edges_color_sub_pix — Extract subpixel precise color edges using Deriche, Shen, or Canny filters.
edges_color_sub_pix extracts subpixel precise color edges
from the input image Image. The definition of color edges
is given in the description of edges_color. The same edge
filters as in edges_color can be selected: 'canny',
'deriche1', 'deriche2', and 'shen'. In
addition, a fast Sobel filter can be selected with
'sobel_fast'. The filters are specified by the parameter
Filter.
The “filter width” (i.e., the amount of smoothing) can be chosen
arbitrarily. For a detailed description of this parameter see
edges_color. This parameter is ignored for Filter
= 'sobel_fast'.
The extracted edges are returned as subpixel precise XLD contours in
Edges. For all edge operators except for
'sobel_fast', the following attributes are defined for each
edge point (see get_contour_attrib_xld for further information):
'edge_direction': Gives the direction of the edge (not of the XLD contour), calculated from the image gradients in horizontal and vertical direction. The angles [rad] are given with respect to the column axis of the image.
'angle': Direction of the normal vectors to the contour in radians (oriented such that the normal vectors point to the right side of the contour as the contour is traversed from start to end point; the angles are given with respect to the row axis of the image).
'response': Edge amplitude (gradient magnitude).
edges_color_sub_pix links the edge points into edges by
using an algorithm similar to a hysteresis threshold operation,
which is also used in edges_sub_pix and lines_gauss.
Points with an amplitude larger than High are immediately
accepted as belonging to an edge, while points with an amplitude
smaller than Low are rejected. All other points are
accepted as edges if they are connected to accepted edge points (see
also lines_gauss and hysteresis_threshold).
Because edge extractors are often unable to extract certain
junctions, a mode that tries to extract these missing junctions by
different means can be selected by appending '_junctions'
to the values of Filter that are described above. This
mode is analogous to the mode for completing junctions that is
available in edges_sub_pix and lines_gauss.
The edge operator 'sobel_fast' has the same semantics as all the other edge operators. Internally, however, it is based on significantly simplified variants of the individual processing steps (hysteresis thresholding, edge point linking, and extraction of the subpixel edge positions). Therefore, 'sobel_fast' in some cases may return slightly less accurate edge positions and may select different edge parts.
Note that filter operators may return unexpected results if an image with a reduced domain is used as input. Please refer to the chapter Filters.
Image (input_object) (multichannel-)image → object (byte / uint2)
Input image.
Edges (output_object) xld_cont-array → object
Extracted edges.
Filter (input_control) string → (string)
Edge operator to be applied.
Default: 'canny'
List of values: 'canny', 'canny_junctions', 'deriche1', 'deriche1_junctions', 'deriche2', 'deriche2_junctions', 'shen', 'shen_junctions', 'sobel_fast'
Alpha (input_control) real → (real)
Filter parameter: small values result in strong smoothing, and thus less detail (opposite for 'canny').
Default: 1.0
Suggested values: 0.1, 0.2, 0.3, 0.4, 0.5, 0.7, 0.9, 1.0, 1.1, 1.2, 1.5, 2.0, 2.5, 3.0
Minimum increment: 0.01
Recommended increment: 0.1
Restriction:
Alpha > 0.0
Low (input_control) number → (real / integer)
Lower threshold for the hysteresis threshold operation.
Default: 20
Suggested values: 5, 10, 15, 20, 25, 30, 40
Value range:
0
≤
Low
Minimum increment: 1
Recommended increment: 5
Restriction:
Low > 0
High (input_control) number → (real / integer)
Upper threshold for the hysteresis threshold operation.
Default: 40
Suggested values: 10, 15, 20, 25, 30, 40, 50, 60, 70
Value range:
0
≤
High
Minimum increment: 1
Recommended increment: 5
Restriction:
High > 0 && High >= Low
The amount of temporary memory required is dependent on the height H
of the domain of Image.
edges_color_sub_pix returns 2 (
H_MSG_TRUE)
if all parameters are
correct and no error occurs during execution. If the input is empty
the behavior can be set via
set_system('no_object_result',<Result>). If necessary, an
exception is raised.
edges_image,
edges_sub_pix,
info_edges,
hysteresis_threshold,
lines_gauss,
lines_facet
C. Steger: “Subpixel-Precise Extraction of Lines and Edges”;
International Archives of Photogrammetry and Remote Sensing,
vol. XXXIII, part B3; pp. 141-156; 2000.
C. Steger: “Unbiased Extraction of Curvilinear Structures from 2D
and 3D Images”; Herbert Utz Verlag, München; 1998.
S. Di Zenzo: “A Note on the Gradient of a Multi-Image”; Computer
Vision, Graphics, and Image Processing, vol. 33; pp. 116-125;
1986.
Aldo Cumani: “Edge Detection in Multispectral Images”; Computer
Vision, Graphics, and Image Processing: Graphical Models and Image
Processing, vol. 53, no. 1; pp. 40-51; 1991.
J.Canny: “Finding Edges and Lines in Images”; Report, AI-TR-720;
M.I.T. Artificial Intelligence Lab., Cambridge; 1983.
J.Canny: “A Computational Approach to Edge Detection”; IEEE
Transactions on Pattern Analysis and Machine Intelligence; PAMI-8,
vol. 6; pp. 679-698; 1986.
R.Deriche: “Using Canny's Criteria to Derive a Recursively
Implemented Optimal Edge Detector”; International Journal of
Computer Vision; vol. 1, no. 2; pp. 167-187; 1987.
R.Deriche: “Fast Algorithms for Low-Level Vision”; IEEE
Transactions on Pattern Analysis and Machine Intelligence; PAMI-12,
no. 1; pp. 78-87; 1990.
J. Shen, S. Castan: “An Optimal Linear Operator for Step Edge
Detection”; Computer Vision, Graphics, and Image Processing:
Graphical Models and Image Processing, vol. 54, no. 2;
pp. 112-133; 1992.
2D Metrology