石鑫华视觉论坛

 找回密码
 注册会员
查看: 3324|回复: 0

[NI驱动程序] NI Vision Acquisition Software 2015.05 LabVIEW2014SP1 Win32/64Eng 视觉采集软件VAS2015May下载 USB3 Vision Patch Update

[复制链接]
  • TA的每日心情

    12 小时前
  • 签到天数: 3384 天

    连续签到: 6 天

    [LV.Master]2000FPS

    发表于 2020-2-16 23:50:35 | 显示全部楼层 |阅读模式 来自:广东省东莞市 联通

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    NI Vision Acquisition Software 2015.05 LabVIEW2014SP1 Win32/64Eng 视觉采集软件VAS2015May下载 USB3 Vision Patch Update


    文件大小: 7041396 字节 (6.72 MB)
    修改日期: 2019-06-25 03:16
    MD5: 97f4527838a1176d181ed6f2bd250d92(官方正确)
    SHA1: 6ad46638641ea993801f10130cae4427cc96a5bb
    SHA256: 62549ed187029f6a413781c3fac066ae7b438a5a922b2302d27d573a06df187e
    CRC32: c6204c1f
    百度网盘下载:
    链接: 请注册视觉论坛会员登录后购买附件下载查看
    提取码: 请购买附件下载查看

    NI官方下载:
    请购买附件下载查看
    VAS2015.05 USB3 VISION Pathch Update.txt (226 Bytes, 下载次数: 47, 售价: 1 元)

    USB3 Vision Patch for CompactRIO and CompactDAQ Targets
    May 2015
    A patch is available for NI-IMAQdx 14.5 to enable Basler USB3 Vision cameras to acquire images on the USB ports of the following real-time targets:
    • cRIO-9035
    • cRIO-9036
    • cRIO-9039
    • cRIO-9063
    • cRIO-9064
    • cRIO-9065
    • cDAQ-9133
    • cDAQ-9135

    You must have NI Vision Acquisition Software February 2015 installed before installing this update. After you have installed this patch, redeploy USB3 Vision Support to your CompactRIO and CompactDAQ targets. To ensure you are running the patched version, it is recommended that you remove USB3 Vision Support, reboot the target, and then reinstall USB3 Vision Support from the host.
    For more information about supported devices, visit ni.com/info and enter the Info Code USB3RIODAQ.

    Legal Information
    Copyright
    © 2015 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(24.09)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解2020-2024》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-11-22 20:44

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表