NI FlexLogger 2019R2.1(1.7.1) Win64Eng 美国国家仪器FlexLogger应用软件2019R2.1版即ni-flexlogger_1.7.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI FlexLogger 2019R2.1(1.7.1) Win64Eng 美国国家仪器FlexLogger应用软件2019R2.1版即ni-flexlogger_1.7.1

FlexLogger是可快速配置传感器和记录混合信号数据的应用软件，用于验证机电系统，而且完全无需编程。
FlexLogger应用软件可帮助您使用NI DAQ硬件构建灵活、可扩展的数据记录系统，而且无需任何编程。您可以使用针对特定传感器的配置工作流程来快速设置、显示和记录来自模拟传感器、数字信号和车载通信总线等测量的同步数据，您还可以通过生成电压、电流或数字信号来驱动执行器或控制设定点，这些信号可以通过事件触发器自动响应不断变化的条件。FlexLogger可自动保存记录测试配置的元数据，以便您可以快速跟踪测试结果并比较多个测试的结果。 您还可以通过集成的数据查看器交互式地查看测试结果，以便直观地检查数据并得出结论。

百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服 提取码: 请注册登录视觉论坛会员，购买附件查看
（因为单个文件大于4GB，超出百度网盘文件上限，分割成两个压缩文档分包）

NI官方下载地址（可能无效或无法下载完成）：
请注册登录视觉论坛会员，购买附件查看
(MD5) e4b2e11aa3d5a1781748818241833126
(SHA256) fc1545e5af00676180b9684a5dedbe71b57ad01b7e0cb127ffad64ac074979ac

FL2019R2.1.txt (350 Bytes, 下载次数: 0, 售价: 10 元)

2020-8-6 00:07 上传

点击文件名下载附件
FL2019R2.1

FlexLogger 2019 R2 Readme

April 2019

This file contains important information about FlexLogger, including system requirements, installation instructions, and supported hardware.

---

Overview

System Requirements

Installation Instructions

Product Security and Critical Updates

New Features

Supported Hardware

Accessing the Help

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

---

Overview

FlexLogger is application software for quick sensor configuration and data logging of mixed signals to verify electromechanical systems, all without programming.

Back to Top

---

System Requirements

FlexLogger has the following minimum system requirements:

Operating System	RAM/Processor	Required Software1
64-bit version of Windows 10/8.12/7 SP13 1024 x 768 resolution (1366 x 768 or higher recommended)	Pentium 4 G1 equivalent (Intel i5 equivalent or higher recommended) 4 GB disk space 4 GB RAM	NI-DAQmx software 18.5 or higher NI-XNET software 18.5 or higher
1 Required drivers are included with the FlexLogger installer. 2 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 requires Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates. 3 NI software is signed with a SHA-256 certificate. Windows 7 SP1 requires Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

Back to Top

---

Installation Instructions

NI automates FlexLogger installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Back to Top

---

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Back to Top

---

New Features2019 R2 (April 2019)

• Added hardware support for:
  
  • FD-11634
  • NI 9866
  • USB-8506
    
• Output support for CAN
• Input support for LIN
• Capability to add timestamped notes during test
• Lowpass and highpass Butterworth filter channels added to Channel Specification
• TSN synchronization feedback
• No limits on Slow/Medium/Fast/Digital sample rate configuration
• System memory monitoring and dynamic visualization settings
• Pull-up resistor support and threshold voltage support for the NI 9361
• Powered sensor support for the FD-11601
  

2019 R1 (December 2018)

• Added hardware support for:
  
  • NI 9231
  • FD-11601
  • FD-11614
  • TRC-8546 transceiver cable for the NI 9860
    
• Enhanced system visualization in Channel Specification
• Conditional events to automate outputs
• RMS and Mean averaging of channels added to Channel Specification
• Capture test metadata
• Improved graph visualization
• Analog input channel data filtering
• Ability to reassign I/O or automotive channel configurations
• Automatically log channel characteristics
• Screen visualization shows minimum and maximum data values in visible range
  

2018 R4 (September 2018)

• Static-level output, including added hardware support for:
  
  • C Series Voltage Output Modules
  • C Series Current Output Modules
  • C Series Digital Modules
  • C Series User Interface Module
    
• Add arbitrary metadata to a project
• Import and export data using NI SystemLink
• Support for control of output channel set points through NI SystemLink
  

Back to Top

---

Supported Hardware

The following lists detail the hardware models supported in FlexLogger.

CompactDAQCompactDAQ Chassis

• cDAQ-9171
• cDAQ-9174
• cDAQ-9178
• cDAQ-9179
• cDAQ-9181
• cDAQ-9184
• cDAQ-9185
• cDAQ-9188
• cDAQ-9188XT
• cDAQ-9189
• cDAQ-9191
  
  Note: FlexLogger supports synchronization between TSN-enabled CompactDAQ chassis (cDAQ-9185 and cDAQ-9189) provided they are a part of your local 802.1AS subnet. Refer to your chassis documentation, available on ni.com/manuals, for more information.
  
  

C Series Voltage Input Modules

• NI 9201
• NI 9202
• NI 9205
• NI 9206
• NI 9209
• NI 9215
• NI 9220
• NI 9221
• NI 9222
• NI 9223
• NI 9224
• NI 9225
• NI 9228
• NI 9229
• NI 9238
• NI 9239
• NI 9242
• NI 9244
• NI 9251
  

C Series Voltage Output Modules

• NI 9263
• NI 9264
• NI 9269
  

C Series Current Input Modules

• NI 9203
• NI 9208
• NI 9227
• NI 9246
• NI 9247
  

C Series Current Output Modules

• NI 9265
• NI 9266
  

C Series Voltage and Current Input Modules

• NI 9207
  

C Series Sound and Vibration Input Modules

• NI 9230
• NI 9231
• NI 9232
• NI 9234
• NI 9250
  

C Series Temperature Input Modules

• NI 9210
• NI 9211
• NI 9212
• NI 9213
• NI 9214
• NI 9216
• NI 9217
• NI 9226
  

C Series Universal Analog Input Modules

• NI 9218
• NI 9219
  

C Series Strain/Bridge Input Modules

• NI 9235
• NI 9236
• NI 9237
  

C Series Counter Input Modules

• NI 9361
  

C Series Digital Modules

• Serial Digital I/O Modules
  
  • NI 9375
    
    Note: The NI 9375 must have all lines set to input or to output in a project.
  • NI 9403
  • NI 9425
  • NI 9426
  • NI 9476
  • NI 9477
  • NI 9478
    
• Parallel Digital I/O Modules
  
  • NI 9344
  • NI 9401
  • NI 9402
  • NI 9411
  • NI 9421
  • NI 9422
  • NI 9423
  • NI 9435
  • NI 9436
  • NI 9437
  • NI 9472
  • NI 9474
  • NI 9475
  • NI 9481
  • NI 9482
  • NI 9485
    

Note: You cannot use parallel and serial modules together on the same FlexLogger project unless they are installed in separate cDAQ chassis.

C Series CAN Interface Modules

• NI 9861
• NI 9862
  

C Series Vehicle Multiprotocol Interface Modules

• NI 9860
  

CAN Interface Devices

• NI USB-8502
  

C Series LIN Interface Modules

• NI 9866
  

LIN Interface Devices

• NI USB-8506
  

FieldDAQVoltage Input Device for FieldDAQ

• FD-11601
• FD-11603
  

Sound and Vibration Input Device for FieldDAQ

• FD-11634
  

Strain/Bridge Input Device for FieldDAQ

• FD-11637
  

Temperature Input Device for FieldDAQ

• FD-11613
  

• FD-11614
  

Note: FlexLogger supports synchronization between TSN-enabled FieldDAQ devices provided they are a part of your local 802.1AS subnet. Refer to your device documentation, available on ni.com/manuals, for more information.

Back to Top

---

Accessing the Help

Refer to the FlexLogger Manual, accessible from Help»Online manual, for more information about using FlexLogger.

Back to Top

---

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Back to Top

---

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

Back to Top

---

Legal Information

Copyright

© 2017–2019 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

377046E-01