NI FlexRIO Adapter Module Support 3.3 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件3.3下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI FlexRIO Adapter Module Support 3.3 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件3.3下载

NI FlexRIO适配器模块支持
NI FlexRIO Adapter Module Support为FlexRIO适配器模块提供LabVIEW支持。
NI FlexRIO Adapter Module Support是一款驱动软件，可支持并访问FlexRIO适配器模块的I/O，包括数字化仪、收发仪、信号发生器、射频和DIO适配器模块。该软件还提供示例来帮助用户开始使用各种FlexRIO适配器模块。必须安装NI-FlexRIO才可使用该软件。

Win32Eng
3.3
文件大小: 209223701 字节 (199.53 MB)
修改日期: 2013-05-17 23:45
MD5: 1727c2a180c8a60e326cfa1d34f2a4d2（官方正确）
SHA1: b8a4e66c4da87b09ad1b5ee2ace26ba9cf6658b5
SHA256: 7ef5eba470ccca99f128c324b0cb859f5acaa4c56ace9c4ea91519f0a300340d
CRC32: c7dc632d

百度网盘和NI官方下载地址：
FlixeRIOAMS3.3.txt (622 Bytes, 下载次数: 0, 售价: 10 元)

2020-12-30 23:21 上传

点击文件名下载附件

NI FlexRIO™ Adapter Module Support Readme

Version 3.3

---

Thank you for using NI FlexRIO Adapter Module (FAM) Support. This file contains important information about the NI FlexRIO Adapter Module Support software, and it is organized into the following sections:

• New Features
• Supported Hardware
• System Requirements
• Application Development Environments (ADEs)
• Installing NI FlexRIO Adapter Module Support 3.3
• Supported Platforms
• Uninstalling/Modifying NI FlexRIO Adapter Module Support
• Bug Fixes
• Automating the Installation of NI Products
• Documentation
  

---

New Features

NI FlexRIO Adapter Module Support 3.3 includes the following new features:

• Added support for the NI 5792 FAM and the NI 5793 FAM
  

Supported Hardware

NI FlexRIO Adapter Module Support software supports the following NI FlexRIO adapter modules:

• NI 5731
• NI 5732
• NI 5733
• NI 5734
• NI 5751
• NI 5752
• NI 5761
• NI 5762
• NI 5771
• NI 5772
• NI 5781
• NI 5782
• NI 5791
• NI 5792
• NI 5793
• NI 6581
• NI 6583
• NI 6584
• NI 6585
• NI 6587
  

System RequirementsSupported Operating Systems

FAM Support 3.3 supports the following operating systems:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 3 (32-bit)
  

Note  FAM Support 3.3 does not support Windows Server non-R2 editions.

NI recommends that you have the most recent service pack for your operating system installed.

Supported Real-Time Operating Environments

FAM Support 3.3 supports the following real-time operating environments:

• LabVIEW Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  
  • Windows XP: 128 MB
  • Windows 7/Windows Vista: 512 MB
    
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 7/Vista/XP, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  
  • Windows XP: 256 MB
  • Windows 7/Windows Vista: 1 GB
    
• A screen resolution of 1,024 x 768
• Windows 7/Vista/XP, with all available critical updates and service packs
  

Application Development Environments (ADEs)

• LabVIEW 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 (32-bit), or 2012 (64-bit)
  

Installing NI FlexRIO Adapter Module Support 3.3 with LabVIEW 2010 SP1 Examples

Complete the following steps to install NI FlexRIO Adapter Module Support 3.3:

• Install LabVIEW 2010 SP1.
• (Optional) Install LabVIEW Real-Time 2010 SP1.
• Install LabVIEW FPGA 2010 SP1.
  
  Note: In the LabVIEW FPGA installation menu, you must also install the Compilation Tools for FPGA Devices other than Virtex-II to use these examples.
• Install NI-RIO 12.0.
• Install NI FlexRIO Adapter Module Support 3.3.
  

Installing NI FlexRIO Adapter Module Support 3.3 with LabVIEW 2011 Examples

Complete the following steps to install NI FlexRIO Adapter Module Support 3.3:

• Install LabVIEW 2011.
• (Optional) Install LabVIEW Real-Time 2011.
• Install LabVIEW FPGA 2011.
  
  Note: In the LabVIEW FPGA installation menu, you must also install the Compilation Tools for FPGA Devices other than Virtex-II to use these examples.
• Install NI-RIO 12.0.
• Install NI FlexRIO Adapter Module Support 3.3.
  

Installing NI FlexRIO Adapter Module Support 3.3 with LabVIEW 2012 Examples

• Install LabVIEW 2012.
• (Optional) Install LabVIEW Real-Time 2012.
• Install LabVIEW FPGA 2012.
  
  Note: In the LabVIEW FPGA installation menu, you must also install the Compilation Tools for FPGA Devices other than Virtex-II to use these examples.
• Install NI-RIO 12.0.
• Install NI FlexRIO Adapter Module Support 3.3.
  

Note: Visit ni.com/info and enter rdsoftwareversion as the Info Code for more information about which minimum software versions you need for your device.

Supported Platforms

NI FlexRIO Adapter Module Support 3.3 supports the following platforms:

• Windows 7 Professional (32-bit and 64-bit)
• Windows Vista Business (32-bit and 64-bit)
• Windows XP Professional (32-bit)
  

Uninstalling/Modifying NI FlexRIO Adapter Module Support

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add or Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI FlexRIO Adapter Module Support 3.3 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI FlexRIO Adapter Module Support 3.3 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Bug Fixes

• Updated CLIP for the 575x adapter modules fixes the compile issue on Linux Workers.
  

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.3 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Documentation

The product documentation is available at Start»All Programs臧ational Instruments»NI FlexRIO. Visit ni.com/manuals for the latest versions of product documentation. The documentation set is composed of the following documents:

• NI FlexRIO FPGA Module Installation Guide and Specifications
• NI FlexRIO FPGA Module Specifications
• FlexRIO adapter module (FAM) User Manuals and Specifications
• NI FlexRIO Adapter Module Support
• NI FlexRIO Help
• Getting Results manuals for FPGA modules
  

To view these documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Refer to ni.com/flexrio for additional NI FlexRIO product support and information.

---

Important Information

Copyright

© 2008–2013 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\EULAs directory.
• Review \_Legal Information\_Legal Information.txt for information on including legal information in installers built with NI products.