get_metrology_object_resultT_get_metrology_object_resultGetMetrologyObjectResultGetMetrologyObjectResultget_metrology_object_result (Operator)
Name
get_metrology_object_resultT_get_metrology_object_resultGetMetrologyObjectResultGetMetrologyObjectResultget_metrology_object_result — Get the results of the measurement of a metrology model.
Signature
void GetMetrologyObjectResult(const HTuple& MetrologyHandle, const HTuple& Index, const HTuple& Instance, const HTuple& GenParamName, const HTuple& GenParamValue, HTuple* Parameter)
HTuple HMetrologyModel::GetMetrologyObjectResult(const HTuple& Index, const HTuple& Instance, const HTuple& GenParamName, const HTuple& GenParamValue) const
HTuple HMetrologyModel::GetMetrologyObjectResult(Hlong Index, const HString& Instance, const HTuple& GenParamName, const HTuple& GenParamValue) const
HTuple HMetrologyModel::GetMetrologyObjectResult(Hlong Index, const char* Instance, const HTuple& GenParamName, const HTuple& GenParamValue) const
HTuple HMetrologyModel::GetMetrologyObjectResult(Hlong Index, const wchar_t* Instance, const HTuple& GenParamName, const HTuple& GenParamValue) const
(
Windows only)
static void HOperatorSet.GetMetrologyObjectResult(HTuple metrologyHandle, HTuple index, HTuple instance, HTuple genParamName, HTuple genParamValue, out HTuple parameter)
HTuple HMetrologyModel.GetMetrologyObjectResult(HTuple index, HTuple instance, HTuple genParamName, HTuple genParamValue)
HTuple HMetrologyModel.GetMetrologyObjectResult(int index, string instance, HTuple genParamName, HTuple genParamValue)
def get_metrology_object_result(metrology_handle: HHandle, index: MaybeSequence[Union[int, str]], instance: MaybeSequence[Union[int, str]], gen_param_name: Sequence[str], gen_param_value: Sequence[Union[str, float]]) -> Sequence[Union[float, int, str]]
def get_metrology_object_result_s(metrology_handle: HHandle, index: MaybeSequence[Union[int, str]], instance: MaybeSequence[Union[int, str]], gen_param_name: Sequence[str], gen_param_value: Sequence[Union[str, float]]) -> Union[float, int, str]
Description
get_metrology_object_resultget_metrology_object_resultGetMetrologyObjectResultGetMetrologyObjectResultget_metrology_object_result allows to access the results of a
measurement obtained by apply_metrology_modelapply_metrology_modelApplyMetrologyModelApplyMetrologyModelapply_metrology_model for the metrology
objects of the metrology model MetrologyHandleMetrologyHandleMetrologyHandlemetrologyHandlemetrology_handle.
For an explanation of the concept of 2D metrology see the
introduction of chapter 2D Metrology.
The parameter IndexIndexIndexindexindex specifies for which metrology objects the
results are queried. For IndexIndexIndexindexindex set to 'all'"all""all""all""all", the results
of all metrology objects are returned. With the parameter InstanceInstanceInstanceinstanceinstance
it can be specified, which instances of the results are returned in
ParameterParameterParameterparameterparameter. The results for all instances are
returned by setting InstanceInstanceInstanceinstanceinstance to 'all'"all""all""all""all". Different generic
parameters can be used to control the returned values in ParameterParameterParameterparameterparameter.
The generic parameter names are passed in GenParamNameGenParamNameGenParamNamegenParamNamegen_param_name. The
corresponding values are passed in GenParamValueGenParamValueGenParamValuegenParamValuegen_param_value. The following
parameters and values are possible:
- 'result_type'"result_type""result_type""result_type""result_type":
-
If GenParamNameGenParamNameGenParamNamegenParamNamegen_param_name is set to 'result_type'"result_type""result_type""result_type""result_type", then
GenParamValueGenParamValueGenParamValuegenParamValuegen_param_value allows to control
how and what results are returned for a metrology object.
All measured parameters of the queried metrology
object can be queried at once, specific parameters can be queried
individually or the score for the metrology object can be queried.
- 'Obtaining all parameters':
-
If GenParamValueGenParamValueGenParamValuegenParamValuegen_param_value is set to 'all_param'"all_param""all_param""all_param""all_param", then all
measured parameters of a metrology object are returned. If
camera parameters and a pose
have been set (see set_metrology_model_paramset_metrology_model_paramSetMetrologyModelParamSetMetrologyModelParamset_metrology_model_param), the
results are returned in metric coordinates, otherwise in pixels.
For a circle, the return
values are the coordinates of the center and the radius
of the circle. The order is ['row'"row""row""row""row", 'column'"column""column""column""column",
'radius'"radius""radius""radius""radius"] or ['x'"x""x""x""x", 'y'"y""y""y""y",
'radius'"radius""radius""radius""radius"] respectively.
For an ellipse, the return
values are the coordinates of the center, the orientation of the major axis
'phi'"phi""phi""phi""phi", the length of the larger half axis
'radius1'"radius1""radius1""radius1""radius1", and the length of the smaller half axis
'radius2'"radius2""radius2""radius2""radius2" of the ellipse. The order is ['row'"row""row""row""row",
'column'"column""column""column""column", 'phi'"phi""phi""phi""phi", 'radius1'"radius1""radius1""radius1""radius1",
'radius2'"radius2""radius2""radius2""radius2"] or ['x'"x""x""x""x",
'y'"y""y""y""y", 'phi'"phi""phi""phi""phi", 'radius1'"radius1""radius1""radius1""radius1",
'radius2'"radius2""radius2""radius2""radius2"] respectively.
For a line, the start and end
point of the line is returned.
The order is ['row_begin'"row_begin""row_begin""row_begin""row_begin", 'column_begin'"column_begin""column_begin""column_begin""column_begin",
'row_end'"row_end""row_end""row_end""row_end", 'column_end'"column_end""column_end""column_end""column_end"] or
['x_begin'"x_begin""x_begin""x_begin""x_begin", 'y_begin'"y_begin""y_begin""y_begin""y_begin", 'x_end'"x_end""x_end""x_end""x_end", 'y_end'"y_end""y_end""y_end""y_end"]
For a rectangle, the return
values are the coordinates of the center, the orientation of the main axis
'phi'"phi""phi""phi""phi", the length of the larger half edge
'length1'"length1""length1""length1""length1", and the length of the smaller half edge
'length2'"length2""length2""length2""length2" of the rectangle. The order is ['row'"row""row""row""row",
'column'"column""column""column""column", 'phi'"phi""phi""phi""phi", 'length1'"length1""length1""length1""length1",
'length2'"length2""length2""length2""length2"] or ['x'"x""x""x""x",
'y'"y""y""y""y", 'phi'"phi""phi""phi""phi", 'length1'"length1""length1""length1""length1",
'length2'"length2""length2""length2""length2"] respectively.
- 'Obtaining specific parameters':
-
Measured object parameters can also be queried individually by providing
the desired parameter name in GenParamNameGenParamNameGenParamNamegenParamNamegen_param_name.
When no camera parameters and no measurement plane are set,
the following parameters can be queried individually, depending on
whether they are available for the respective object.
Note that for lines, additionally
the 3 parameters of the hessian normal form can be queried,
i.e., the unit normal vector 'nrow'"nrow""nrow""nrow""nrow", 'ncolumn'"ncolumn""ncolumn""ncolumn""ncolumn"
and the orthogonal distance
'distance'"distance""distance""distance""distance" of the line from the origin of the coordinate system.
The sign of the distance determines the side of the line on which
the origin is located.
List of values:
'row'"row""row""row""row", 'column'"column""column""column""column",
'radius'"radius""radius""radius""radius", 'phi'"phi""phi""phi""phi" , 'radius1'"radius1""radius1""radius1""radius1", 'radius2'"radius2""radius2""radius2""radius2",
'length1'"length1""length1""length1""length1", 'length2'"length2""length2""length2""length2", 'row_begin'"row_begin""row_begin""row_begin""row_begin",
'column_begin'"column_begin""column_begin""column_begin""column_begin", 'row_end'"row_end""row_end""row_end""row_end", 'column_end'"column_end""column_end""column_end""column_end",
'nrow'"nrow""nrow""nrow""nrow", 'ncolumn'"ncolumn""ncolumn""ncolumn""ncolumn", 'distance'"distance""distance""distance""distance"
If camera parameters and a measurement plane
was set, the parameters are returned in metric coordinates,
the following parameters can be queried individually, depending on
whether they are available for the respective object.
Note that for lines, additionally the 3 parameters of the hessian normal
form can be queried, i.e., the unit normal vector
'nx'"nx""nx""nx""nx", 'ny'"ny""ny""ny""ny" and the orthogonal distance
'distance'"distance""distance""distance""distance" of the line from the origin of the coordinate system.
The sign of the distance determines the side of the line on which
the origin is located.
List of values:
'x'"x""x""x""x", 'y'"y""y""y""y",
'radius'"radius""radius""radius""radius", 'phi'"phi""phi""phi""phi" , 'radius1'"radius1""radius1""radius1""radius1", 'radius2'"radius2""radius2""radius2""radius2",
'length1'"length1""length1""length1""length1", 'length2'"length2""length2""length2""length2", 'radius1'"radius1""radius1""radius1""radius1",
'radius2'"radius2""radius2""radius2""radius2", 'length1'"length1""length1""length1""length1", 'length2'"length2""length2""length2""length2",
'x_begin'"x_begin""x_begin""x_begin""x_begin", 'y_begin'"y_begin""y_begin""y_begin""y_begin", 'x_end'"x_end""x_end""x_end""x_end",
'y_end'"y_end""y_end""y_end""y_end", 'nx'"nx""nx""nx""nx", 'ny'"ny""ny""ny""ny", 'distance'"distance""distance""distance""distance"
- 'Obtaining the score':
-
If GenParamNameGenParamNameGenParamNamegenParamNamegen_param_name is set to the 'score'"score""score""score""score", the fitting
scores are returned. The score represents
the number of measurements that are used for the calculation of
the results divided by the maximum number of measure regions.
- 'used_edges'"used_edges""used_edges""used_edges""used_edges":
-
To query the edge points, that were actually
used for a fitted metrology object, you can choose between following values
for GenParamValueGenParamValueGenParamValuegenParamValuegen_param_value:
- 'row'"row""row""row""row":
Return the row coordinate of the edges that
were used to fit the metrology object.
- 'column'"column""column""column""column":
Return the column coordinate of the edges that were used to fit the
metrology object.
- 'amplitude'"amplitude""amplitude""amplitude""amplitude":
Return the edge amplitude of the edges that
were used to fit the metrology object.
List of values:
'row'"row""row""row""row", 'column'"column""column""column""column",
'amplitude'"amplitude""amplitude""amplitude""amplitude"
- 'angle_direction'"angle_direction""angle_direction""angle_direction""angle_direction":
-
The parameter determines the rotation
direction for angles that result from the fitting. Setting the
parameter 'angle_direction'"angle_direction""angle_direction""angle_direction""angle_direction" to 'positive'"positive""positive""positive""positive" the angle is
specified between the main axis of the object and
the horizontal axis of the coordinate system in the mathematically
positive direction (counterclockwise). Setting the parameter
'angle_direction'"angle_direction""angle_direction""angle_direction""angle_direction" to 'negative'"negative""negative""negative""negative" the angle is specified
between the main axis of the object and the horizontal axis
of the coordinate system in the mathematically negative direction
(clockwise). The results of the angles are returned in radians.
List of values:
'positive'"positive""positive""positive""positive", 'negative'"negative""negative""negative""negative"
Default:
'positive'"positive""positive""positive""positive"
It is possible to query the results of several metrology objects (see the
parameter IndexIndexIndexindexindex) and several instances (see the parameter
InstanceInstanceInstanceinstanceinstance) of the metrology objects simultaneously. The results are
returned in the following order in ParameterParameterParameterparameterparameter: 1st instance
of 1st metrology object, 2nd instance of 1st metrology object, etc., 1st
instance of 2nd metrology object, 2nd instance of 2nd metrology object,
etc.
Execution Information
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
Parameters
MetrologyHandleMetrologyHandleMetrologyHandlemetrologyHandlemetrology_handle (input_control) metrology_model → HMetrologyModel, HTupleHHandleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)
Handle of the metrology model.
IndexIndexIndexindexindex (input_control) integer(-array) → HTupleMaybeSequence[Union[int, str]]HTupleHtuple (integer / string) (int / long / string) (Hlong / HString) (Hlong / char*)
Index of the metrology object.
Default:
0
Suggested values:
'all'"all""all""all""all", 0, 1, 2
InstanceInstanceInstanceinstanceinstance (input_control) integer(-array) → HTupleMaybeSequence[Union[int, str]]HTupleHtuple (string / integer) (string / int / long) (HString / Hlong) (char* / Hlong)
Instance of the metrology object.
Default:
'all'
"all"
"all"
"all"
"all"
Suggested values:
'all'"all""all""all""all", 0, 1, 2
GenParamNameGenParamNameGenParamNamegenParamNamegen_param_name (input_control) attribute.name-array → HTupleSequence[str]HTupleHtuple (string) (string) (HString) (char*)
Name of the generic parameter.
Default:
'result_type'
"result_type"
"result_type"
"result_type"
"result_type"
List of values:
'angle_direction'"angle_direction""angle_direction""angle_direction""angle_direction", 'result_type'"result_type""result_type""result_type""result_type", 'used_edges'"used_edges""used_edges""used_edges""used_edges"
GenParamValueGenParamValueGenParamValuegenParamValuegen_param_value (input_control) attribute.value-array → HTupleSequence[Union[str, float]]HTupleHtuple (string / real) (string / double) (HString / double) (char* / double)
Value of the generic parameter.
Default:
'all_param'
"all_param"
"all_param"
"all_param"
"all_param"
Suggested values:
'all_param'"all_param""all_param""all_param""all_param", 'score'"score""score""score""score", 'true'"true""true""true""true", 'false'"false""false""false""false", 'row'"row""row""row""row", 'column'"column""column""column""column", 'amplitude'"amplitude""amplitude""amplitude""amplitude", 'radius'"radius""radius""radius""radius", 'phi'"phi""phi""phi""phi", 'radius1'"radius1""radius1""radius1""radius1", 'radius2'"radius2""radius2""radius2""radius2", 'length1'"length1""length1""length1""length1", 'length2'"length2""length2""length2""length2", 'row_begin'"row_begin""row_begin""row_begin""row_begin", 'column_begin'"column_begin""column_begin""column_begin""column_begin", 'row_end'"row_end""row_end""row_end""row_end", 'column_end'"column_end""column_end""column_end""column_end", 'nrow'"nrow""nrow""nrow""nrow", 'ncolumn'"ncolumn""ncolumn""ncolumn""ncolumn", 'distance'"distance""distance""distance""distance", 'x'"x""x""x""x", 'y'"y""y""y""y", 'x_begin'"x_begin""x_begin""x_begin""x_begin", 'y_begin'"y_begin""y_begin""y_begin""y_begin", 'x_end'"x_end""x_end""x_end""x_end", 'y_end'"y_end""y_end""y_end""y_end", 'nx'"nx""nx""nx""nx", 'ny'"ny""ny""ny""ny", 'positive'"positive""positive""positive""positive", 'negative'"negative""negative""negative""negative"
ParameterParameterParameterparameterparameter (output_control) real(-array) → HTupleSequence[Union[float, int, str]]HTupleHtuple (real / integer / string) (double / int / long / string) (double / Hlong / HString) (double / Hlong / char*)
Result values.
Result
If the parameters are valid, the operator
get_metrology_object_resultget_metrology_object_resultGetMetrologyObjectResultGetMetrologyObjectResultget_metrology_object_result returns the value 2 (
H_MSG_TRUE)
. If
necessary, an exception is raised.
Possible Predecessors
apply_metrology_modelapply_metrology_modelApplyMetrologyModelApplyMetrologyModelapply_metrology_model
Possible Successors
clear_metrology_modelclear_metrology_modelClearMetrologyModelClearMetrologyModelclear_metrology_model
See also
get_metrology_object_result_contourget_metrology_object_result_contourGetMetrologyObjectResultContourGetMetrologyObjectResultContourget_metrology_object_result_contour,
get_metrology_object_measuresget_metrology_object_measuresGetMetrologyObjectMeasuresGetMetrologyObjectMeasuresget_metrology_object_measures
Module
2D Metrology