LabVIEW 2020 FPGA IP Export Utility Win64ENG LabVIEW2020 FPGA IP导出工具包IPEU2020-64bit

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW 2020 FPGA IP Export Utility Win64ENG LabVIEW2020 FPGA IP导出工具包IPEU2020-64bit

LabVIEW FPGA IP Export Utility可用于导出LabVIEW FPGA算法，以便在第三方硬件上进行部署。
LabVIEW FPGA IP Export Utility是一个软件附件，可帮助您使用LabVIEW FPGA在NI FPGA硬件上对实时算法进行快速原型设计。然后，您可以将经过验证的设计导出为VHDL源代码或网表，以在第三方硬件上使用。使用LabVIEW FPGA IP Export Utility需要先安装LabVIEW FPGA模块。

该工具包为2020版首发的，之前没有该工具包，以前应该是使用FPGA IP Builder生成器来完成类似的任务（因为我方不使用该工具包，只是猜测，未验证）。2020版可选Windows32位、64位版本，仅英文版。

校验和：
文件大小: 321845248 字节 (306.94 MB)
修改日期: 2020-05-12 01:22
MD5: 8bc136619e1f79674ce8799c3cb92224（官方正确）
SHA1: ad779b39bd22c34171e5b807607631b3279e21ff
SHA256: f4488eb0d9a15fcef6be5421b41ef7d9086b90626b4367e4cbff55f79d0ae0be
CRC32: 29a34729

百度网盘和NI官方下载地址：
请注册登录视觉论坛会员，购买附件查看
IPEU2020-64.txt (337 Bytes, 下载次数: 1, 售价: 10 元)

2020-8-3 18:19 上传

点击文件名下载附件
IPEU2020-64

LabVIEW 2020 FPGA IP Export Utility Readme

March 2020

This file contains important information about the LabVIEW FPGA IP Export Utility, including system requirements and installation instructions.

---

Overview

System Requirements

Supported Operating Systems

Installation Instructions

Activation Notice

Product Security and Critical Updates

Accessing the Help

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

The LabVIEW FPGA IP Export Utility Drops Support for Windows 7 in 2021

Legal Information

---

Overview

The LabVIEW FPGA IP Export Utility allows you to export your FPGA algorithm developed in LabVIEW FPGA as FPGA IP (Intellectual Property). You can then integrate the IP in your Vivado project and use the IP on any Xilinx Vivado FPGA device of the same family. The LabVIEW FPGA IP Export Utility provides the following editions:

• LabVIEW FPGA Netlist Export Utility—Exports an FPGA algorithm as an encrypted netlist.
• LabVIEW FPGA VHDL Export Utility—Exports an FPGA algorithm as an encrypted netlist or plaintext VHDL.
  

System Requirements

The LabVIEW 2020 FPGA IP Export Utility has the following requirements:

• LabVIEW 2020 Full or Professional Development Systems (32-bit or 64-bit)
• LabVIEW 2020 FPGA Module (32-bit or 64-bit)
• LabVIEW 2020 FPGA Compilation Tool for Vivado 2019.1
  

Refer to the LabVIEW Readme, LabVIEW FPGA Module Readme, and Xilinx Compilation Tools Readme for additional system requirements and supported operating systems.

Supported Operating Systems

The LabVIEW 2020 FPGA IP Export Utility supports the following operating systems:

• Windows 10 (version 1909) (64-bit)
• Windows 7 SP1 (64-bit)1
  

1 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

Note  Refer to The LabVIEW FPGA IP Export Utility Drops Support for Windows 7 in 2021 for information about future OS support.

Installation Instructions

NI installs the LabVIEW FPGA IP Export Utility using NI Package Manager. If you do not already have NI software installed, the LabVIEW FPGA IP Export Utility installs NI Package Manager to handle the installation of your NI software. Visit ni.com/r/NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Notes

• If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
• If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
  

Activation Notice

The LabVIEW FPGA IP Export Utility provides two purchase options: LabVIEW FPGA Netlist Export Utility and LabVIEW FPGA VHDL Export Utility. Depending on your purchase option, activate the LabVIEW FPGA IP Export Utility in the following ways:

• LabVIEW FPGA Netlist Export Utility—Allows you to export your FPGA algorithm developed in LabVIEW FPGA to FPGA IP as an encrypted netlist. Activate or evaluate the LabVIEW FPGA IP Export Utility using NI License Manager.
• LabVIEW FPGA VHDL Export Utility—Allows you to export your FPGA algorithm developed in LabVIEW FPGA to FPGA IP as an encrypted netlist or plaintext VHDL. Activate the LabVIEW FPGA IP Export Utility in the following ways:
  
  • Activate the LabVIEW FPGA IP Export Utility using NI License Manager.
    Upon activation, you can export your FPGA algorithm developed in LabVIEW FPGA to FPGA IP as an encrypted netlist.
  • To export your FPGA algorithm as plaintext VHDL, continue with the following steps:
    
    • Email labview.fpga.VHDL.access@ni.com with the following information:
      
      • LabVIEW version
      • Serial number for the LabVIEW FPGA VHDL Export Utility license
      • Volume serial number—Accessible by running the vol C: command from the command line window.
        
      If your request is approved, you will receive a node-locked catalog (.cat) file that you can use on the designated computer with the specified LabVIEW version.
    • Install the catalog file on the designated computer by completing the following steps:
      
      • Close LabVIEW.
      • Create a folder named IPExport in the labview\FPGA directory, where labview is the installation directory of the specified LabVIEW version.
      • Copy the catalog file to the new folder.
        
      
      
    You can then export your FPGA algorithm as plaintext VHDL.
    Note  You can change the filename of the catalog file. Do not include spaces, special or non-ASCII characters in the catalog filename.
    
  
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Accessing the Help

Refer to the Getting Started with the LabVIEW FPGA IP Export Utility for information about using the LabVIEW FPGA IP Export Utility. Access this manual by navigating to the labview\manuals\LabVIEW FPGA IP Export Utility directory and opening FPGA_IP_Export_Getting_Started.pdf

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

The LabVIEW FPGA IP Export Utility Drops Support for Windows 7 in 2021

The LabVIEW FPGA IP Export Utility will drop support for Windows 7 starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.

---

Legal Information

Copyright

© 2020 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

378241A-01