can be useful for particularly large models. Possible values:
'auto': The number of points is automatically determined
by train_generic_shape_model.
'none': All model points are stored.
A given number: Number of points by which the model is reduced. In this case it may be necessary to set the parameter 'greediness' to a smaller value, e.g., 0.7 or 0.8.
Note, for small models reducing the number of model points usually does not speed up the search as more potential instances will be examined.
Default: 'auto'.
'num_levels':
Number of considered image pyramid levels.
Its value must be chosen such that the model is still recognizable and
contains a sufficient number of points (at least four) on the highest
pyramid level.
This can be checked using the output of inspect_shape_model.
It is advisable to set a value as large as possible as it reduces the
runtime to find an instance significantly.
If set to 'auto', its value is estimated during the call
of train_generic_shape_model.
It can happen that the automatically determined value does not suit.
If the number of pyramid levels is chosen too large, the model may not be
recognized in the image or only with very low values for the parameters
'min_score' or 'greediness'.
If the number of pyramid levels is chosen too small, the time required
to find the model in find_generic_shape_model may increase.
In both cases, the number of pyramid levels should be selected
using the output of inspect_shape_model.
Default: 'auto'.
'model_identifier':
Overwrites the current identifier string with GenParamValue.
The given identifier should be unique to avoid ambiguities
at e.g., a later match retrieval with
get_generic_shape_model_result.
Restriction: 'model_identifier' must be a non-emtpy string. The following words are reserved and cannot be used as identifier names: 'all', 'best'.
Default: The string which is automatically set at the shape model creation.
In this paragraph we list parameters modifying the search of a
ModelID.
Modifying these parameters do not necessitate a model training,
except they are set from a not-estimated value to a value leading to an
automatic estimation during train_generic_shape_model.
The descriptions of these parameters contain a corresponding note.
The supported parameters GenParamName are:
Modify the Instance
'angle_start':
Determines the start of the range of possible rotations for which the model is searched.
Suggested values: 0.0, -3.14, 3.14.
Default: 0.0.
'angle_end' Determines the end of the range of possible rotations for which the model is searched.
Suggested values: 0.0, 3.14, 6.28.
Default: 6.28 (= ).
Example: 'angle_start' = '-rad(10)', 'angle_end' = 'rad(10)' searches for matches in the range from [rad(350), rad(360)] to [0, rad(10)].
The scaling range specified for the model can be restricted further. For these parameters the value 'auto' means that they do not restrict the according range.
GenParamName |
isotropic scaling | anisotropic scaling |
| 'restrict_iso_scale_max' | x | |
| 'restrict_iso_scale_min' | x | |
| 'restrict_scale_row_max' | x | |
| 'restrict_scale_row_min' | x | |
| 'restrict_scale_column_max' | x | |
| 'restrict_scale_column_min' | x |
'restrict_iso_scale_max':
Determines a possibly restricted maximum of the range of possible scaling for which the model is searched.
Suggested values: 'auto', 1.1, 1.2.
Default: 'auto'.
'restrict_iso_scale_min':
Determines a possibly restricted minimum of the range of possible scaling for which the model is searched.
Suggested values: 'auto', 0.9, 0.8.
Default: 'auto'.
'restrict_scale_row_max':
Determines a possibly restricted maximum of the range of possible scaling in row direction for which the model is searched.
Suggested values: 'auto', 1.1, 1.2.
Default: 'auto'.
'restrict_scale_row_min':
Determines a possibly restricted minimum of the range of possible scaling in row direction for which the model is searched.
Suggested values: 'auto', 0.9, 0.8.
Default: 'auto'.
'restrict_scale_column_max':
Determines a possibly restricted maximum of the range of possible scaling in column direction for which the model is searched.
Suggested values: 'auto', 1.1, 1.2.
Default: 'auto'.
'restrict_scale_column_min':
Determines a possibly restricted minimum of the range of possible scaling in column direction for which the model is searched.
Suggested values: 'auto', 0.9, 0.8.
Default: 'auto'.
'max_deformation':
Determines by how much an object is allowed to deviate from the model in order to be considered as a match. The maximal allowable object deformation is specified in pixels. A value of 0 means no deformation is allowed during the search.
Example: An object with a shape deformed by up to 2 pixels with respect to the shape of the model can be found with 'max_deformation' = 2.
Increasing the value for 'max_deformation' often results in an increased runtime.
Furthermore, increasing the value for 'max_deformation' increases the risk of obtaining unwanted matches. This is especially the case for small objects or objects with fine structures because they lose their characteristic shape, which is important for a robust search.
Interplay with 'subpixel': When deformation is allowed (thus, a value larger 0 is set), the score computation depends on the possible subpixel refinement. In most cases the score changes if a least-squares adjustment is set. Using an adjustment the score might increase when increasing the maximum deformation because then for the model points more corresponding image points can be found.
Default: 0.
Sort out Found Matches
'min_score':
Determines the minimum score a potential match
must have to be regarded as model instance in the image.
The larger 'min_score' is chosen, the faster is the search.
If the model can be expected never to be occluded in the images,
'min_score' may be set as high as 0.8 or even
0.9.
If the matches are not tracked to the lowest pyramid level during
find_generic_shape_model it might happen that instances with
a score slightly below 'min_score' are returned.
The interplay with 'num_matches' is explained in the description of the latter one.
Default: 0.5.
'num_matches':
Determines the maximum number of returned instances.
The value 'all' (or 0) mean that every instance whose score is higher than 'min_score' is returned. For the rest the interplay between 'num_matches' and 'min_score' as well as 'max_clutter' (if set) is as follows:
No clutter set:
In case there are more than 'num_matches' instances found with a required score, only the 'num_matches' instances with the highest scores are returned.
In case there are less than 'num_matches' instances found with a required score, only the instances fulfilling the score requirement are returned.
With clutter set:
In case there are more than 'num_matches' instances found with a required score and an allowed clutter score, only the 'num_matches' instances with the best clutter score are returned.
In case there are less than 'num_matches' instances found with a required score and / or allowed clutter score, only the instances fulfilling the score and clutter score requirement are returned.
Tracking matches through the image pyramid depends whether clutter is set:
No clutter set:
On each level less promising matches are rejected based on 'num_matches'. By doing so matches may be rejected although they would have obtained a higher score on the lowest pyramid level. As a result the returned instance for e.g., 'num_matches' set to 1 can differ from the instance with the highest score returned when more matches are returned by setting 'num_matches' to 'all' or a value higher 1. This explains why it might be preferable to return several instances and then select the instance with the highest score in case multiple objects with a similar score are expected, but only the one with the highest score is of interest.
With clutter set:
No matches are rejected during tracking. As a result the runtime using clutter parameters will be at least as high as the runtime without clutter parameters but returning all matches, thus 'num_matches' set to 'all'.
Default: 'all'.
'strict_boundaries':
Determines whether found instances are only returned when they are strictly within the given search space boundaries ('true') or not ('false'). Note that such a sort out appears after the reduction to the desired 'num_matches' matches and as a consequence may lead in extreme cases to no returned match.
Compatibility: Setting this value on a model not created by
create_generic_shape_model will change internal model settings.
As a consequence, setting for such models 'strict_boundaries'
to 'true' and back to 'false' may result in a
different behavior regarding matches found outside the requested search
range.
Default: 'false'.
'max_overlap':
Determines by what fraction two instances
may overlap at most in order to be considered as different instances
and hence to be returned separately.
If two instances overlap each other by
more than 'max_overlap' only the one with the higher score is
returned.
The calculation of the overlap is based on the smallest enclosing
rectangle of arbitrary orientation (see smallest_rectangle2)
of the found instances.
'max_overlap' set to 0 means the returned instances
may not overlap at all, while for 'max_overlap' = 1
all instances are returned, independent of possible overlapping.
For more information about 'max_overlap', we refer to the
“Solution Guide II-B - Matching”.
Restriction: 0 'max_overlap' 1.
Default: 0.5.
'max_clutter':
Determines the maximal clutter score a potential match can have to be regarded as model instance in the image. Of course this applies only to models where clutter is considered, thus 'use_clutter' is set to 'true'.
Default: 0.0.
Gray Value Treatment
'min_contrast':
Determines the minimal contrast
(gray value difference to neighboring pixels) a point in a search image
must at least have in order to be compared with the model.
The main use of this parameter is to exclude noise,
from the matching process. The operator estimate_noise can be
used to assess the noise.
Example: The gray values fluctuate within a range of 10 gray levels. In this case it is advisable to set 'min_contrast' = 10.
Multichannel images: For a search in a multichannel image using 'metric' set to 'ignore_color_polarity', the noise in one channel must be multiplied by the square root of the number of channels to determine 'min_contrast'.
Example: The gray values of a 3 channel image fluctuate within a range of 10 gray levels in a single channel. In this case it is advisable to set 'min_contrast' = 17.
Note, 'min_contrast' must be smaller than the contrast threshold set using 'contrast_low' and 'contrast_high', see above.
The value 'auto' means its value is estimated during the call
of train_generic_shape_model based on the noise in the model
image.
Consequently, for a meaningful automatic determination the noise in the
model image must be similar to the one in the images used during
recognition.
Training: Changing this value to 'auto' necessitates a training of the shape model.
Possible values: 'auto', 10, 20.
Default: 'auto'.
'border_shape_models':
Determines whether the shape model ModelID to be found with,
e.g., find_generic_shape_model, may lie partially outside
the image (i.e., whether it may cross the image border, independent of
the domain).
The value 'system' means the model uses the system-wide set
value set by set_system for the parameter
'border_shape_models'.
List of values: 'system', 'true', 'false'.
Default: 'system'.
Refinement
'subpixel':
Determines which type of subpixel refinement should be carried out. Possible values:
'none': The pose of the model is only determined with pixel accuracy and the angle resolution that was specified with 'angle_step'.
'interpolation': The pose of the model is interpolated from the score function. This mode features very low computation costs.
'least_squares': The pose of the model is refined using least squares adjustment, i.e., by minimizing the distances of the model points to their corresponding image points.
'least_squares_high': The pose of the model is refined using least squares adjustment, i.e., by minimizing the distances of the model points to their corresponding image points. More minimization iterations are allowed than for 'least_squares', resulting in a possibly increased runtime.
'least_squares_very_high': The pose of the model is refined using least squares adjustment, i.e., by minimizing the distances of the model points to their corresponding image points. More minimization iterations are allowed than for 'least_squares_high', resulting in a possibly increased runtime.
The interplay with 'max_deformation' is explained in the description of latter one.
Default: 'least_squares'.
'greediness':
Determines how “greedily” the search should be carried out. A higher value results in a faster search but a less safe search heuristic.
Restriction: 0 'greediness' 1.
Default: 0.9.
Image Pyramid
'pyramid_level_highest':
Determines the highest level of the image pyramid used in the search. This allows to lower the highest image pyramid level set by the model uses during a search. Its value can not be higher than the highest image pyramid level of the model, which is set through 'num_levels'. As a consequence, 'pyramid_level_highest' is clipped. The value 'auto' means no lowering is applied, thus the model uses the highest pyramid level set through 'num_levels'.
Default: 'auto'.
'pyramid_level_lowest':
Determines the lowest level of the image pyramid to which the found matches are tracked. Not tracking the matches down to the lowest level decreases the runtime of the search. But in general the higher the lowest level, the lower the accuracy of the extracted pose parameters. In extreme cases this can even lead to finding wrong instances of that the desired accuracy cannot be achieved.
Default: 1.
'pyramid_level_robust_tracking':
Determines whether the so-called “increased tolerance mode” is active ('true') or not ('false'). In this mode the lowest image pyramid level on which at least one match can be found is automatically determined during the search. This mode can be helpful in case of input images of poor quality, e.g., defocused, deformed, or noisy images. In such cases the edge information on the lowest image pyramid level may be missing or deformed and as a consequence no instances of the shape model can be found. Nevertheless, the edge information may be sufficient on higher pyramid levels. The selection of the suitable pyramid level, i.e., the lowest pyramid level on which at least one instance of the shape model can be found, depends on the model and on the input image. Of course the restrictions on accuracy and robustness mentioned for 'pyramid_level_lowest' occur. Example: 'pyramid_level_highest' is set to 4, 'pyramid_level_lowest' is set to 2, and 'pyramid_level_robust_tracking' is set to 'true'. Now the matching starts at the fourth pyramid level and tracks the matches down to the second lowest pyramid level. If no instance of the model can be found on the pyramid level 2, but matches have been obtained at a higher level, the lowest pyramid level is determined on which at least one instance of the model is found. The instances of this pyramid level will then be returned.
Default: 'false'.
Clutter
'use_clutter':
Determines whether the model ModelID
considers clutter parameters ('true') or not ('false').
The runtime using clutter parameters will be at least as high as the
runtime without clutter parameters but returning all matches, thus
'num_matches' set to 'all'.
List of values: 'false', 'true'.
Default: 'false'.
'clutter_contrast':
Determines the minimal contrast which edges in the clutter region must have in order to be counted as clutter.
The polarity of the found clutter edges is ignored, i.e., bright objects on a dark background will yield the same clutter score as dark objects on a bright background, independent of the parameter 'metric' of the shape model.
For the value 'auto' the contrast will be estimated automatically. Note, a suitable estimation requires that the defining region is representative. We recommend to check if the estimated value is suitable and adapt it otherwise.
Please note that clutter scores are strongly affected by illumination variations.
Possible values: 'auto', 5, 10.
Restriction: 'clutter_contrast' must be larger or equal to 'min_contrast'.
Default: 'auto'.
Attention: A suitable automatic estimation is not possible for shape models generated from XLD contours. Therefore, in such a case the estimated value is set to 'min_contrast', see also the section Äutomatic modifications" below.
'max_clutter':
The value 'max_clutter' specifies the maximum clutter score that a match can have in order to be accepted.
Note, the value of this parameter has no effect on the runtime.
Value range: [0.0, 1.0].
Default: 0.0.
'clutter_hom_mat_2d':
The clutter region is set relative to the model.
The transformation matrix 'clutter_hom_mat_2d' maps
the model origin to the position of the model instance
(or rather its center of gravity)
in the image when the clutter region has been set using
set_generic_shape_model_object.
Possible values:
'auto': Value is estimated automatically.
The clutter region is set relative to the model in the template image
used by set_generic_shape_model_object.
Transformation matrix: Transformation is given by the user.
Default: 'auto'.
'clutter_border_mode':
With 'clutter_border_mode' the behavior of the clutter score can be influenced in cases where the clutter region of a found match is not entirely contained in the image domain. The corresponding values for 'clutter_border_mode' are:
'clutter_border_average':
When 'clutter_border_average' is set, the hidden part of the clutter region is assumed to be filled on average as is its visible part. If the clutter region is not visible at all, the clutter score of the found match is set to 0.0.
'clutter_border_empty':
When 'clutter_border_empty' is set, the clutter region is assumed to be clutter-free where it is not visible.
Note that 'clutter_border_average' results in higher clutter values than 'clutter_border_empty'.
List of values: 'clutter_border_average', 'clutter_border_empty'.
Default: 'clutter_border_average'.
Regarding the Output
Origin:
The origin (reference point) is specified relative to the center of
gravity of the domain (region) of the image that was used to train the
shape model with train_generic_shape_model.
Hence, an origin of (0,0) means that the center of gravity of the domain
of the template image is used as the origin.
The origin can be set to a new value using the following parameters:
'origin_row': Determines the column coordinate of a new, shifted center of origin.
Default: 0.
'origin_column': Determines the column coordinate of a new, shifted center of origin.
Default: 0.
Example: Setting 'origin_column' = -20 and 'origin_row' = -40 results in a new origin lying in the upper left of the center of gravity of the model. Please note that changing the origin influences the used transformation matrices, i.e., the 'clutter_hom_mat_2d' set by the user and the calculated 'hom_mat_2d' of a match.
'prepare_contours_for_visualization'
Determines whether a found contour of a match should be prepared in
find_generic_shape_model and returned in
'MatchResultID' ('true') or not ('false').
Deactivating 'prepare_contours_for_visualization' decreases the
runtime.
For how to query the generated contour, see the documentation of
get_generic_shape_model_result_object.
List of values: 'true', 'false'.
Default: 'true'.
'prepare_clutter_region_for_visualization'
Determines whether the clutter region of a match should be prepared in
find_generic_shape_model and returned in
'MatchResultID' ('true') or not ('false').
Deactivating 'prepare_clutter_region_for_visualization'
decreases the runtime.
For how to query the generated clutter region, see the documentation of
get_generic_shape_model_result_object.
List of values: 'true', 'false'.
Default: 'true'.
In this paragraph we list parameters concerning technical influences when
searching the model ModelID.
Supported GenParamName are:
'model_cache':
Determines whether an internal
cache based on temporary memory is used ('true') or not
'false' during e.g., find_generic_shape_model.
Switching the 'model_cache' off (by setting 'false')
sometimes results in slightly longer execution times but constantly
smaller memory footprint.
The size of the cache depends on the search space, thus if the search
space contains many discretization steps.
This means a fine search grid with small step values covering
large ranges for start to end values results in a large
memory consumption.
Default: 'true'.
'timeout':
Determines the maximum runtime of the operators
used to find the shape model ModelID
(e.g., find_generic_shape_model).
The temporal accuracy depends on several factors including the size of
the model, the speed of the used computer, and the 'timer_mode'
set via set_system.
Be aware that the runtime of the search increases by up to 10 percent with
activated timeout.
The value for 'timeout' must be given in milliseconds. To disable the timeout you can either use a negative value or 'false'.
Possible values: 'false', -1, 100.
Default: 'false'.
The following parameters are subject to automatic modifications without further notice:
'num_levels':
If a number of levels is set such that on the asked levels not enough model points are generated, the number of pyramid levels is reduced internally until enough model points are found on the highest pyramid level.
If this procedure would lead to a model with no pyramid levels, i.e.,
if the number of model points is already too small on the lowest pyramid
level, train_generic_shape_model returns with an error message.
Parameters determining a step_size:
In case the range is not a multiple of the step_size, latter one is modified accordingly.
Examples: 'angle_step', 'iso_scale_step'.
start and end value of a specified range:
To ensure that for model instances in the exact model position are
returned by find_generic_shape_model, ranges may modified as
follows:
If there is no positive integer value n such that the start value
plus n times the step_size gives 0.0 (for angles) and
1.0 (for scalings), respectively, the start value is decreased by
up to one step_size and the end value increased such that
the total range is increased by exactly
one step_size.
Examples: 'angle_start', 'restrict_iso_scale_max'.
'clutter_hom_mat_2d': Changing the origin ('origin_row' and 'origin_column') influences the used transformation matrices, i.e., the 'clutter_hom_mat_2d' set by the user.
'clutter_contrast': If 'min_contrast' is changed such that it gets bigger than 'clutter_contrast', 'clutter_contrast' is increased if the user set the value 'auto'.
Note that the transformations are treated internally such that the scalings are applied first, followed by the rotation. Therefore, the model should usually be aligned such that it appears horizontally or vertically in the model image.
This operator modifies the state of the following input parameter:
During execution of this operator, access to the value of this parameter must be synchronized if it is used across multiple threads.
ModelID (input_control, state is modified) shape_model → (handle)
Handle of the shape model.
GenParamName (input_control) attribute.name-array → (string)
Parameter name.
Default value: 'min_score'
List of values: 'angle_end', 'angle_start', 'angle_step', 'border_shape_models', 'clutter_border_mode', 'clutter_contrast', 'clutter_hom_mat_2d', 'contrast_high', 'contrast_low', 'greediness', 'iso_scale_max', 'iso_scale_min', 'iso_scale_step', 'max_clutter', 'max_deformation', 'max_overlap', 'metric', 'min_contrast', 'min_score', 'min_size', 'model_cache', 'model_identifier', 'num_levels', 'num_matches', 'optimization', 'origin_column', 'origin_row', 'prepare_clutter_region_for_visualization', 'prepare_contours_for_visualization', 'pyramid_level_highest', 'pyramid_level_lowest', 'pyramid_level_robust_tracking', 'restrict_iso_scale_max', 'restrict_iso_scale_min', 'restrict_scale_column_max', 'restrict_scale_column_min', 'restrict_scale_row_max', 'restrict_scale_row_min', 'scale_column_max', 'scale_column_min', 'scale_column_step', 'scale_row_max', 'scale_row_min', 'scale_row_step', 'strict_boundaries', 'subpixel', 'timeout', 'use_clutter'
GenParamValue (input_control) attribute.value-array → (real / integer / string)
Parameter value.
Default value: 0.5
Suggested values: -3.14, -1.57, -0.79, -0.39, 0.0, 0.39, 0.79, 1.57, 3.14
If the parameters are valid, the operator
set_generic_shape_model_param returns the value TRUE.
If necessary an exception is raised.
get_generic_shape_model_param,
train_generic_shape_model,
find_generic_shape_model
Matching