石鑫华视觉论坛

 找回密码
 注册会员
石鑫华视觉论坛» › 软件|驱动|说明手册下载 › NI软件下载 › NI ECU Measurement and Calibration Toolkit 2.1.2 Win ...
返回列表 发新帖
查看: 3291|回复: 0

[LV工具模块] NI ECU Measurement and Calibration Toolkit 2.1.2 Win32Eng NI电子控制单元测量和校准工具包ECUMC2.1.2下载

[复制链接]
石鑫华视觉
  • TA的每日心情
    怒
    昨天 08:04

    • 签到天数: 3384 天

    连续签到: 6 天

    [LV.Master]2000FPS
    发表于 2020-11-22 22:37:35 | 显示全部楼层 |阅读模式 来自：广东省东莞市 联通
    石鑫华视觉网|机器视视觉_商城_论坛|机器视觉光源_控制器|工业相机_镜头|机器视觉方案_系统|NI视觉|图像处理|东莞华视自动化科技

    注册登陆后可查看附件和大图，以及购买相关内容

    您需要 登录 才可以下载或查看，没有账号？注册会员

    x
    Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    NI ECU Measurement and Calibration Toolkit 2.1.2 Win32Eng NI电子控制单元测量和校准工具包ECUMC2.1.2下载

    ECU测量和校准工具包
    ECU测量和校准（ECUMC）工具包用于为电子控制单元（ECU）设计和验证提供测量和校准。
    ECU测量和校准工具包是LabVIEW、LabWindows/CVI和Microsoft C/C ++编程环境的软件附件。该软件支持通用测量和校准协议（Universal Measurement and Calibration Protocol，XCP）及CAN校准协议（CAN Calibration Protocol，CCP），提供了许多高级且易用的函数。这些协议可让用户可根据ASAM (.A2L)数据库文件的定义，读写内部ECU变量及特性。通过(.A2L)数据库文件，工具包自动应用所有换算信息并以工程单位返回数据，便于简单地分析、演示及记录。此外，该工具包还提供了常见应用的示例，例如使用一维到三维用户界面来测量ECU变量或控制ECU特性。LabWindows标志经Microsoft公司授权使用。Windows是Microsoft公司在美国和其他国家的注册商标。


    2.1.2（在NI官网还有2.1版本，但是我方未能找到相关资源，无法提供下载）
    文件大小: 215555104 字节 (205.57 MB)
    修改日期: 2010-04-25 05:59
    MD5: f347e6c52d0525f460fd9e04e67b9eb2（可秒传一致）
    SHA1: a23344c6b6aa7b4cd356c0d50348efcf3f73e9c0
    SHA256: 5d7ba4527bc2e7d7100fb43f5dce4153c853c8645b1075bfcb7f030dbf9694bf
    CRC32: b6a2d935

    百度网盘和NI官方下载地址：
    ECUMC2.1.2.txt (603 Bytes, 下载次数: 0, 售价: 10 元)

    ECU Measurement and Calibration Toolkit (ECU M&C) 2.1.2 Readme
    October 2008
    Thank you for using National Instruments products.
    For more information about this product, refer to ni.com/support.
    This file contains information about the ECU Measurement and Calibration Toolkit (ECU M&C) Software for Windows Vista/XP/2000 and LabVIEW™ Real-Time (RT). Information in this file is in the following sections:
    Documentation
    Installation
    Installing the ECU Measurement and Calibration Toolkit with a LabWindows/CVI Upgrade
    Supported Operating Systems
    Supported Software and Hardware
    Supported Development Environments
    ECU Simulator
    Using LabVIEW Real-Time (RT)
    New Features Compared to ECU M&C Toolkit 1.0
    New Features Compared to ECU M&C Toolkit 2.0
    New Features Compared to ECU M&C Toolkit 2.1
    Additional Programming Topics and Known Issues
    Bug Fixes
    Documentation
    The ECU Measurement and Calibration Toolkit User Manual is the primary reference document. This manual includes an introduction to the CAN Calibration Protocol (CCP) and Measurement and Calibration Protocol (XCP). It also explains how to get started with application development and includes a complete reference for all ECU M&C Toolkit functions.
    The ECU Measurement and Calibration Toolkit User Manual is in Adobe Acrobat Portable Document Format (PDF). You can download the Acrobat Reader for free at www.adobe.com.
    You can open the ECU Measurement and Calibration Toolkit User Manual from Start» Programs»National Instruments»ECU Measurement and Calibration Toolkit Manual.
    Links to the NI-CAN Hardware and Software Manual are in the online help for each NI-CAN function within the National Instruments LabVIEW and LabWindows™/CVI™ development environments.
    Online help for the NI-CAN features within Measurement & Automation Explorer (MAX) is in the MAX Help Topics menu. The MAX help topics for NI-CAN also include a link to the NI-CAN Hardware and Software Manual.
    Back to Top
    Installation
    Before installing the ECU M&C Toolkit software, log on as Administrator or as a user with Administrator privileges. The ECU M&C Toolkit software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the ECU M&C Toolkit software:
    • Insert the ECU M&C Toolkit software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your ECU M&C Toolkit Software CD.
    • The installation wizard guides you through the necessary steps to install the ECU M&C Toolkit software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
    • When the installation is complete, click Finish.
    Back to Top
    Installing the ECU Measurement and Calibration Toolkit with a LabWindows/CVI Upgrade
    When you execute a LabWindows/CVI upgrade, and you have an ECU Measurement and Calibration Toolkit installed on your computer, the ECU Measurement and Calibration Toolkit will support the earlier LabWindows/CVI version.
    If you want to use the ECU Measurement and Calibration Toolkit in the new LabWindows/CVI version, complete the following steps:
    • Uninstall the ECU Measurement and Calibration Toolkit using the Windows Control Panel ("Add or Remove Programs" / "National Instruments Software" / "NI ECU Measurement and Calibration Toolkit").
    • Reinstall the ECU Measurement and Calibration Toolkit. The installation routine now recognizes the new LabWindows/CVI version and installs the support for the new LabWindows/CVI.
    Please note that the ECU Measurement and Calibration Toolkit is no longer supported in the earlier LabWindows/CVI version after you complete these steps.
    Back to Top
    Supported Operating Systems
    This version of the ECU M&C Toolkit software supports only the following operating systems:
    • Windows Vista (32-bit and 64-bit)
    • Windows XP (32-bit)
    • Windows 2000 Service Pack 3
    For more information about using National Instruments hardware and software products with Windows Vista, refer to ni.com/vista.
    National Instruments recommends using Service Pack 2 when using the USB-847x interfaces in hyperthread or multicore/CPU environments on Microsoft Windows XP.
    Back to Top
    Supported Software and Hardware
    This version of the ECU M&C Toolkit software supports all NI-CAN Hardware that NI-CAN 2.5.3 or higher supports on Windows and LabVIEW RT.
    The ECU M&C Toolkit software supports only National Instruments CAN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.
    Note: PCMCIA-CAN and PCMCIA-CAN/2 interfaces are not supported on the 64-bit version of Windows Vista.
    Back to Top
    Supported Development Environments
    This version of the NI-CAN software supports the following development environments:
    • LabVIEW 7.1, 8.0, 8.5, and 8.6
    • LabVIEW Real-Time (RT) 7.1, 8.2, 8.5, and 8.6
    • LabWindows/CVI 7.1 and higher
    • Microsoft Visual C/C++ 6.0
    Back to Top
    ECU Simulator
    The ECU M&C Toolkit software simulates an ECU. All ECU M&C Toolkit examples are preconfigured to communicate with the ECU simulation using the ASAM 2MC CCPECU.A2L file if using CCP or the XCPECU.A2L file if using the XCP Slave Simulator.
    LabVIEW users using CCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at \\Examples\ECU MC\CCPECU.LLB.
    LabVIEW users using XCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at \\Examples\ECU MC\XCPECU.LLB.
    MS VC users using CCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at \ECU Measurement and Calibration Toolkit\MS Visual C\CCPECU.
    MS VC users using XCP can find the ECU simulator, seed-key DLL, and corresponding A2L file at \ECU Measurement and Calibration Toolkit\MS Visual C\XCPECU.
    Back to Top
    Using LabVIEW Real-Time (RT)
    To use the ECU M&C Toolkit on a LabVIEW RT system, you must download your ASAM 2MC database (*.A2L) file to the RT target. The LabVIEW Real-Time Engine running on the PXI LabVIEW Real-Time controller supports a File Transfer Protocol (FTP) server. You can access the LabVIEW RT target FTP server using any standard FTP utility for transferring files to and from the hard drive or CompactFlash. For further information about how to download your A2L file to the RT target, refer to LabVIEW Real-Time (RT) Configuration in the ECU Measurement and Calibration Toolkit User Manual.
    Back to Top
    New Features Compared to ECU M&C Toolkit 1.0
    The ECU M&C Toolkit 2.1 release adds the following features:
    • Support for Universal Measurement and Calibration Protocol (XCP) on CAN and Ethernet (TCP and UDP).
    • New property for Measurements and Characteristics: Comment.
    • New property for DAQ Lists: Samples Pending.
    Back to Top
    New Features Compared to ECU M&C Toolkit 2.0
    The ECU M&C Toolkit 2.1 release adds the following features:
    • Support for LabVIEW 8.2.0.
    • New MC DAQ List Initialize VI for LabVIEW and mcDAQListInitialize function for C define a DAQ list on a specific DAQ list number.
    • Support for the 32 and 64-bit versions of Windows Vista.
    • You now can write the X axis of a characteristic using the mcPropChar_X_Axis property.
    • You now can write the Y axis of a characteristic using the mcPropChar_Y_Axis property.
    • You can change the byte order of a characteristic from Intel to Motorola and vice versa using the mcPropChar_ByteOrder property.
    • You can change the byte order of a measurement from Intel to Motorola and vice versa using the mcPropMeas_ByteOrder property.
    • Support for NI USB-8473 (1-port, High-Speed CAN, USB interface) and NI USB-8473s (1-port, High-Speed CAN, USB interface with synchronization).
    Back to Top
    New Features Compared to ECU M&C Toolkit 2.1
    The ECU M&C Toolkit 2.1.1 release adds the following features:
    • Support for LabVIEW 8.5 and 8.6.
    • Support for LabWindows/CVI 8.5.
    • New set of functions to generate measurements without an A2L database (mcECUCreate, mcConversionCreate, mcEventCreate, and mcMeasurementCreate).
    • New read mode for DAQ List to acquire DAQ List data as timestamped value pairs.
    • You can activate address mapping if defined in an A2L database using the mcPropECU_MappingMode property.
    • You can specify distinct mapping directions if defined in an A2L database using the mcPropECU_MappingSource and mcPropECU_MappingTarget properties.
    • You can deactivate the use of the CCP command EXCHANGE_ID, which is used by default when a connection to an ECU is initiated.
    • You can deactivate the use of all optional CCP commands such as GET_SEED, UNLOCK, DNLOAD_6, and more using the related properties mcPropOptCmd_xxx.
    Back to Top
    Additional Programming Topics and Known Issues
    ECU M&C Toolkit 2.1 supports CCP Version 2.1.
    ECU M&C Toolkit 2.1 does not support symbolic conversion tables for characteristics and measurement channels.
    NI-Spy monitors function calls to the ECU M&C Toolkit API. This tool helps in debugging programming problems in the application. To launch this tool, open the Software branch of the MAX Configuration tree, right-click NI Spy, and select Launch NI Spy. If more than one National Instruments driver is installed on your computer, you can specify which APIs to spy on at any time. By default, all installed APIs are enabled. To select the APIs to spy on, select Spy»Options, select the View Selections tab, and select the APIs under Installed API Choices.
    The following LabVIEW example VIs do not run under LabVIEW Real-Time and LabVIEW Base Development System:
    • Edit a characteristic.vi
    • Measurement and Calibration Application.vi
    To make these examples run, remove the subVI call from 3DDisplayWrapper.vi in MCCharacteristicsEditors.llb.
    If you are using an NI USB-8473 or NI USB-8473s, the ECU M&C Toolkit is based internally on the NI-CAN Frame API. For this reason, the following properties are not available for the GetProperty function:
    • CRO Task (mcPropCRODAQ_DTO_Task)
    • DTO Task (mcPropDAQ_DTO_Task)
    • SamplesPending (mcPropDAQ_SamplesPending)
    Back to Top
    Bug Fixes
    The following items are the IDs and titles of a subset of issues fixed between ECU M&C Toolkit 2.1.0 and ECU M&C Toolkit 2.1.2.
    If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the ECU M&C Toolkit.
    Bug IDFixed Issue
    105783Fixed the issue that the XCP Spy does not analyze the byte order.
    105788Fixed the issue that a XCP DAQ Lists does not work correctly if GET_DAQ_PROCESSOR_INFO is not implemented in the ECU.
    Back to Top
    © 2005–2008 National Instruments Corporation. All rights reserved.
    电子控制单元测量和校准工具包, ECUMC2_1_2, NI ECU Measurement and Calibration, ECU Measurement and Calibration 2_1_2, 测量和校准协议, CAN校准协议

    相关帖子

    NI VBAI 2023视频教程《NI Vision Builder for Automated Inspection 2023视频教程》
    回复

    使用道具 举报

    返回列表 发新帖
    高级模式
    B Color Image Link Quote Code Smilies
    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程（24.09）
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解2020-2024》教程-NI Vision所有函数使用方法介绍，基于NI VISION2020，兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-11-23 01:55

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表