NI FlexRIO Adapter Module Support 14.0 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件14.0下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI FlexRIO Adapter Module Support 14.0 Driver Win32Eng NI FlexRIO适配器模块支持驱动软件14.0下载

NI FlexRIO适配器模块支持
NI FlexRIO Adapter Module Support为FlexRIO适配器模块提供LabVIEW支持。
NI FlexRIO Adapter Module Support是一款驱动软件，可支持并访问FlexRIO适配器模块的I/O，包括数字化仪、收发仪、信号发生器、射频和DIO适配器模块。该软件还提供示例来帮助用户开始使用各种FlexRIO适配器模块。必须安装NI-FlexRIO才可使用该软件。

Win32Eng
14.0
文件大小: 397418059 字节 (379.01 MB)
修改日期: 2014-10-09 01:56
MD5: 7e9f8508d127da4797c055ee26d0eacf（官方正确）
SHA1: 44cf0c441d4b07b80ee7f5d396e5f12fbd603675
SHA256: 12d2900314e526ce465660e3ce3066ff42100df18dbe3c48f60259b497bea9db
CRC32: 5d0a5ae6

百度网盘和NI官方下载地址：
FlixeRIOAMS14.0.txt (664 Bytes, 下载次数: 0, 售价: 10 元)

2020-12-30 23:25 上传

点击文件名下载附件

NI FlexRIO™ Adapter Module Support Readme

Version 14.0

---

Thank you for using NI FlexRIO Adapter Module (FAM) Support. This file contains important information about the NI FlexRIO Adapter Module Support software, and it is organized into the following sections:

• New Features
• Supported Software
• Supported Hardware
• System Requirements
• Application Development Environments (ADEs)
• Installing NI FlexRIO Adapter Module Support 4.0
• Supported Platforms
• Uninstalling/Modifying NI FlexRIO Adapter Module Support
• Automating the Installation of NI Products
• Documentation
  

---

New Features

FAM Support 14.0 includes the following new features:

• Added LabVIEW 2014 Vivado support for the following NI FlexRIO adapter modules:
  
  • NI 5761
  • NI 5771
  • NI 5772
  • NI 5782
  • NI 5791
  • NI 5792
  • NI 5793
    

Supported Software

FAM Support 14.0 supports the following software:

• LabVIEW 2014 (32-bit and 64-bit)
• LabVIEW 2013 (32-bit and 64-bit)
  

Supported Hardware

NI FlexRIO Adapter Module Support software supports the following NI FlexRIO adapter modules:

• NI 5731
• NI 5732
• NI 5733
• NI 5734
• NI 5751
• NI 5752
• NI 5761
• NI 5762
• NI 5771
• NI 5772
• NI 5781
• NI 5782
• NI 5791
• NI 5792
• NI 5793
• NI 6581
• NI 6583
• NI 6584
• NI 6585
• NI 6587
  

System RequirementsSupported Operating Systems

FAM Support 14.0 supports the following operating systems:

Operating System	64-bit	32-bit
Windows 8.x	✔	✔
Windows 7 Professional	✔	✔
Windows Vista Business	✔	✔
Windows XP Professional SP3	—	✔
Windows Server 2012 R2	✔	—
Windows Server 2008 R2	✔	—
Windows Server 2003 R2	—	✔

Note  FAM Support 14.0 does not support Windows Server non-R2 editions.

NI recommends that you have the most recent service pack for your operating system installed.

Supported Real-Time Operating Environments

FAM Support 14.0 supports the following real-time operating environments:

• LabVIEW Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  
  • Windows XP: 128 MB
  • Windows 8.1/8/7/Windows Vista: 512 MB
    
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 8.1/8/7/Vista/XP, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  
  • Windows XP: 256 MB
  • Windows 8/7/Windows Vista: 1 GB
    
• A screen resolution of 1,024 x 768
• Windows 7/Vista/XP, with all available critical updates and service packs
  

Application Development Environments (ADEs)

NI FlexRIO Adapter Module (FAM) Support 14.0 supports the following ADEs:

• LabVIEW 2014 (32-bit or 64-bit) and LabVIEW 2013 (32-bit or 64-bit)
  

Installing NI FlexRIO Adapter Module Support 14.0

Complete the following steps to install NI FlexRIO Adapter Module Support 14.0.

• Install LabVIEW.
• (Optional) Install LabVIEW Real-Time.
• Install LabVIEW FPGA.
  
  Note: In the LabVIEW FPGA installation menu, you must also install the Compilation Tools for FPGA Devices other than Virtex-II to use these examples.
• (Optional) Install NI-RIO 14.0.
• Install NI FlexRIO Adapter Module Support 14.0.
  

Note: Visit ni.com/info and enter rdsoftwareversion as the Info Code for more information about which minimum software versions you need for your device.

Supported Platforms

NI FlexRIO Adapter Module Support 14.0 supports the following platforms:

• Windows 8 (32-bit and 64-bit)
• Windows 7 Professional (32-bit and 64-bit)
• Windows Vista Business (32-bit and 64-bit)
• Windows XP Professional (32-bit)
  

Uninstalling/Modifying NI FlexRIO Adapter Module Support

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add or Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI FlexRIO Adapter Module Support 14.0 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI FlexRIO Adapter Module Support 14.0 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 8, complete the following steps:

• Right-click on the Start screen.
• Select All apps and launch the Control Panel.
• Select Programs» Programs and Features.
• Select National Instruments Software
• Click the Uninstallbutton.
• Select NI FlexRIO Adapter Module Support 14.0 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 4.0 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Documentation

The product documentation is available at Start»All Programs臧ational Instruments»NI FlexRIO. Visit ni.com/manuals for the latest versions of product documentation. The documentation set is composed of the following documents:

• NI FlexRIO FPGA Module Installation Guide and Specifications
• NI FlexRIO Adapter Module (FAM) User Manuals and Specifications
• NI FlexRIO Adapter Module Support
• NI FlexRIO Help
• Getting Results manuals for FPGA modules
  

To view these documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Refer to ni.com/flexrio for additional NI FlexRIO product support and information.

---

Important Information

Copyright

© 2008–2014 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\EULAs directory.
• Review \_Legal Information\_Legal Information.txt for information on including legal information in installers built with NI products.