LabVIEW 2013 Datalogging and Supervisory Control Module Win32Eng LV2013数据记录和监控模块DSC2013

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2013 Datalogging and Supervisory Control Module Win32Eng LV2013数据记录和监控模块DSC2013

LabVIEW数据记录和监控(DSC)模块适用于开发HMI/SCADA或高通道数数据记录应用程序。
LabVIEW数据记录和监控(DSC)模块是LabVIEW编程环境的一个附加软件。您可以使用此模块以及数十到数万个标签，快速开发分布式监测和控制系统。该模块包含将数据记录到网络历史数据库、跟踪实时和历史趋势、管理警报和事件、将LabVIEW实时终端和OPC设备联网到一个完整系统，以及为用户界面添加安全性等任务所需的工具。

Full
文件大小: 841392928 字节 (802.41 MB)
修改日期: 2020-02-23 12:38
MD5: 10b17cb9e31d170ff525904c84fbec2c
SHA1: 470cb68a1f926c909a5b6e1d924e254ec47f8793
SHA256: a17ab07e10dfe5968d594bd0edd8f98fd99c4c4a02bfdcf4c230a93300749a2c
SHA512: 2ce5fc28c4dcc10c37357a9d20611557a33f338a82b749d7fb5367b786511bcefb819d9b7ac7c4e45e19449b3021b12165b0c79e7af33ccca927dddc3c2312ad
百度网盘下载和NI官方下载地址:
请购买附件下载查看
DSC2013.txt (781 Bytes, 下载次数: 14, 售价: 10 元)

2020-2-23 14:36 上传

点击文件名下载附件
DSC2013

RTS
文件大小: 749159200 字节 (714.45 MB)
修改日期: 2023-05-11 16:52
MD5: cd03b1581c5b398332e9472e3472fc4a
SHA1: e2aa999cdd364282326fc274cbb38e02254d2aeb
SHA256: 7aa9c2b0df0138370070958c1b73dce9c0f21e87b4c7ebe5366af24f7f68ec3f
CRC32: 28914292
百度网盘下载和NI官方下载地址:
DSC_RTS2013.txt (399 Bytes, 下载次数: 0, 售价: 8 元)

2023-5-11 17:57 上传

点击文件名下载附件

LabVIEW 2013 Datalogging and Supervisory Control Module Readme

Version 13.0.0

June 2013

This file contains important information about the LabVIEW 2013 Datalogging and Supervisory Control (DSC) Module, including installation instructions, a partial list of bugs fixed for the LabVIEW 2013 DSC Module, and known issues. Refer to the LabVIEW Datalogging and Supervisory Control Module Release and Upgrade Notes, which are available in your DSC Module software kit, for upgrade and compatibility issues of the DSC Module and a complete list of the new features and changes from the DSC Module 2012.

Overview

System Requirements

Installation Instructions

Known Issues

Bug Fixes

Accessing the Help

Finding Examples

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

---

Overview

The LabVIEW Datalogging and Supervisory Control (DSC) Module extends the LabVIEW graphical development environment with additional functionality for the rapid development of distributed measurement, control, and high-channel-count monitoring applications. The DSC Module enhances the LabVIEW shared variable, supports logging data to the Citadel and relational databases, enhances the Historical Data Viewer and the NI Distributed System Manager, provides support for Touch Panel devices running Windows Embedded Standard, and provides tools for graphing historical or real-time trends, enhancing the security of front panels, and writing custom I/O servers.

System Requirements

In addition to the system requirements for the LabVIEW Development System, the DSC Module has the following requirements:

• LabVIEW 2013 Base, Full, or Professional Development System (32-bit)
• At least 2.5 GB of disk space
• 512 MB of RAM. National Instruments recommends 1 GB of RAM
• Internet Explorer 6 Service Pack 1 or later
  

Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2013.

Installation Instructions

You can install all of your LabVIEW products—including the DSC Module—using the LabVIEW 2013 Platform DVDs. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.

To request additional LabVIEW Platform DVDs, refer to the National Instruments website.

Note  If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

LabVIEW Datalogging and Supervisory Control Module Updates and Notifications

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.

Known Issues

You can access the software and documentation known issues list online. National Instruments website for an up-to-date list of known issues in the DSC Module

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in the 2013 DSC Module. This is not an exhaustive list of issues fixed in the current version of the current version of the DSC Module. If you have a CAR ID, you can search this list to validate the issue has been fixed.

ID	Fixed Issue
93751	Alarm properties are set to default values when it is disabled and enabled again via properties nodes
252427	Cannot set a shared variable as U32 Bit Field type from the shared variable dialog in a LabVIEW project
349645	The Shared Variable Engine and LabVIEW AckType enum values are defined in a different order
356183	The NI DSC OPC UA API and QuickClient are not compatible with the COPA-DATA ZenOPCsvr
364404	LabVIEW returns "Library not found or failed to load" error messages after you close and reopen a VI
370238	LabVIEW crashes if the Alarm Properties window is open while an alarm is automatically acknowledged
397993	The Read Traces VI hangs when reading a remote trace as an executable

Accessing the Help

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the DSC Module.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the DSC Module are located in the labview\examples\lvdsc directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

NI LabVIEW Datalogging and Supervisory Control Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments LabVIEW Datalogging and Supervisory Control Module will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of LabVIEW Datalogging and Supervisory Control Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

---

Important Information

Copyright

© 2000–2013 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.