注册登陆后可查看附件和大图,以及购买相关内容
您需要 登录 才可以下载或查看,没有账号?注册会员
x
Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Industrial Communications for DeviceNet 2.3 Driver Win32Eng NI-DNet工业通信软件驱动程序2.3下载
NI DeviceNet工业通信软件
NI-Industrial Communications for DeviceNet可帮助您配置和控制DeviceNet网络上DeviceNet设备。
NI-Industrial Communications for DeviceNet是一种驱动程序软件,为您使用DeviceNet接口设备、C系列DeviceNet接口模块和PXI DeviceNet接口模块提供所需的支持。它包含丰富的LabVIEW VI和属性库,因此您可以为兼容的硬件设备创建自定义的DeviceNet应用程序。
Win32Eng
2.3
文件大小: 446780192 字节 (426.08 MB)
修改日期: 2013-09-16 23:11
MD5: 63f105f92a67f32d53aae8b032286c19(官方正确)
SHA1: 588f240fd2c21e2a8edf9a64da9d03bdbc27bab1
SHA256: 22c6ca8c056aad13b82b0fb37009fca972331d0eca446bb24cafe0b28301363d
CRC32: 005f99eb
百度网盘与NI官方下载地址:
DNET2.3.txt
(614 Bytes, 下载次数: 0, 售价: 10 元)
NI-Industrial Communications for DeviceNet 2.3 ReadmeAugust 2013 This file contains important information about NI-Industrial Communications for DeviceNet for Windows and LabVIEW Real-Time environment, including new features and changes, the installation and upgrade issues, compatibility issues, and a partial list of bug fixes. Note The NI-IndCom for DeviceNet 2.3 software requires the NI 9882 module with the upgraded firmware. When you upgrade your software to the 2.3 version, check the software version of the CD that shipped with your NI 9882 module.
If the version is not 2.3 or you are not sure of the version number, National Instruments recommends that you upgrade the firmware. Otherwise, when you use NI-IndCom for DeviceNet 2.3, firmware images corrupt or get mismatched.
Make sure you have appropriate hardware and software installed and complete one of the following tasks to upgrade the firmware.- If you are using cRIO-9111, cRIO-9112, cRIO-9113, cRIO-9114, cRIO-9116, cRIO-9118, cRIO-9081, or cRIO-9082 with LabVIEW 2012 or later, double-click ModuleFirmwareUpgrade.exe in the National Instruments\NI-IndCom for DeviceNet\Utilities directory and follow the instructions in this utility to upgrade the firmware.
- If you are using other chassis with LabVIEW 2013 or later, double-click Firmware_Upgrade_Instructions.html in the National Instruments\NI-IndCom for DeviceNet directory and follow the instructions to use a LabVIEW example project to upgrade the firmware.
New Features and Changes DeviceNet 2.3 DeviceNet 2.2 DeviceNet 2.1 DeviceNet 2.0.2 DeviceNet 2.0.1 DeviceNet 2.0 System Requirements Installation Instructions Accessing the Help Finding Examples Bug Fixes Compatibility with NI-DNET 1.x Automating the Installation of NI Products How to Use NI Software with Microsoft Windows 8 NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
New Features and ChangesDeviceNet 2.3- Added FPGA VIs to operate the NI 9882 modules on the NI-RIO targets
- Added support for cRIO-9068
- Added support for LabVIEW 2013 (32-bit) and LabVIEW 2013 Real-Time Module
DeviceNet 2.2- Added slave support for NI 9882, PCI-8532, and PXI-8532
- Added VIs for reading and writing the raw CAN frames
- Added an example VI for monitoring and analyzing DeviceNet packets
- Added support for LabVIEW 2012 (32-bit) and LabVIEW 2012 Real-Time Module
DeviceNet 2.1- Added support for NI 9882 1-Port DeviceNet Module for NI CompactRIO
- Added NI-DNET 1.x compatible LabVIEW VIs
DeviceNet 2.0.2- Added support for LabVIEW 2011 (32-bit) and LabVIEW 2011 Real-Time Module
DeviceNet 2.0.1- Added support for LabVIEW 2010 (32-bit) and LabVIEW 2010 Real-Time Module
DeviceNet 2.0- Supported NI DeviceNet hardware: PCI-8532 and PXI-8532
- Supported LabVIEW 2009 (32-bit) and LabVIEW 2009 Real-Time Module
System RequirementsSupported Operating SystemsYou must install and run the NI-IndCom for DeviceNet software on the following operating systems: - Windows 8 (32-bit and 64-bit)
- Windows 7 (32-bit and 64-bit)
- Windows Vista (32-bit and 64-bit)
- Windows XP SP3 (32-bit)
- Windows Server 2003 R2 (32-bit)
- Windows Server 2008 R2 (64-bit)
The NI-IndCom for DeviceNet installer does not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions. Supported Hardware and SoftwareRefer to KB 6CCA8MEG, Supported Hardware and Software for NI-Industrial Communications for DeviceNet, for a complete list of NI hardware and software supported by each version of the NI-IndCom for DeviceNet. The maximum number of devices you can connect to a DeviceNet interface depends on the electrical characteristics of the devices on the network. If all of the devices on the network meet the DeviceNet specifications, you may connect 64 devices to the network. Caution The NI-IndCom for DeviceNet software does not support the previous generation of the DeviceNet hardware products such as PCI-DNET, PCMCIA-DNET, and PXI-8461/D. Those products require an NI-DNET 1.x driver. Installation InstructionsBefore installing the NI-IndCom for DeviceNet software, log on as Administrator or as a user with Administrator privileges. The NI-IndCom for DeviceNet software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-IndCom for DeviceNet software: - Insert the NI-IndCom for DeviceNet software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-IndCom for DeviceNet software CD.
- The installation wizard guides you through the necessary steps to install the NI-IndCom for DeviceNet software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking the Cancel button.
- When the installation is complete, click the Finish button.
Installing the Software on a Real-Time TargetComplete the following steps to install the NI-IndCom for DeviceNet software on a real-time target in Measurement & Automation Explorer (MAX): - Expand Remote Systems in the configuration tree and expand your real-time target.
- Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.
- If the real-time target is a CompactRIO controller, select the Custom software installation option.
- Select the NI-IndCom for DeviceNet item in the feature list and click the Next button.
- Follow the remaining installation instructions until installation is complete.
NI-IndCom for DeviceNet Updates and NotificationsNational Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information. Accessing the HelpRefer to the NI-Industrial Communications for DeviceNet Help, accessible by selecting Help»NI-Industrial Communications for DeviceNet in LabVIEW, for information about using the NI-IndCom for DeviceNet software. Finding ExamplesLabVIEW examples for the NI-IndCom for DeviceNet software are in the labview\examples\NI-Industrial Communications for DeviceNet folder. You can modify an example VI to fit an application or copy and paste from one or more examples into a VI you create. Bug FixesThe following table contains the ID and title of the issue fixed in the NI-IndCom for DeviceNet 2.1. This table is not an exhaustive list of issues fixed in the current version of NI-IndCom for DeviceNet. ID | Fixed Issue | 198387 | Explicit messaging function block help does not explain how to write attributes | 185016 | PCI/PXI 8532 boards manual lacks hardware specifications section |
The following table contains the ID and title of the issue fixed in the NI-IndCom for DeviceNet 2.0.2. This table is not an exhaustive list of issues fixed in this version of NI-IndCom for DeviceNet. ID | Fixed Issue | 288931 | DeviceNet deployment executable fails to execute on a machine without LabVIEW | Compatibility with NI-DNET 1.xNI-Industrial Communications for DeviceNet 2.1 or later is not an update for NI-DNET 1.x and the two products can be installed on the same system side by side. DeviceNet 2.1 or later provides NI-DNET 1.x compatible VIs, so the application using NI-DNET 1.x VIs can work with DeviceNet 2.1 or later on PCI-8532, PXI-8532 and NI 9882 with very limited code change. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher. Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it. Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. | Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary: Current Application | Icon Location | Pin to Action | Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar | Windows 8 Desktop | Start screen | Right-click application and select Pin to Start | Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen | Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type. For more information about NI support for Windows 8, visit ni.com/windows8. NI-IndCom for DeviceNet Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016NI-IndCom for DeviceNet will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-IndCom for DeviceNet that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes: Product | Info Code | NI LabVIEW | lifecycle | NI LabWindows™/CVI™ | cvi_lifecycle | NI Measurement Studio | mstudiolifecycle | NI TestStand | tslcp | NI DIAdem | ddlcp | NI SignalExpress | selcp | NI VeriStand | nivslifecycle |
Important InformationCopyright ©2009–2013 National Instruments. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the \_Legal Information and directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments. Patents For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. |