draw_xld_modT_draw_xld_modDrawXldModDrawXldModdraw_xld_mod (Operator)

Name

draw_xld_modT_draw_xld_modDrawXldModDrawXldModdraw_xld_mod — Interactive modification of a contour.

Signature

draw_xld_mod(ContIn : ContOut : WindowHandle, Rotate, Move, Scale, KeepRatio, Edit : )

Description

draw_xld_moddraw_xld_modDrawXldModDrawXldModdraw_xld_mod returns a contour, which has been interactively modified by the user in the window.

You can modify the contour in two ways: by editing the contour itself, e.g., by inserting or moving contour points, or by transforming the contour as a whole, e.g., by rotating moving or scaling it. Note that you can only edit a contour if EditEditEditeditedit is set to 'true'"true""true""true""true". Similarly, you can only rotate, move or scale it if RotateRotateRotaterotaterotate, MoveMoveMovemovemove, and ScaleScaleScalescalescale, respectively, are set to 'true'"true""true""true""true".

draw_xld_moddraw_xld_modDrawXldModDrawXldModdraw_xld_mod starts in the transformation mode. In this mode, the contour is displayed together with 3 symbols: a cross in the middle and an arrow to the right if RotateRotateRotaterotaterotate is set to 'true'"true""true""true""true", and a double-headed arrow to the upper right if ScaleScaleScalescalescale is set to 'true'"true""true""true""true". To switch into the edit mode, press the Shift key; by pressing it again, you can switch back into the transformation mode.

Transformation Mode

In this mode a contour can be rotated, moved and scaled, as long as the respective parameter RotateRotateRotaterotaterotate, MoveMoveMovemovemove and ScaleScaleScalescalescale are set to 'true'"true""true""true""true". The contour is displayed along with a cross in its center, an arrow pointing to the right (if RotateRotateRotaterotaterotate is set to 'true'"true""true""true""true"), and a double arrow (if ScaleScaleScalescalescale is set to 'true'"true""true""true""true").

To move the contour, click with the left mouse button on the cross in the center and then drag it to the new position, i.e., keep the mouse button pressed while moving the mouse.
To rotate it, click with the left mouse button on the arrow and then drag it, till the contour has the right direction.
Scaling is achieved by dragging the double arrow. To keep the ratio the parameter KeepRatioKeepRatioKeepRatiokeepRatiokeep_ratio has to be set to 'true'"true""true""true""true".

Edit Mode

In this mode, the contour is display together with 5 pick points, which are located in the middle and at the corners of the surrounding rectangle. If the contour is closed, the pick points are displayed as squares, otherwise shaped like a 'u'. By clicking on a pick point, you can close an open contour and vice versa. Depending on the state of the contour, you can perform different modifications. Open contours (pick points shaped like a 'u')

To append points, click with the left mouse button in the window and a new point is added at this position.
You can delete the point appended last by pressing the Ctrl key.
To move or insert points, you must first close the contour by clicking on one of the pick points.

Closed contours (square pick points)

To move a point, click with the left mouse button on a point marked by a rectangle and then drag it to the new position.
To insert a point, click with the left mouse button in the vicinity of a line and then move the mouse to the position where you want the new point to be placed.
To delete a point, select the point which should be deleted with the left mouse button and then press the Ctrl key.

Pressing the right mouse button terminates the procedure.

Attention

If used in a buffer window, mouse events have to be supplied by the application, while the draw operator must be run in another thread.

Execution Information

Multithreading type: reentrant (runs in parallel with non-exclusive operators).
Multithreading scope: global (may be called from any thread).
Processed without parallelization.

Parameters

ContInContInContIncontIncont_in (input_object) xld_cont → object

Input contour.

ContOutContOutContOutcontOutcont_out (output_object) xld_cont → object

Modified contour.

WindowHandleWindowHandleWindowHandlewindowHandlewindow_handle (input_control) window → (handle)

Window handle.

RotateRotateRotaterotaterotate (input_control) string → (string)

Enable rotation?

Default: 'true' "true" "true" "true" "true"