set_bead_inspection_paramT_set_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamset_bead_inspection_param (Operator)

Name

set_bead_inspection_paramT_set_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamset_bead_inspection_param — Set parameters of the bead inspection model.

Signature

set_bead_inspection_param( : : BeadInspectionModel, GenParamName, GenParamValue : )

Description

The operator set_bead_inspection_paramset_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamset_bead_inspection_param is used to set parameters of a bead inspection model in order to adapt it to a particular inspection task. All parameters except for the model's contour can be set with this operator. A new bead inspection model should be used when a new contour is introduced. The current values of all parameters can be queried with the operator get_bead_inspection_paramget_bead_inspection_paramGetBeadInspectionParamGetBeadInspectionParamget_bead_inspection_param.

Parameters that can be set

The following parameters are essential and inspection model specific. It is vital for the inspection's success to identify accurate values for those parameters:

'target_thickness'"target_thickness""target_thickness""target_thickness""target_thickness":: sets the TargetThicknessTargetThicknessTargetThicknesstargetThicknesstarget_thickness.
'thickness_tolerance'"thickness_tolerance""thickness_tolerance""thickness_tolerance""thickness_tolerance":: sets the ThicknessToleranceThicknessToleranceThicknessTolerancethicknessTolerancethickness_tolerance.
'position_tolerance'"position_tolerance""position_tolerance""position_tolerance""position_tolerance":: sets the PositionTolerancePositionTolerancePositionTolerancepositionToleranceposition_tolerance.
'polarity'"polarity""polarity""polarity""polarity":: sets the bead's PolarityPolarityPolaritypolaritypolarity.
'sigma'"sigma""sigma""sigma""sigma"
'threshold'"threshold""threshold""threshold""threshold"

For more details, refer to the parameters' description in create_bead_inspection_modelcreate_bead_inspection_modelCreateBeadInspectionModelCreateBeadInspectionModelcreate_bead_inspection_model.

Execution Information

Multithreading type: reentrant (runs in parallel with non-exclusive operators).
Multithreading scope: global (may be called from any thread).
Processed without parallelization.

This operator modifies the state of the following input parameter:

BeadInspectionModelBeadInspectionModelBeadInspectionModelbeadInspectionModelbead_inspection_model

During execution of this operator, access to the value of this parameter must be synchronized if it is used across multiple threads.

Parameters

BeadInspectionModelBeadInspectionModelBeadInspectionModelbeadInspectionModelbead_inspection_model (input_control, state is modified) bead_inspection_model → (handle)

Handle of the bead inspection model.

GenParamNameGenParamNameGenParamNamegenParamNamegen_param_name (input_control) attribute.name(-array) → (string)

Name of the model parameter that shall be adjusted for the specified bead inspection model.

Default: 'target_thickness' "target_thickness" "target_thickness" "target_thickness" "target_thickness"

List of values: 'polarity'"polarity""polarity""polarity""polarity", 'position_tolerance'"position_tolerance""position_tolerance""position_tolerance""position_tolerance", 'sigma'"sigma""sigma""sigma""sigma", 'target_thickness'"target_thickness""target_thickness""target_thickness""target_thickness", 'thickness_tolerance'"thickness_tolerance""thickness_tolerance""thickness_tolerance""thickness_tolerance", 'threshold'"threshold""threshold""threshold""threshold"

GenParamValueGenParamValueGenParamValuegenParamValuegen_param_value (input_control) attribute.value(-array) → (string / integer / real)

Value of the model parameter that shall be adjusted for the specified bead inspection model.

Default: 40

Suggested values: 40, 10, 15, 0.6, 1.0, 4.0, 5.0, 'light'"light""light""light""light", 'dark'"dark""dark""dark""dark"

Result

The operator set_bead_inspection_paramset_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamset_bead_inspection_param returns the value 2 ( H_MSG_TRUE) if the given parameters are valid and within acceptable range. Otherwise, an exception will be raised.